Tag: Amplifier

  • 6V6GT Tube Replaces 6V6 CV511 6P6P HiFi Audio Tube Amplifier kit DIY Supporting Four-Way(2pcs Matched Pair)

    6V6GT Tube Replaces 6V6 CV511 6P6P HiFi Audio Tube Amplifier kit DIY Supporting Four-Way(2pcs Matched Pair)


    Price: $114.14
    (as of Dec 31,2024 14:42:03 UTC – Details)



    Preamplifiers
    6V6GT: Power collector tube. Oxide coated side heated cathode.
    Er: 6.3V
    Current: 0.45A
    Interelectrode capacitance:
    Gate to screen: G1-P 0.7pF
    Input: G1-(H+K+G2+G3) 9.0pF
    Output: P-(H+K+G2+G3)7.5pF T-9
    Maximum Ratings
    Screen voltage: 350V
    Curtain grid voltage: 315V
    Screen power dissipation: 14W
    Curtain grille power dissipation: 2.2W
    Voltage between hot wire and cathode: ±200V
    Gate circuit resistance: 0.1M (fixed bias), 0.5M (self-fed bias)
    Typical operating characteristics
    A1-class amplification
    Screen voltage: 315V 180V 250V
    Curtain grid voltage: 315V 180V 250V
    Gate voltage: -8.5V-12.5V-13V
    Peak input voltage: 8.5V 12.5V 13V
    Zero signal screen current: 29mA 45mA 39mA
    Maximum signal screen current: 30mA 47mA 35mA
    Zero signal curtain current: 3mA 4.5mA 2.2mA
    Maximum signal gate current: 4.0mA 7.0mA 6.0mA
    Internal resistance of the board (approximately): 50000 50000 80000
    Mutual conductivity: 3700A/V 4100A/V 3750A/V
    Load impedance: 5500 5000 8500
    Total harmonic distortion: 8%, 8%, 12%
    Maximum signal output power: 2.0W 4.5W 5.5W
    AB; push-pull amplifier (two tube values)
    Screen voltage: 250V 285V
    Curtain grid voltage: 250V 285V
    Gate voltage: -1.5V-19V
    Peak input voltage (): 30V 38V
    Zero signal screen current: 70mA 70mA
    Maximum signal screen current: 79mA 92mA
    Zero signal curtain current: 5.0mA 4.0mA
    Maximum signal gate current: 13.0mA 13.5mA
    Load impedance (PP): 10000 80000
    Total harmonic distortion: 5% 3.5%
    Maximum signal output power: 10W 14W
    Three-pole connection method
    Screen voltage: 250V
    Gate voltage: -12.5V
    Magnification: 9.8
    Internal resistance of board: 1960
    Mutual conductivity: 5000A/V
    Screen current: 49.5mA
    Gate voltage: (Ip=0.5mA) -36V

    Preamplifiers


    Are you looking to upgrade your current audio amplifier kit? Look no further than the 6V6GT Tube, which can replace the 6V6 CV511 and 6P6P tubes in your HiFi audio amplifier.

    This matched pair of 6V6GT tubes are perfect for DIY enthusiasts who want to take their audio experience to the next level. With four-way support, you can expect improved sound quality and performance from your amplifier.

    Don’t wait any longer to enhance your audio setup with these high-quality tubes. Order your 6V6GT Tube set today and start enjoying a superior listening experience.
    #6V6GT #Tube #Replaces #6V6 #CV511 #6P6P #HiFi #Audio #Tube #Amplifier #kit #DIY #Supporting #FourWay2pcs #Matched #Pair,y6f6d

  • 6V6 Tube 6V6GT Replaces CV511 6P6P HiFi Audio Tube Amplifier kit DIY Precision Matching Four-Way(1Pair Matched)

    6V6 Tube 6V6GT Replaces CV511 6P6P HiFi Audio Tube Amplifier kit DIY Precision Matching Four-Way(1Pair Matched)


    Price: $130.20
    (as of Dec 31,2024 13:44:37 UTC – Details)



