Price: $7.99
(as of Dec 14,2024 06:59:21 UTC – Details)
Product Description
Compact with:
for 3G N5321 4G Sierra Wireless AirPrime EM7355 EM7455 EM7340 EM7345 GOBI5000for HUAWEI ME906E ME906V ME906J ME906C ME936 MU736 NGFF M2M WWAN Cardfor Intel 7260 7265 3160 3165 8260 8265 17265 18265 9260 9560 ax200 ax201 NGFF M2 Wifi Card Act（ Don’t work on 7265D2W 8260D2W ）for Broadcom BCM943228ZH BCM94352Z NGFF Card Actfor Broadcom BCM94360CSAX, BCM94360CS2, BCM94360CS2AX, BCM94360HMB WIFI WLAN CARDfor 3G LTE (4G) GPRS GSM CDMA built-in PCB antennaAlso for X8R X6R Receiver etc
Note
MHF4 connector is a tough nut to crack, especially for first-time usersIt has to be dead-center and 90 degrees straight down to be pushed in with a tiny bit of force, Easy does itYes, it’s a bit scary (just like first time riding a bicycle)Do not ever think to try using a slightly tilted angle to wiggle it in, That will probably hurt the connector alignment itself
WARNING: Don’t pull the MHF4 connector out once installed, That part is even harder (90 degrees is the golden rule) and can potentially damage the socket on the motherboard
wifi antenna
Specifications:
Frequency Range: DC up to 6GHz (VSWR: 1,3 max at 0,1~3GHz; VSWR: 1,4 max at 3~6GHz) ( option: 1,2Ghz 2,4Ghz 3Ghz 6Ghz 8Ghz 12Ghz 18G)
Contact Resistance: 20m ohm max (Signal) and 10m ohm max(Ground)
Withstand Voltage: AC 200V
Insulation Resistance: 500M ohm Min/DC 100V density, and ultra small size connector for Note Book PC, Smart Mobile phone, GPS module cable, GSM module cablem WLAN 2,4GHz module cable, WLAN 5,8Ghz module cable, Digital apploance……
IPEX MHF4 RF Microwave Coaxial Antenna
Note! Don’t work on MINI PCIE module slot (please look the Picture)
Features:
Support: 4G / 3G / 2,4G / 5G
Compatible with: IPEX MHF4 Antenna Slot
SMT type coaxial receptacle and Mating plug cable connector
Small form factor and low profile 1,2mm Max Mating Height
Applicable cable: 0,81mm RF coaxial cable
High productivity: Easy cable termination by “i-Fit” without soldering
Application Technology: IEEE802,11 ax/ac/a/b/g/n, WiMax, Zigbee, Bluetooth Wireless
Length: one：42cm（16,53inches） another：47cm（18,50inches)
Connect
Caring for your U,FL/MHF4 connector is all about keeping that shiny electrical contact
pristine and contacting! Grime, oxidation, and mountain dew will increase the impedance
to/from the antenna and will reduce range, Bent contacts won’t let any of the electric
pixies through at all and those “it works if I hold it just right” problems are definitely the
worst to debug!
1, Inspect the antenna receptacles on the module; don’t use if deformed or damaged,
2, If possible, acquire or 3D print an installation tool, If using a tool; follow the instructions found with the tool,
3, For manual installation, align the connectors so they are perpendicular,Attempting to
engage connectors at an angle damages both connectors
4, Press the antenna wire connector straight down onto the module receptacle, You should hear an audible click and mechanical snap when a proper connection is made
When connecting the parts of the U,FL/MHF4, first make sure your finger is relatively clean, To avoid putting pressure on the connection, pinch the cable one or two cm from the end and try to align it so that the female connector rests evenly across the surface of the male connector, You can then lightly put your finger on top of the stacked connectors
if it feels like your elementary school’s old see-saw then try again, you want this to be stable, Also be sure that the two connectors are centered on one another left-to-right and up-to-down when you look at the connector from above the board
If everything is good to go, use the very center of your finger to press firmly down – you’ll feel a satisfying “lock sensation” as the datasheet puts it! (P,S I had to move my finger off to the side so that you could see the connector in there, but you should really make an effort to push down right in the center of the connector)
