Stay Ahead of the Curve: Latest Insights & Trending Topics

Tag: 630V

  • 2 Pcs DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LED Display/5V Micro USB, Smart Home Controller


    Price: $8.98
    (as of Jan 30,2025 06:05:17 UTC – Details)



    Podazz Multi-function Relay Control Module is designed for users with different timing and control needs. It is ideally suited for a wide range of applications from hobby to industrial control.
    Specification
    Operating Voltage: DC 6V – 30V, supports micro USB 5V power supply.
    Operating current: 50mA, quiescent current: 20mA
    Operating temperature: -20 to 60
    No Maximum Load: Size: 6.4*3.8*1.7 cm

    Operation mode:
    P1: After the signal is triggered (input voltage), the relay stays on for the OP time and then disconnects. Operation during the OP time is as follows.
    1. The retriggered signal is ignored.
    2. the retriggered signal is retimed
    3. The retriggered signal is reset, the relay contact is broken and the timing is stopped.
    4. (Random mode): The relay only performs OP timing once when the power is turned on.

    P2: Trigger signal is fed, relay stays open for CL time, then OP time is executed. When the timing is finished, the relay turns off.
    1. (Random mode): Trigger signal is fed, the relay stays open for the CL time and then conducts OP time. When the signal is triggered again, the relay stays open for the CL time and then turns on the OP time again.

    P3: Trigger signal is fed, the relay conducts OP time, the relay stays disconnected for CL time, then the above action is repeated, and when the signal is triggered again within the timing cycle, the relay contact is disconnected to stop the timing. Loop time (LOP) can be set.
    1. No need to trigger the signal when turning on the power, the relay conducts OP time, then the relay stays disconnected CL time, then repeat the above action.

    P4: Remaining signal function: Timing reset after signal triggering, relay contact stays on, when there is no signal, the relay closes after timing OP. When the signal is triggered again during the timing period, the timing will be reset.

    Timing range: 0.1 sec (min) ~ 999 min (max) continuously adjustable.
    How to select timing range:
    After setting the parameter value in the mode selection interface, press STOP button briefly to select the timing range.
    XXX. Decimal point in single digit, timing range = 1 sec ~ 999 sec.
    XX.X Decimal point in 10th digit, timing range = 0.1 sec ~ 99.9 sec.
    X.X.X. with all decimal places, range = 1 minute ~ 999 minutes.
    For example, if you want to set OP to 3.2 seconds, move the decimal point to the tenth position and the digital tube will display 03.2.

    Parameter Description: OP = On Time, CL = Off Time, LOP = Number of Cycles (1 – 999, “—” means infinite)
    These parameters are independent of each other, but are shared across all modes of operation. For example, if the OP (on time) is set to 5 seconds in P1.1, and the user needs P1.2 mode, enter P1.2 to set the corresponding parameter, and the OP will also be 5 seconds.
    In the main interface (the digital tube displays 000), press the SET button briefly, the OP (CL, LOP) and the corresponding time XXX will be displayed.
    If there is only OP (e.g. mode P1.1, P1.2, P1.3) time in the mode, press the SET button briefly to display only OP and the corresponding time.
    If there are OP, CL and LOP in the mode (e.g. mode P3.1, P3.2), a short press of the SET button will display OP and the corresponding time, CL and the corresponding time, LOP and the corresponding time.

    After setting the operation mode, press the SET button on the main interface to easily view and change the parameters.

    How to Set Parameters
    1. First, determine the operating mode of the relay. 2.
    2. After determining the operating mode of the relay, in the main interface (when the module is powered up, it will flash the current operating mode – default is P1 mode, then enter the main interface)
    Long press the SET button for 2 seconds and then release it to enter the mode selection interface, select and set the mode (P1 ~ P-4) by short press the UP and DOWN buttons.
    3. Select the desired setting mode (e.g. P3-1) and press the SET button briefly to set the parameters. At this time, the parameter you set will blink (OP – ON time, CL – OFF time, LOP – number of cycles). You can adjust the parameters by pressing the UP and DOWN buttons. Long press (fast increase or decrease) and short press (increase or decrease by 1 unit) are supported. After the parameter setting is completed, short press “STOP” button to select the unit point position and choose the timing range (corresponding to the time 0.1 seconds ~ 999 minutes). Short press “SET” (set) key to set the next parameter of the current mode, the progress is as described above.
    4. After selecting the mode parameter, press and hold the “SET” button for 2 seconds and release. The current setting mode will blink and return to the main interface, parameter setting is complete. Very simple!