    Preamplifiers
    6V6GT: Power collector tube. Oxide coated side heated cathode.
    Er: 6.3V
    Current: 0.45A
    Interelectrode capacitance:
    Gate to screen: G1-P 0.7pF
    Input: G1-(H+K+G2+G3) 9.0pF
    Output: P-(H+K+G2+G3)7.5pF T-9
    Maximum Ratings
    Screen voltage: 350V
    Curtain grid voltage: 315V
    Screen power dissipation: 14W
    Curtain grille power dissipation: 2.2W
    Voltage between hot wire and cathode: ±200V
    Gate circuit resistance: 0.1M (fixed bias), 0.5M (self-fed bias)
    Typical operating characteristics
    A1-class amplification
    Screen voltage: 315V 180V 250V
    Curtain grid voltage: 315V 180V 250V
    Gate voltage: -8.5V-12.5V-13V
    Peak input voltage: 8.5V 12.5V 13V
    Zero signal screen current: 29mA 45mA 39mA
    Maximum signal screen current: 30mA 47mA 35mA
    Zero signal curtain current: 3mA 4.5mA 2.2mA
    Maximum signal gate current: 4.0mA 7.0mA 6.0mA
    Internal resistance of the board (approximately): 50000 50000 80000
    Mutual conductivity: 3700A/V 4100A/V 3750A/V
    Load impedance: 5500 5000 8500
    Total harmonic distortion: 8%, 8%, 12%
    Maximum signal output power: 2.0W 4.5W 5.5W
    AB; push-pull amplifier (two tube values)
    Screen voltage: 250V 285V
    Curtain grid voltage: 250V 285V
    Gate voltage: -1.5V-19V
    Peak input voltage (): 30V 38V
    Zero signal screen current: 70mA 70mA
    Maximum signal screen current: 79mA 92mA
    Zero signal curtain current: 5.0mA 4.0mA
    Maximum signal gate current: 13.0mA 13.5mA
    Load impedance (PP): 10000 80000
    Total harmonic distortion: 5% 3.5%
    Maximum signal output power: 10W 14W
    Three-pole connection method
    Screen voltage: 250V
    Gate voltage: -12.5V
    Magnification: 9.8
    Internal resistance of board: 1960
    Mutual conductivity: 5000A/V
    Screen current: 49.5mA
    Gate voltage: (Ip=0.5mA) -36V

    Preamplifiers


    Are you looking to upgrade your HiFi audio tube amplifier kit? Look no further than the 6V6 Tube 6V6GT, which replaces the CV511 6P6P tube. This precision-matched four-way set is perfect for DIY enthusiasts who want to take their audio experience to the next level.

    With 1 pair of matched tubes, you can ensure that your amplifier is performing at its best. The 6V6 Tube 6V6GT delivers high-quality sound with excellent clarity and precision, making it ideal for audiophiles who demand the best from their equipment.

    Upgrade your audio system today with the 6V6 Tube 6V6GT and experience the difference in sound quality. Don’t settle for anything less than perfection when it comes to your audio setup. Order your precision-matched set now and take your listening experience to new heights.
    #6V6 #Tube #6V6GT #Replaces #CV511 #6P6P #HiFi #Audio #Tube #Amplifier #kit #DIY #Precision #Matching #FourWay1Pair #Matched,y6f6d

  • Dasaita 8GB+256GB Stereo for Toyota 4Runner 2010-2023 Replacement, Android 13, Wireless CarPlay & Android Auto, Built-in 4G Cellular, Optical Amplifier, 9 Inch QLED Screen

    Dasaita 8GB+256GB Stereo for Toyota 4Runner 2010-2023 Replacement, Android 13, Wireless CarPlay & Android Auto, Built-in 4G Cellular, Optical Amplifier, 9 Inch QLED Screen


    Price: $646.96
    (as of Dec 30,2024 19:32:52 UTC – Details)




