Price: $75.00
(as of Dec 17,2024 14:24:55 UTC – Details)
Product Description
Package include:
1x 1.5KW 220V VFD Inverter Frequency Converter
1x 2m extension cable
Pdf. English user manual (If you have not received the user manual at Amazon Message Center from us,please message us)
Main parameters:
Input Voltage: 220V(+/-15%)
Output Voltage: 220VAC
Input Frequency: 50-60 Hz
Output Frequency: 0-1000 Hz
Input Phase: 1 phase
Output Phase: 3 phase
Current: 7A
SHIFT: Status monitor mode switch, parameter of third stage menu switch.
DIR: Change the running director of motor
ESC: Return to the starus of “ENTER”
UP: Parameter of fuction code, data increase, revise and select all kinds of modes
RUN: Run command
SET: Enter into menu, enter into parameter or parameter date writing confirm
DOWN: Parameter of fuction code, data decrease, revise and select all kinds of modes
STOP: Stop command / abnormal command
SPEED: Speed controller
Advantages:
Two speed control modes: no PG vector control (SVC), V/F control
No PG vector control (SVC): starting torque 0.5Hz up to 150%
8-stage simple PLC function, multi-speed control and PID control
Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting
I/O terminals can be freely programmed to combine multiple working modes according to user needs.
With instantaneous power-down retention function, it can avoid the impact of production due to instantaneous power failure
With over torque and under torque detection
Automatic voltage adjustment function to effectively solve the low frequency oscillation problem of high power motor
Provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal etc
Frequency range: 0-1000Hz
Accuracy: 1) Digital type: 0.01％(-10～40℃); 2) Analog type: 0.1％(25±10℃)
Setting resolution: 1) Digital type: 0.01Hz; 2) Analog type: 1％ of the maximum operating frequency
Output resolution: 0.01Hz
Keyboard setting mode: Set directly
Analog setting mode: External voltage 0-5V, 0-10V, 4-20mA, 0-20mA
Other Ductions: 3 hopping frequencires (lower-frequency limit, start-up frequency and stop frequency) can be set respectively.
Control Mode: V/F Vector Control
Communication Control: RS-485
Vibration: Below 0.5G
Wire:
L / N: Input power terminal, connected to 220V AC singe-phase power
U / V / W: Input output terminal, connected to three-phase motor
DC+ / DC- : DC output + terminal, DC bus output terminal is used for connecting external brake unit or common DC bus system.
DB: Brake output terminal, connecting brake resistor between DB and DC+
PE: Earthing terminal, inverter housing earthing terminal must be earthed.
Application:
Wood milling/carving/engraving machine,advertisement engraving machine,CNC router machine, small sized processing center, winding machine,mixer,extruder,slitter,winder,compressor,ventilator,pump,grinder,conveyor,elevator ,centrifuger and other speed control machines.
Description of jumper fuction
J1: Selection of X1-X6 wiring mode: NPN PNP ( Ex-factory setting: PNP)
J2: Selection of AO output: VO, voltage AO, current ( Ex-factory setting: VO)
J3: Selection of AI2 input: V, voltage A, current ( Ex-factory setting: A)
J4: RS485 communication interface terminator enabled: ON OFF ( Ex-factory setting: OFF)
J5: Selection of X6 terminal fuction reuse: X6 Y1-PEO ( Ex-factory setting: X6)
Input Voltage: 220V(+/-15%)
Output Voltage: 220VAC
Input Frequency: 50Hz-60 Hz
Output Frequency: 0-1000 Hz
Input Phase: 1 phase;Output Phase: 3 phase;Current: 7A
Introducing the CNCTOPBAOS VFD Frequency Inverter 1.5KW 2HP, Single Phase to 3 Phase 220V Variable Frequency Drive Converter, Speed Control VSD 1000Hz with Cable for Spindle Motor, CNC Router Engraving Machine!
Upgrade your CNC router engraving machine with this powerful VFD frequency inverter. With a 1.5KW 2HP output, this converter allows you to easily convert single-phase power to three-phase power, providing smooth and reliable speed control for your spindle motor.
The CNCTOPBAOS VFD Frequency Inverter is capable of reaching speeds of up to 1000Hz, giving you the flexibility to adjust the speed to suit your specific engraving needs. The included cable ensures easy installation and compatibility with your existing setup.
Don’t let outdated equipment hold you back – upgrade to the CNCTOPBAOS VFD Frequency Inverter and take your CNC router engraving machine to the next level!
#CNCTOPBAOS #VFD #Frequency #Inverter #1.5KW #2HPSingle #Phase #Phase #220V #Variable #Frequency #Drive #ConverterSpeed #Control #VSD #1000Hz #Cable #Spindle #MotorCNC #Router #Engraving #Machine