    Main interface:
    Off” state displays “000” without decimal point; “On” state displays clear decimal point.
    Mode selection interface:
    Long press “SET” key to set parameters, long press “SET” key to return to the main interface. Very simple!
    Relay Enable Mode:
    ON: Relay is allowed to conduct during OP time (on time).
    OFF: The relay is forbidden to conduct and is always off.
    Short press the “STOP” button on the main interface to switch between “ON” and “OFF”. It will blink and return to the main interface at this time. (This function is an emergency stop function, which can turn on or off the relay with one button)

    Sleep Mode:
    C-P Sleep mode: When the relay is not used for 5 minutes, the digital tube will automatically turn off the display and the program will continue to work.
    O-d Normal Mode: The digital tube display is always on. Press and hold the “STOP” button for 2 seconds and release it to toggle between C-P and O-d states. It will blink and return to the main interface.
    After power failure, the sleep mode will automatically switch to normal mode.

    Package Includes:
    2 x DC 6-30V Timer Relay Module with LED display, paper manual not included)

    Caution:
    Before using, please check whether the relay enable mode is set to “ON” to ensure the full function of the relay. On the main interface, short press the “STOP” button to toggle between “ON” and “OFF”.
    If the timing relay board is not energized, or if the timing relay board is energized but the loads in the circuit do not trigger the start, try applying more power than expected. This is especially true when used with trigger signals and loads on the wiring diagram that share a common power source, as they require additional power to start.
    Press and hold the “DOWN” key to toggle between F1 and F2 modes. f1 is the default mode: relay operates in forward direction and f2 is the opposite mode: relay operates in reverse direction. Some batches do not include this feature as F2 mode is rarely used.
    Package Dimensions ‏ : ‎ 3.66 x 3.58 x 1.65 inches; 2.4 ounces
    Item model number ‏ : ‎ DC 6-30V
    Date First Available ‏ : ‎ June 28, 2024
    Manufacturer ‏ : ‎ Podazz
    ASIN ‏ : ‎ B0D89Y7KHZ
    Country of Origin ‏ : ‎ China

    Multi-functional Timing Relay: Programmable delay mode control relay timing, widely used in smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment and so on.
    Operating voltage: DC 6V – 30V, supports micro USB 5V power supply. High Level Trigger: 3V – 24V, NO (Normally Open) Maximum Load < AC 250V/10A, < DC 30V/10A, Timing Range 0.1 sec ~ 999 min (Continuously Adjustable).
    Hibernation Mode: If there is no operation for 5 minutes, the digital tube of the relay board will turn off automatically. Press any button to wake it up.
    Parameter description: OP (on time) / CL (off time) / LOP (loop time) can be set individually, the parameters are independent of each other. All parameters are permanently stored once set. Functions and parameters can be viewed or changed later.
    Reverse Protection: Built-in diode to provide accidental polarity reversal protection for the circuit.


    Introducing the 2 Pcs DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LED Display/5V Micro USB – the ultimate smart home controller for all your timing needs!

    This programmable timer relay module is designed to make your life easier by allowing you to set specific on/off times for your devices. With a wide voltage range of 6-30V, this module is versatile and can be used with a variety of electronic devices.

    The LED display makes it easy to program and monitor the timing settings, while the 5V Micro USB port allows for convenient power input. Whether you’re looking to automate your lighting, irrigation system, or any other electrical appliance, this timer relay module is the perfect solution.

    Say goodbye to manual timers and hello to the convenience of a programmable cycle timer. Upgrade your home automation system with the 2 Pcs DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer today!
    #Pcs #630V #Timer #Relay #Programmable #Delay #Relay #Module #Cycle #Timer #LED #Display5V #Micro #USB #Smart #Home #Controller,5 programmable buttons

  • 5pcs 5V Type-C Timer Relay DC 6-30V Programmable Cycle Delay Timer Switch Module with Digital LED Display


    Price: $15.99
    (as of Jan 29,2025 03:27:18 UTC – Details)



    Product parameters:
    Voltage: 6V~30V(support Type-C USB 5.0V)
    Output Capacity: can control no more than DC 30V 5A AC or 220V 5A
    Quiescent Current: 20mA
    Operating Current: 50mA
    Operating Temperature: -40℃~85℃
    Timing Range: 0.1seconds to 999 minutes(continuously adjustable)
    Trigger Signal Source: High voltage level trigger(3.0V~24V), signal ground and system ground are not connected to improve system anti-interference ability(or you can connect them).
    Optocoupler Isolation: improve the anti-interference ability, after the parameter setting, it will memory forever . Warning: Relay contact is passive and electricity production; 1 channel has the control function on / off.
    Operation Mode:
    P1: After triggering signal, switch is connected for “OP” time, then disconnected; within the “OP” time:
    P1.1: if trigger signal again, it is invalid.
    P1.2: if trigger signal again, restart timing.
    P1.3: if trigger signal again, switch is disconnected, stop timing.
    P-2: After triggering signal, switch is disconnected for “CL” time, then switch is connected for “OP” time, and disconnect after timing.
    P3.1: After triggering signal, switch is connected for “OP” time, then switch is disconnected for “CL” time, and enter loop. If trigger signal during loop, switch is disconnected and stop timing. The loop times (LOP) can be set.
    P3.2: After power on, no need trigger signal, switch will be connected for “OP” time, then disconnected for “CL” time, and enter loop. The loop times (LOP) can be set
    P-4: Signal holding function. If there is trigger signal, timing will be reset, switch remains connected; when the signal disappears, it will disconnect after “OP” time. During timing, if there is a signal, timing will be reset.
    OP: Connect time. CL: Disconnect time. LOP: Loop times(1~999, “—” indicates infinite times).
    C-L Sleep mode: within 5 minutes, no operation; ni
    Product Dimensions ‏ : ‎ 0.1 x 0.1 x 0.1 inches; 0.16 ounces
    Date First Available ‏ : ‎ May 25, 2021
    Manufacturer ‏ : ‎ ACEIRMC
    ASIN ‏ : ‎ B0DHNXMCRL
    Country of Origin ‏ : ‎ China

    Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc.
    Operating voltage: DC 6V – 30V, support micro USB 5V power supply. High level trigger: 3V – 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable).
    Built-in a diode to provide protection against accidental reverse polarity for the circuits.
    If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up.
    OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time.


    Are you looking for a reliable and programmable timer relay for your electronic projects? Look no further than the 5pcs 5V Type-C Timer Relay DC 6-30V Programmable Cycle Delay Timer Switch Module with Digital LED Display!

    This versatile timer relay module is perfect for controlling the timing of your devices, lights, motors, and more. With a wide input voltage range of 6-30V, this module can be used in a variety of applications. The Type-C USB port allows for easy programming and configuration, while the digital LED display provides real-time feedback on the timer settings.

    Whether you need to set up cyclic timing, delay timing, or pulse timing, this timer relay module has you covered. It’s easy to install and operate, making it ideal for DIY enthusiasts, hobbyists, and professionals alike.

    Don’t wait any longer to upgrade your electronic projects with the 5pcs 5V Type-C Timer Relay DC 6-30V Programmable Cycle Delay Timer Switch Module. Order yours today and take your projects to the next level!
    #5pcs #TypeC #Timer #Relay #630V #Programmable #Cycle #Delay #Timer #Switch #Module #Digital #LED #Display,5 programmable buttons

  • 2pcs 5V Micro USB Timer Relay DC 6-30V Programmable Cycle Delay Timer Switch Module with Digital LED Display


    Price: $9.99
    (as of Jan 26,2025 11:17:28 UTC – Details)



    FORIOT, a fusion of "For" and "IoT," encapsulates our commitment to creating products that are expressly designed for the interconnected future.
    Package Dimensions ‏ : ‎ 4.61 x 3.46 x 1.06 inches; 1.76 ounces
    Date First Available ‏ : ‎ June 17, 2023
    Manufacturer ‏ : ‎ FORIOT
    ASIN ‏ : ‎ B0C8CM6GQF

    【Product Parameters】Operating voltage: DC 6V-30V, support micro USB 5V power supply; trigger source: high level (3V-24V), with optocoupler isolation; output power: 30V/5A DC,220V/5A AC; quiescent current: 20mA; operating current: 50mA; operating temperature: -40℃-85℃(-40℉-185℉).
    【Timing Range】The time delay relay supports 0.1 seconds (min) – 999 minutes (max) continuously adjustable. The timing range is selected by short pressing the STOP button after setting the parameter values in the mode selection interface.
    【Enable Mode】 ON: the delay relay is allowed to be on during the OP conduction time; OFF: the delay relay is forbidden to be on and is off; short press the STOP button in the main interface to switch between ON and OFF, the current state will flash and then return to the main interface.
    【Sleep Mode】 When the digital LED cycling relay is enabled,digital tube of the relay board will automatically turn off if there is no operation for 5 minutes. It can be woken up by pressing any of the buttons.
    【Application Scenario】DC 6-30V programmable delay relay is widely used in electronic security systems, industrial automation equipment, intelligent irrigation systems and home automation systems, etc.


    Are you looking for a reliable and easy-to-use timer relay switch module for your electronic projects? Look no further than the 2pcs 5V Micro USB Timer Relay DC 6-30V Programmable Cycle Delay Timer Switch Module with Digital LED Display!

    This versatile timer relay switch module is perfect for controlling the timing of various electronic devices such as lights, motors, pumps, and more. With its programmable cycle delay feature, you can easily set the on and off times according to your specific needs.

    The digital LED display makes it easy to monitor the current status of the timer relay switch module, ensuring precise timing control at all times. Plus, the micro USB interface allows for convenient power supply options, making it ideal for a wide range of applications.

    Don’t settle for unreliable timer relay switch modules – invest in the 2pcs 5V Micro USB Timer Relay DC 6-30V Programmable Cycle Delay Timer Switch Module with Digital LED Display today and take your electronic projects to the next level!
    #2pcs #Micro #USB #Timer #Relay #630V #Programmable #Cycle #Delay #Timer #Switch #Module #Digital #LED #Display,5 programmable buttons