    【Perfect Fit for Toyota 4Runner】Upgrade your 5th Gen Toyota 4Runner from 2010 to 2023 with ease using the Dasaita car radio. Come with a plug-and-play radio kit, you can retain all the factory functions, including the steering wheel controls, reverse camera, 360 camera (2020-2023 model year NOT support), JBL amplifier, and factory USB/AUX port. (If you need an installation video to assist with the installation, please contact us via “Get Product Support”)
    【REAL Android 13 Car Stereo】 Upgrade your driving experience with featuring the latest Android 13 OS! Equipped with ARM Cortex Octa-Core Qualcomm 665 CPU processor and 11nm processing technology, enjoy higher efficiency and unparalleled performance. With 8GB RAM and 256GB ROM, experience faster running speeds and more stable performance every time you hit the road.
    【Latest Bluetooth & Lossless Sound】 Enjoy faster and more stable connections with featuring the Qualcomm 3031 BT chip and Bluetooth 5.0. Experience clarity and high-quality stereo sound for your music and calls. Plus, with built-in Optical Output, you can enjoy lossless sound quality for a live audio experience. Connect with an external amplifier with Optical Fiber Digital Input for a next-level listening experience that immerses you in every note.
    【High-Speed Internet Anytime, Anywhere】With a built-in 4G LTE module, provides reliable internet access without the need for a WiFi hotspot. Plus, users can easily connect to their phone’s hotspot via WiFi for even more flexibility and convenience. Stay connected and productive on the go.
    【QLED Display & Day Night】1280 x 720 high-definition,experience a brilliant picture. You can easily switch between vibrant daytime visuals and soothing nighttime displays. The daytime mode is designed to provide clear and crisp imagery, even under direct sunlight. In contrast, the night mode is order to reduce screen glare and prevent eyestrain In the darkness of the environment.
    【Apple CarPlay & Android Auto】 Stay connected while keeping your eyes on the road with this Android radio featuring wireless Apple CarPlay and Android Auto. Issue voice commands, make calls, send messages, use GPS navigation, and access your favorite tunes with Siri or Google Assistant all hassle-free, hands-free. Compatible with numerous phone models, enjoy seamless smartphone integration on your car stereo.


    Are you looking to upgrade the stereo system in your Toyota 4Runner 2010-2023? Look no further than the Dasaita 8GB+256GB Stereo! This top-of-the-line replacement unit features Android 13, Wireless CarPlay & Android Auto, Built-in 4G Cellular, an Optical Amplifier, and a stunning 9 Inch QLED Screen.

    With an impressive 8GB of RAM and 256GB of storage, you’ll have plenty of space to store all your favorite music, apps, and more. The Wireless CarPlay and Android Auto compatibility allows you to seamlessly connect your smartphone to the stereo for hands-free operation while driving.

    The built-in 4G cellular connectivity ensures that you’ll always be connected to the internet, no matter where your adventures take you. And with the Optical Amplifier, you can enjoy crystal clear sound quality that will enhance your driving experience.

    Upgrade your Toyota 4Runner’s stereo system with the Dasaita 8GB+256GB Stereo and take your driving experience to the next level!
    #Dasaita #8GB256GB #Stereo #Toyota #4Runner #Replacement #Android #Wireless #CarPlay #Android #Auto #Builtin #Cellular #Optical #Amplifier #Inch #QLED #Screen,dasaita g13

  • Dasaita 10″ Android 13 Car Stereo for 2015-2022 Toyota Tacoma Radio Upgrade with Wireless CarPlay & Android Auto, 6GB+64GB, Built-in 4G Cellular, Optical Amplifier, HDMI Output

    Dasaita 10″ Android 13 Car Stereo for 2015-2022 Toyota Tacoma Radio Upgrade with Wireless CarPlay & Android Auto, 6GB+64GB, Built-in 4G Cellular, Optical Amplifier, HDMI Output


    Price: $516.96
    (as of Dec 30,2024 07:53:47 UTC – Details)




