Proxicast Vandal Resistant 2×2 MIMO Low Profile 4G/5G Omni-Directional Screw Mount Antenna – 10 ft Coax Leads – for Cisco, Cradlepoint, Digi, Pepwave, Sierra Wireless and Others (ANT-121-M22)
Price: $89.95
(as of Dec 02,2024 02:06:40 UTC – Details)
Product Description
Proxicast Low Profile Screw Mount 4G/5G MIMO Omni Antenna #ANT-121-M22
Key Features
Vandal Resistant
High Impact ABS RadomeThick Mounting PostNot Removable from OutsideNo Exposed Coax Cabling
Weatherproof
Water & Dust ProofIP67 RatedAdhesive Rubber Gasket between Antenna and Mounting Surface
Inconspicuous
3 Inches TallSimple Geometric ShapeOmnidirectional CoveragePaintable to Blend into Surroundings
Universal Compatiblity
Any MIMO Capable 4G/5G Device with 2 SMA JacksAny 4G/5G, FirstNet or CBRS NetworkAT&T, T-Mobile, VerizonBell, Rogers, Telus
Proxicast Vandal Resistant 2×2 MIMO Low Profile 4G/5G Omni-Directional Screw Mount Antenna
This low profile (~3 inches tall) fixed mount omni-directional antenna is a solution for today’s state-of-the-art multi-antenna wireless systems (5G & 4G/LTE). It offers 3 to 4 dBi of gain and support for all 4G/5G cellular frequency bands on AT&T, Verizon, T-Mobile, Bell, Rogers, Telus and other carriers worldwide.
Permanently mounts via a 1/2 in. (12 mm) hole. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an thick threaded mounting post. Includes two 10 ft strands of paired low-loss LMR 100 coax fed through the center mounting post. Includes an “L” bracket for optional wall mounting. Completely waterproof (IP67).
Integrated SMA male plug connectors mate with SMA female jacks found on most cellular modems and routers. The single lead version of this antenna is part # ANT-121-002 and the 4×4 MIMO version is ANT-121-M44
* For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter.
Technical Specifications
Frequency Range 600-6000 MHz – all 4G & 5G Sub-6 (FR1) Bands Peak Gain 3-4 dBi frequency dependent Impedance 50 Ohm VSWR < 2.0:1 Polarization Vertical Connector 2x SMA Male Coax Length 10 ft (3m) low-loss LMR100 coax Mounting Screw mounted via a 1/2 in. (12 mm) hole with M12x1 internal nut; optional wall bracket included Ground Plane Min 8 inch diameter metal surface Dimensions Height 3.2 in (82 mm); Diameter 1.9 in (48 mm) Weight 6.2 oz (176 g) Materials UV stabilized ABS plastic (black) + Nickel-plated brass Operating Temperature -40°C to +70°C Full Specification Sheet Download PDF under the Product Guides and Documents section of this listing Model Number ANT-121-M22
Application Examples
Vending Machines
Monitor your fleet of vending machines for:
Inventory LevelsMachine StatusAdvertising UpdatesPrice Changes
ATMs & Kiosks
Push updates to and collect remote data from:
Bank MachinesSelf Service KiosksDigital SignageAlarm Systems
Machine Control Panels
Perform remote diagnostics, maintenance and data collection on:
PLC’sNEMA EnclosuresWeather StationsMeters & Pump Houses
Emergency Vehicles
Keep first responders connected to the Internet:
Police / FireAmbulance / EMSHazmatCommand & Control
For Best Results
Orient antenna verticallyMount through a horizontal metal surface at least 8 inches in diameterDo not use a Y cable to connect 2 antenna leads to 1 modem portDo not extend coax cablesFully tighten coax connectors to modem antenna portsStand 3+ feet away from antenna when testingMaximize signal Quality (SINR, RSRQ) not signal Strength (RSSI, RSRP, bars)
LOW PROFILE ~ 3 inches Tall with 3-4 dBi Gain — Omni-directional MIMO — Indoor/Outdoor Use
2 SMA MALE CONNECTORS on 10 ft Coax Leads / Vandal Resistant Materials & Design
2 IDENTICAL ISOLATED OMNIDIRECTIONAL ANTENNA ELEMENTS Cover all Sub-6 (FR1) 4G & 5G Wireless Frequency Bands (600-6000 MHz) in a Compact Enclosure
WORKS ON ALL NORTH AMERICAN & Worldwide 4G/LTE & 5G Cellular Networks such as AT&T, T-Mobile, Verizon, US Cellular, Bell Canada, Rogers, Telus, Digicel, Moviestar, Telcel, and others
COMPATIBLE WITH 2X2 MIMO Routers & Modems from Cisco, Cradlepoint, Digi, MoFi, Peplink, Robustel, Telktonika, KuWFi, Yeacomm, InHand, Linovision and others. Some models may require connection adapters.
Customers say
Customers find the antenna easy to install and use. However, some customers disagree on the signal strength and functionality.
AI-generated from the text of customer reviews
Looking for a durable and reliable antenna for your 4G/5G network? Look no further than the Proxicast Vandal Resistant 2×2 MIMO Low Profile Omni-Directional Screw Mount Antenna!
This antenna is designed to withstand even the harshest conditions, making it perfect for outdoor use. With its 10 ft coax leads, you’ll have plenty of flexibility in where you can install it. Plus, it’s compatible with a wide range of devices including Cisco, Cradlepoint, Digi, Pepwave, Sierra Wireless, and more.
Don’t settle for subpar performance when it comes to your network. Upgrade to the Proxicast Vandal Resistant Antenna and experience reliable, high-speed connectivity like never before. Order yours today! #Proxicast #Antenna #4G #5G #HighSpeedConnectivity
#Proxicast #Vandal #Resistant #2×2 #MIMO #Profile #4G5G #OmniDirectional #Screw #Mount #Antenna #Coax #Leads #Cisco #Cradlepoint #Digi #Pepwave #Sierra #Wireless #ANT121M22