Note
MHF4 connector is a tough nut to crack, especially for first-time users, It has to be dead center and 90 degrees straight down to be pushed in with a tiny bit of force, Easy does it,
Yes, it’s a bit scary (just like first time riding a bicycle,)
Do not ever think to try using a slightly tilted angle to wiggle it in, That will probably hurt the connector alignment itself
WARNING, Don’t pull the MHF4 connector out once installed, That part is even harder (90 degrees is the golden rule) and can potentially damage the socket on the motherboard
For 3G N5321 4G Sierra Wireless AirPrime EM7355 EM7455 EM7340 EM7345 GOBI5000 for HUAWEI ME906E ME906V ME906J ME906C ME936 MU736 NGFF M2M WWA N Card for Intel 7260 7265 3160 3165 8260 8265 17265 18265 9260 9560 ax200 ax201 NGFF M.2 Wifi Card Act（ Don’t work on 7265D2W 8260D2W ） for Broadcom BCM943228ZH BCM94352Z NGFF Card Act for Broadcom BCM94360CSAX BCM94360CS2 BCM94360CS2AX BCM94360HMB WIFI WLAN CARD for 3G LTE (antenna) GPRS GSM CDMA built-in laptop antenna cable wifi wire antena replacement
Support: 4G / 3G / 2.4G / 5G Compatible with: IPEX MHF4 Antenna Slot SMT type coaxial receptacle and Mating plug cable connector Small form factor and low profile 1.2mm Max. Mating Height Applicable cable: 0.81mm RF coaxial cable Application Technology: IEEE802.11 ax/ac/a/b/g/n, WiMax, Zigbee, Wireless Length: one：42cm（16.53inches） another：47cm（18.50inches）.ngff cable ipex mhf antenna wire wifi internal pigtail antenna
Ultra small size connector for Note Book PC, computer GPS module cable, GSM module cablem WLAN 2.4GHz module cable, WLAN 5.8Ghz module cable, Digital apploance, Dual band ghz mini antennas for long wwan wifi booster gaming omnidirectional wifi antenna
NOTE: Only Use for M.2 (NGFF) Interface, Do Not Use for MINI pcie Interface (please look the Picture), 2.4/5G Dual Frequency Internal High Gain WiFi Antenna mhf4 Jack pigtail cable extension directional extender cable antenna replacement kit for wireless module & wifi cards
Frequency Range: DC up to 6GHz (VSWR: 1.3 max. at 0.1~3GHz; VSWR: 1.4 max. at 3~6GHz) ( option: 1.2Ghz 2.4Ghz 3Ghz 6Ghz 8Ghz 12Ghz 18G… ) Rated Voltage: AC 60v Contact Resistance: 20m ohm max.(Signal) and 10m ohm max.(Ground) Withstand Voltage: AC 200V Insulation Resistance: 500M ohm Min./DC 100V density
Also work for intel 9260ngw ax200ngw 7260hmw and the Jetson Nano Module M.2 wifi card with MHF4 connector.killer ax1650 broadcom asus wifi modem internal cards alfa eplacement antenna cables for remoto control wifi hotspot wifi security camera antenna with mhf4 connectors
Cable lenth: One of the cables is 45cm and another one is 47cm, the one for 47cm is the MAIN and the（AUX）Auxiliary antenna is 45cm
Customers say
Customers find the network interface controller adapter works well and is easy to install. They appreciate its affordability, with speeds of up to 500 Mbps reported. However, some customers have issues with the adhesive quality and fit. There are mixed opinions on signal strength.
AI-generated from the text of customer reviews
Are you looking to upgrade your PC’s WiFi capabilities? Look no further than the MHF4 IPEX 2.4Ghz 5Ghz 5.8G WLAN Network Adapter! This powerful antenna is compatible with a range of Intel WiFi cards, including the 7260, 8260, 8265, 9265, 9260, 9560, AX200, and AX Killer M.2 IPEX4 Wi-Fi Wireless WLAN Card.
Not only is this adapter compatible with a variety of Intel WiFi cards, but it also works seamlessly with devices like the Banana Pi 4 and M2 Zero Hachintosh. With dual-band support for 2.4Ghz, 5Ghz, and 5.8Ghz frequencies, you can enjoy faster and more reliable WiFi connections for all your online activities.
Upgrade your PC’s WiFi performance today with the MHF4 IPEX 2.4Ghz 5Ghz 5.8G WLAN Network Adapter – your ticket to faster, more reliable WiFi connections!
#MHF4 #IPEX #2.4Ghz #5Ghz #5.8G #WLAN #Network #Adapter #WiFi #Antenna #Intel #AX200 #Killer #M.2 #IPEX4 #WiFi #Wireless #WLAN #Card #Banana #Hachintosh