    【Vehicle Compatibility】 Upgrade your car audio system with this radio, which is specifically designed for Toyota Tacoma 2015-2022. This plug-and-play radio kit retains most of your vehicle’s original functions, including the amplifier, steering wheel controls, reverse camera, and door open hint. Enjoy unparalleled sound quality and a sleek, modern design with this must-have upgrade for your car.
    【REAL Android 13 Car Stereo】 Upgrade your driving experience with Dasaita radio featuring the latest Android 13 OS! Equipped with ARM Cortex Octa-Core Qualcomm 665 CPU processor and 11nm processing technology, enjoy higher efficiency and unparalleled performance. With 6GB RAM and 64GB ROM, experience faster running speeds and more stable performance every time you hit the road.
    【Latest Bluetooth & Lossless Sound】 Enjoy faster and more stable connections with this head unit featuring the Qualcomm 3031 BT chip and Bluetooth 5.0. Experience clarity and high-quality stereo sound for your music and calls. Plus, with built-in Optical Output, you can enjoy lossless sound quality for a live audio experience. Connect with an external amplifier with Optical Fiber Digital Input for a next-level listening experience that immerses you in every note.
    【High-Speed Internet Anytime, Anywhere】With a built-in 4G LTE module and support for most carriers in the US, and provides reliable internet access without the need for a WiFi hotspot. Plus, users can easily connect to their phone’s hotspot via WiFi for even more flexibility and convenience. Stay connected and productive on the go with Dasaita.
    【QLED Touchscreen】1280 x 720 high definition QLED display, with the optically bonded panel technology provides an excellent display effect even under strong light or direct sunlight. It eliminates the gap in the screen, and greatly weakens the mirror reflection light, which makes the screen clearer and more transparent.
    【Apple CarPlay & Android Auto】 Stay connected while keeping your eyes on the road with this Android radio featuring wireless Apple CarPlay and Android Auto. Issue voice commands, make calls, send messages, use GPS navigation, and access your favorite tunes with Siri or Google Assistant all hassle-free, hands-free. Compatible with numerous phone models, enjoy seamless smartphone integration on your car stereo.

    Customers say

    Customers appreciate the product’s attractive appearance, straightforward installation, and functional features like wireless Android Auto, steering wheel controls, and sound quality. They find it easy to use, with good connectivity and a reliable performance.

    AI-generated from the text of customer reviews


    Are you looking to upgrade the radio in your 2015-2022 Toyota Tacoma? Look no further than the Dasaita 10″ Android 13 Car Stereo! This innovative stereo system comes packed with features that will take your driving experience to the next level.

    With wireless CarPlay and Android Auto, you can seamlessly connect your smartphone to the stereo for hands-free calling, messaging, music streaming, and navigation. The 6GB+64GB storage capacity ensures that you have plenty of space for all your favorite apps and media.

    One of the standout features of the Dasaita 10″ Android 13 Car Stereo is the built-in 4G cellular connection, allowing you to stay connected no matter where you are. Whether you need to access real-time traffic updates or stream music on the go, this stereo has you covered.

    The optical amplifier delivers crystal-clear sound quality, while the HDMI output allows you to connect external devices for even more entertainment options. Upgrade your Toyota Tacoma with the Dasaita 10″ Android 13 Car Stereo and enjoy a truly immersive driving experience.
    #Dasaita #Android #Car #Stereo #Toyota #Tacoma #Radio #Upgrade #Wireless #CarPlay #Android #Auto #6GB64GB #Builtin #Cellular #Optical #Amplifier #HDMI #Output,dasaita g13

  • USB Audio Interface for Recording Music, XLR interface with 48V Phantom Power, TRS balanced with Headphone Amplifier, AudioBox Mic Preamps 48v 2 Channel for PC/Win/Mac Streaming and Podcasting

    USB Audio Interface for Recording Music, XLR interface with 48V Phantom Power, TRS balanced with Headphone Amplifier, AudioBox Mic Preamps 48v 2 Channel for PC/Win/Mac Streaming and Podcasting


    Price: $67.99
    (as of Dec 29,2024 22:42:24 UTC – Details)


    Product Description

    USB Audio Interface

    USB Audio Interface

    NOTE:

    1-The microphone input port uses a standard 3-pin XLR socket, which is compatible with most types of microphones.
    2-If the microphone and the instrument input are used at the same time, the two inputs will be added in mono.

    speakers : TRS ¼” (6.35mm) line level outputs located on the rear of the unit.
    headphones : impedance between 30-600 ohms.
    Compatible Operating Systems
    Windows 7-10 、Mac OS High Sierra
    Technical Specifications:
    Combination XLR/¼” Input :Microphone Audio Sources
    LINE ¼” Connectors:Instruments or Line Level Audio Sources
    Connect to your PC via USB2.0 Type-C connector.
    OUTPUTS
    LINE OUTPUTS LEFT and RIGHT – 2 x ¼” (6.35 mm)

