Oumefar Timer Delay Relay XY-LJ02 Cycle Trigger Delay Timer Switch Circuit Electronic Relay Module with LCD Display, 12V Timer Relay Delay Controller Module Support Micro USB 5V Input

Price: $12.09
(as of Jan 30,2025 12:22:16 UTC – Details)

Product Description

Timing Range:

0.01 seconds (minimum) – 9999 minutes (maximum) continuously adjustable

How to Choose the Timing Range:

In the OP/CL parameter modification interface, short press the STOP button to select the timing range;

XXXX has no decimal point, and the timing range is 1s – 9999s

XXX.X Decimal point in the tenth place, timing range 0.1s – 999.9s

XX.XX Decimal point is in the hundredth place, timing range 0.01s – 99.99s

X.X.X.X full decimal point, timing range 1min – 9999min

For example, if you want to set the OP to 3.2 seconds, then move the decimal point to the ten, the LCD display 003.2

Parameter Description: OP on time, CL off time, LOP cycle times (1-9999 times, “—-” represents infinite cycles)

Features

Trigger Signal Source:

High level trigger (3.0V-24V), low level trigger (0.0V-0.2V), switch control (passive switch)

Output Capability: Control devices within 30V 5A DC or within 220V 5A AC

Quiescent Current: 15mA

Working Current: 50mA

Service Life: More than 100,000 times

Working Temperature: -40-85 ℃

Parameter Item Type: Loop Timing Module Material: Plastic Color: As Pictures Shown Size: Approx. 8.0 x 3.8 x 1.9cm/3.1 x 1.5 x 0.7in Working Voltage: 6-30V support micro USB 5.0V power supply

Operating Mode:

P1: After the signal is triggered, the relay is turned on for the OP time and then turned off; within the OP time, the signal is triggered again invalid

P2: After the signal is triggered, the relay turns on the OP time and then turns off; within the OP time, the signal is triggered again to retime

P3: After the signal is triggered, the relay is turned on for OP time and then disconnected; within OP time, the signal is triggered again to reset, the relay is turned off, and the timing is stopped

P4: Give the trigger signal, after the relay is turned off CL time, the relay is turned on OP time, after the timing is completed, the relay is turned off;

P5: Give the trigger signal, after the relay turns on the OP time, the relay turns off the CL time, and then cycle the above actions, and the signal is given again in the cycle, the relay is turned off, and the timing is stopped; the number of cycles (LOP) can be set;

P6: No trigger signal is required after power-on, the relay turns on the OP time, the relay turns off the CL time, and the above actions are cycled; the number of cycles (LOP) can be set;

P7: signal hold function If there is a trigger signal, the timing is cleared and the relay remains on; when the signal disappears, the relay is turned off after the timing OP; when there is another signal during the timing, the timing is cleared;

1. Parameter Setting

a) Enter the setting interface by long pressing SET button;

b) First set the working mode, the working mode flashes reminder, set the working mode by short pressing the UP/DOWN key;

c) Short press SET button to select the working mode and enter the system parameter setting;

d) On the system parameter setting interface, short press SET button to switch the system parameter to be modified, short press/long press UP/DOWN button to modify;

(Note: Short press SET in P-1-p-3, P-7 mode is not valid )

e) On the OP/CL parameter modification interface, short press STOP to switch the timing unit (1s/0.1s/0.01s/1min)

f) After all parameter settings are completed, long press the SET button to save the parameter settings and exit the setting interface

Additional Function:

a) Automatic sleep function: In the running interface, long press the STOP button to start or close the automatic sleep function (L-P select on to start the sleep function, off to turn off the sleep function);

b) Relay function selection: In the running interface, by short pressing the STOP button, start or close the relay function,’on’ satisfies the conduction condition, the relay normally conducts,’OFF’ satisfies the conduction condition, the relay does not conduct;’OFF’ In the state, the system flashes to show’OUT’;

c) Parameter view: On the running interface, short press SET button to display the current parameter settings of the system, which does not affect the normal operation of the system;

d) Display content switching: In P-5 P-6 mode, switch display content (run time/cycle times) by short pressing DOWN key;

Item model number ‏ : ‎ Oumefarpegbw7acsz
Date First Available ‏ : ‎ October 14, 2020
Manufacturer ‏ : ‎ Oumefar
ASIN ‏ : ‎ B08L5VYSV1
Country of Origin ‏ : ‎ China

【LCD Display Timer】: This XY-LJ02 Cycle Trigger Timer Delay Relay has designed with LCD Display screen, and the current mode and parameters are clear at a glance, timer relay is very clear, simple and practical, hope can meet your demand.
【Cycle Trigger】: The Cycle Trigger Timer Delay Relay support high and low level trigger, and switch control, timer relay is suitable for most occasions, and you don’t have to worry about the working performance of this Timer Delay Relay.
【Support USB】: This XY-LJ02 Cycle Trigger Timer Delay Relay has wide voltage power supply (6-30V), and timer relay supports micro USB 5.0V power supply, timer relay is very convenient to use and will save your time and energy.
【Emergency Stop】: The Cycle Trigger Timer switch has a key emergency stop function (STOP key), with reverse connection protection, reverse connection does not burn the circuit, timer relay can be good helper to you.
【After Sale Service】: We are committed to bringing you a comfortable experience. If you have any questions about this Cycle Trigger Timer, please feel to us immediately,and we will serve you wholeheartedly.

Introducing the Oumefar Timer Delay Relay XY-LJ02 Cycle Trigger Delay Timer Switch Circuit Electronic Relay Module with LCD Display!

This innovative 12V Timer Relay Delay Controller Module is designed to support Micro USB 5V Input, making it versatile and convenient for a variety of electronic applications. With its LCD Display, you can easily program and monitor the timer settings with precision.

Whether you need to trigger a delay in a circuit or control the timing of a specific process, this Timer Delay Relay Module is the perfect solution. Its Cycle Trigger Delay Timer Switch feature allows for customizable delays, giving you full control over your electronic projects.

Say goodbye to manual timing and hello to efficiency with the Oumefar Timer Delay Relay XY-LJ02. Upgrade your electronic setups today and experience the convenience of a reliable timer relay module. Get yours now! #TimerDelayRelay #ElectronicModule #LCDdisplay #12VTimerRelay #MicroUSBInput
#Oumefar #Timer #Delay #Relay #XYLJ02 #Cycle #Trigger #Delay #Timer #Switch #Circuit #Electronic #Relay #Module #LCD #Display #12V #Timer #Relay #Delay #Controller #Module #Support #Micro #USB #Input,5 programmable buttons