    USB AUDIO INTERFACE

    USB AUDIO INTERFACE

    USB audio interface

    USB audio interface

    Package

    1 x USB Audio interface,
    1 x PC connection line.
    1 x Manual

    MYPIN USB Audio Interface
    Designed for the home recording studio

    2×2 USB audio interface for recording microphones and instruments
    Audiophile 48 kHz resolution for professional audio quality

    usb audio interface

    usb audio interface

    Recording & Podcasting & Live Streaming

    Getting studio-quality recordings at home has never been easier. AR005 Solo provides singer-songwriters with a reassuringly easy recording process.
    Ultra-low Latency Monitoring for Fuss-free Recording -Experience nearly zero-latency monitoring of any input signal with a USB/Direct switch that adjusts the balance between the direct inputs and the playback from your computer.
    Setup Simplicity, Capture Anywhere-with its USB-powered specification is ideal for recording on the go.

    usb audio interface

    usb audio interface

    Perfect Recording Quality

    High-performance converters enable you to record and mix at up to 16-bit/ 48kHz. There is lower noise and achieves high-quality audio reproduction. Meeting the key functions required by contemporary music and producers.

    usb audio interface

    usb audio interface

    48V Phantom Power

    6.35mm port (guitar and keyboard instruments) , Signal Clip LEDs,1/4” headphone output and stereo 1/4” outputs for clear ultra-low latency monitoring lets you hear what you are playing in “real-time”,line and instrument sources 48V phantom power for use with Studio mics. Podcast, Record, Live Stream, This Portable Audio Interface Covers it All.

    Sampling precision
    16Bit Δ-Σ ADC and DAC

    Supported sample rates
    DAC: 32 kHz, 44.1 kHz, 48 kHz, ADC:8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz

    Dynamic Range
    90 dB (A-weighted)

    Frequency Response
    20 Hz to 20 kHz ±1 dB

    THD+N
    <0.01%

    Noise EIN
    -117dBu (A-weighted)

    Maximum Input Level
    +6 dBu at minimum gain

    Minimum Input Level
    -45 dBu at maximum gain

    Gain Range
    51 dB

    Input impedance
    3 kohms

    Line Input Dynamic Range
    90 dB (A-weighted)

    Frequency Response
    20 Hz to 20 kHz ±1 dB THD+N <0.01%

    Maximum Line Input Level
    +17 dBu at minimum gain

    Minimum Line Input Level
    -34 dBu at maximum gain

    Input impedance
    20 kohms

    USB Audio Interface

    USB Audio Interface

    USB AUDIO INTERFACE

    USB AUDIO INTERFACE

    【USB audio interface】 USB audio interface will be protected from any hum or interference. Also during long-distance transmission, Record singing or guitar, bass to the recording software through the recording software, so that you can make your favorite music. (NO Software or “DAW” included) your need to download the recording software yourself.
    【Perfect recording quality】High-performance converters enable you to record and mix at up to 16-bit/ 48kHz. There is lower noise and achieves high-quality audio reproduction. Meeting the key functions required by contemporary music and producers.
    【Strong compatibility】 Whether you’re a Podcaster or Beat Maker, it won’t disappoint. Compatible with almost all recording software for Mac, Windows, It can perfet match Pro Tools//Reaper/Ableton and Other DAW Recording Software.
    【TRS Balanced Outputs】 With all connection interfaces for microphone, electric guitar, bass microphone, Line signal. USB audio interface will be protected from any hum or interference. Also during long-distance transmission, TRS balanced outputs can reduce the introduction of noise. It can be connected to microphones and instruments at the same time and can be played on the computer at the same time.
    【Direct Monitor&48V phantom power】 6.35mm port (guitar and keyboard instruments) , Signal Clip LEDs,1/4” headphone output and stereo 1/4” outputs for clear ultra-low latency monitoring lets you hear what you are playing in “real-time”,line and instrument sources 48V phantom power for use with Studio mics. Podcast, Record, Live Stream, This Portable Audio Interface Covers it All.


    Are you looking to take your music recording to the next level? Look no further than the USB Audio Interface with XLR interface and 48V Phantom Power. This interface is perfect for musicians and podcasters who want high-quality sound without breaking the bank.

    With TRS balanced inputs and a headphone amplifier, this interface delivers crystal clear audio with no interference. The AudioBox Mic Preamps provide clean, transparent sound with 48V of phantom power for your condenser microphones.

    Whether you’re recording on a PC, Mac, or even streaming live, this 2-channel interface is the perfect tool for all your recording needs. Don’t settle for subpar sound quality – upgrade to the USB Audio Interface for Recording Music today and take your recordings to the next level.
    #USB #Audio #Interface #Recording #Music #XLR #interface #48V #Phantom #Power #TRS #balanced #Headphone #Amplifier #AudioBox #Mic #Preamps #48v #Channel #PCWinMac #Streaming #Podcasting,rsgrhai audio interface

  • Pyle Wireless Home Audio Amplifier System – Bluetooth Compatible Sound Stereo Receiver Amp – 6 Channel 600 Watt Power, Digital LCD, Headphone Jack, 1/4” Microphone IN USB SD AUX RCA FM Radio

    Pyle Wireless Home Audio Amplifier System – Bluetooth Compatible Sound Stereo Receiver Amp – 6 Channel 600 Watt Power, Digital LCD, Headphone Jack, 1/4” Microphone IN USB SD AUX RCA FM Radio


    Price: $69.99 – $119.99
    (as of Dec 29,2024 21:40:41 UTC – Details)



    Features: 6-channel amplifier system compact desktop audio receiver design built-in Bluetooth for wireless audio streaming, FM radio tuner with digital LCD display front panel button control center audio source input mode selector connect & playback audio from external devices, headphone jack with independent volume control (2) 1/4” Microphone input jacks built-in microphone talk-over function (Mic1 only) MP3 Digital Audio File Support USB flash drive & SD Memory Card readers push-type speaker connectors ax (3.5mm) input jack REC + Subwoofer output RCA (L/R) Connectors audio input RCA (L/R) Connectors short circuit & over voltage protection audio Configuration settings: treble, bass, Master volume, echo, mic volume, mic tone convenient audio source control for home or office use.
    600 WATT POWER: The Pyle 6 Channel home audio amplifier is perfect for your PA and home theater entertainment. It gives you 600 Watts peak power which can be used for multi speakers with 4-8 ohms impedance allowing you to enjoy high quality audio.Frequency Response : 20Hz – 20KHz. Signal to Noise Ratio: >81db.
    BLUETOOTH COMPATIBLE: The professional integrated indoor stereo receiver is compatible with wireless bluetooth and works with latest devices, including smartphones, tablets, laptops and computers. It also has a headphone jack for audio monitoring
    6 INPUTS: The personal portable digital amp box has a USB flash drive / SD card reader for MP3 / WMA playback, AUX input, dual 1/4 inches microphone in, and RCA connector. It also has FM radio with digital LCD channel display, push type speaker connector. Bluetooth Connectivity – Wireless Range Up to 40 plus feet
    TALK OVER BUTTON: The compact PA amplifier features a MIC talk over function which, when activated, the current music or audio being played will be temporarily halted. This function is used in paging, PA, voice over, and announcements
    EQ CONTROLS: The sound amplifying device has rotary knob and crisp buttons for treble, bass, master volume, echo, mic volume, mic tone configuration and source input mode selector. A remote control is also included in the package for distant control. Convenient Audio Source Control for Home or Office Use.

    Customers say

    Customers appreciate the AV receiver’s functionality, sound quality, and value for money. They find it works well for commercial locations like outdoor speakers and shops. The Bluetooth connectivity is good and compatible with their devices. Many customers find it easy to set up and use, with simple plug-and-play setup. They also like the volume control. However, some customers dislike its durability and have differing views on its overall quality.

    AI-generated from the text of customer reviews


    Looking to enhance your home audio system? Look no further than the Pyle Wireless Home Audio Amplifier System! This powerful 6-channel 600 watt system is Bluetooth compatible, allowing you to easily stream your favorite music from your smartphone or other devices.

    With a digital LCD display, headphone jack, 1/4” microphone input, USB, SD, AUX, RCA, and FM radio capabilities, this amplifier has everything you need to enjoy high-quality sound in your home. Whether you’re hosting a party, watching a movie, or just relaxing with some tunes, the Pyle Wireless Home Audio Amplifier System will take your audio experience to the next level.

    Don’t settle for mediocre sound quality – upgrade to the Pyle Wireless Home Audio Amplifier System today and transform your home entertainment experience!
    #Pyle #Wireless #Home #Audio #Amplifier #System #Bluetooth #Compatible #Sound #Stereo #Receiver #Amp #Channel #Watt #Power #Digital #LCD #Headphone #Jack #Microphone #USB #AUX #RCA #Radio,stereo sound

  • Pyle Wireless Bluetooth Home Audio Amplifier System-Upgraded 6 Channel 750 Watt Sound Power Stereo Receiver w/USB, Micro SD, Headphone,2 Microphone Input w/Echo, Talkover for PA – PTA62BT.5

    Pyle Wireless Bluetooth Home Audio Amplifier System-Upgraded 6 Channel 750 Watt Sound Power Stereo Receiver w/USB, Micro SD, Headphone,2 Microphone Input w/Echo, Talkover for PA – PTA62BT.5


    Price: $117.99
    (as of Dec 29,2024 17:16:18 UTC – Details)




    POWERFUL 750 WATT: The Pyle 6-Channel Bluetooth Home Audio Amplifier gives you 750W peak power which can be used for multi speakers w/ 4-8 ohms impedance allowing you to enjoy high quality audio. Perfect for your PA and home theater entertainment
    BLUETOOTH CAPABLE: The personal portable digital amp box works with today’s latest devices including smartphones, tablets, laptops and computers as it is equipped with Bluetooth wireless music streaming with hassle-free receiver pairing
    MULTIPLE INPUTS: The integrated indoor stereo receiver supports iPod or MP3, USB, micro SD, AUX playback, built-in FM radio w/ digital LCD display, audio input and REC + subwoofer output RCA (L/R) connectors. Also features 2 ¼” microphone inputs
    MIC TALK-OVER FUNCTION: The professional sound amplifying device features a MIC talk-over function which when activated the current music or audio being played will be temporarily halted. This function is used in paging, voice-over, and announcements
    INTEGRATED EQUALIZER: The compact amplifier has crisp buttons for the audio sources and selectors, rotary knob for equalization, mic and master volume adjustments. A remote control is also included in the package for distant audio adjustments

    Customers say

    Customers are satisfied with the audio performance and value of the AV receiver. They find it easy to set up and use, providing good sound quality for the price. Many customers appreciate its power and channel capacity. However, some have differing opinions on Bluetooth connectivity and overall quality.

    AI-generated from the text of customer reviews


    Experience the ultimate in home audio with the Pyle Wireless Bluetooth Home Audio Amplifier System! This upgraded 6 channel, 750 watt sound power stereo receiver is perfect for elevating your audio experience.

    With USB, Micro SD, headphone, and two microphone inputs with echo and talkover features, this amplifier system is perfect for use in your home entertainment setup or for hosting events and parties. The Bluetooth connectivity allows you to easily stream music from your favorite devices, while the built-in microphone inputs make it easy to host karaoke nights or make announcements at your next gathering.

    Don’t settle for average sound quality – upgrade to the Pyle Wireless Bluetooth Home Audio Amplifier System today and take your audio experience to the next level! #Pyle #HomeAudio #AmplifierSystem #BluetoothAudio
    #Pyle #Wireless #Bluetooth #Home #Audio #Amplifier #SystemUpgraded #Channel #Watt #Sound #Power #Stereo #Receiver #wUSB #Micro #Headphone2 #Microphone #Input #wEcho #Talkover #PTA62BT.5,stereo sound

  • Pyle Bluetooth Home Audio Amplifier Receiver Stereo 300W Dual Channel Sound Audio System w/MP3, USB, SD, AUX, RCA, MIC, Headphone, FM, LED, Reverb Delay, for Home Theater Speakers, Studio – PDA69BU

    Pyle Bluetooth Home Audio Amplifier Receiver Stereo 300W Dual Channel Sound Audio System w/MP3, USB, SD, AUX, RCA, MIC, Headphone, FM, LED, Reverb Delay, for Home Theater Speakers, Studio – PDA69BU


    Price: $79.99
    (as of Dec 29,2024 16:40:37 UTC – Details)



    The Pyle Stereo Amplifier Audio Receiver is designed to elevate your home audio experience with powerful, high-quality sound. Featuring a HiFi 2.0 channel audio amplifier, this stereo receiver delivers crisp, clear audio whether you’re listening to music, watching movies, or hosting a karaoke night. With built-in Bluetooth 5.0, you can stream music wirelessly from your favorite devices like iPhones, Androids, and tablets, offering seamless connectivity from up to 45 feet away. This versatile amplifier includes USB and SD card readers, an AUX input, and RCA input/output connectors, giving you the ability to connect and stream audio from multiple sources. It also features (2) microphone inputs and a headphone jack, making it perfect for karaoke or personal studio use. The big digital LED display and front panel button control center allow for easy operation, while adjustable bass, treble, and volume controls let you fine-tune your sound. Built for durability, the Pyle stereo receiver is made from high-quality metal with an aluminum alloy panel. It provides 300 watts of power and supports digital media files like MP3, WAV, WMA, and APE. With its compact design and included remote control, this bluetooth receiver is the ideal addition to any home entertainment system.
    POWERFUL STEREO AMPLIFIER SYSTEM – Enjoy high-quality sound in homes or offices with this 2.0 channel stereo receiver. With 38Wx2 RMS power and Bluetooth 5.0 wireless streaming, it easily connects to devices like iPhones, Androids, and tablets.
    WIRELESS BLUETOOTH STREAMING – With a built-in Bluetooth antenna for extended Bluetooth transmission, you can wirelessly stream music from any Bluetooth-enabled device. This amplifier makes connecting and playing your music a breeze.
    ENHANCED AUDIO CONTROL – The amplifier’s remote can control bass, treble, balance, and volume, as well as 8 sound effects and input selection for USB, SD, Bluetooth, and FM, ensuring you can fine-tune your sound exactly the way you like it.
    VERSATILE CONNECTIVITY OPTIONS – With multiple input options including USB, SD, RCA connectors, and 3.5mm AUX, this Bluetooth transmitter supports a wide range of audio devices. Reverb control for the microphone makes it suitable for live karaoke.
    COMPACT DESIGN WITH POWER – This compact stereo receiver delivers 38Wx2 RMS of powerful sound, providing incredible audio clarity and performance anywhere. It comes with a remote control, FM antenna, and a durable metal design built to last.

    Customers say

    Customers are satisfied with the sound quality, Bluetooth connectivity, and value for money of the AV receiver. They mention it works well for streaming music, listening to the radio, or using another input device. The controls are easy to adjust and simple to set up. Many find it a decent piece of equipment for the price, with high-quality controls and a solid build. Customers also appreciate the ease of setup, compact size, and FM reception. However, some customers have differing opinions on the power output.

    AI-generated from the text of customer reviews


    Looking to upgrade your home audio system? Look no further than the Pyle Bluetooth Home Audio Amplifier Receiver Stereo 300W Dual Channel Sound Audio System! With features like MP3 playback, USB and SD card inputs, AUX and RCA inputs, microphone and headphone jacks, FM radio, LED display, reverb delay effects, and more, this amplifier has everything you need for a complete home theater experience.

    Whether you’re looking to enhance your movie nights with immersive sound, or you want to take your music listening experience to the next level, the Pyle PDA69BU has you covered. Perfect for home theaters, studios, or even outdoor gatherings, this amplifier delivers powerful, crystal-clear sound that will impress even the most discerning audiophiles.

    Don’t settle for subpar sound quality – upgrade to the Pyle Bluetooth Home Audio Amplifier Receiver Stereo 300W Dual Channel Sound Audio System today and enjoy a premium audio experience like never before!
    #Pyle #Bluetooth #Home #Audio #Amplifier #Receiver #Stereo #300W #Dual #Channel #Sound #Audio #System #wMP3 #USB #AUX #RCA #MIC #Headphone #LED #Reverb #Delay #Home #Theater #Speakers #Studio #PDA69BU,stereo sound

  • NEW HONEYWELL R7249A-1003 UV AMPLIFIER R7249A1003

    NEW HONEYWELL R7249A-1003 UV AMPLIFIER R7249A1003



    NEW HONEYWELL R7249A-1003 UV AMPLIFIER R7249A1003

    Price : 300.00

    Ends on : N/A

    View on eBay
    Introducing the New Honeywell R7249A-1003 UV Amplifier R7249A1003!

    We are thrilled to introduce the latest addition to our lineup of top-of-the-line HVAC equipment: the Honeywell R7249A-1003 UV Amplifier. This amplifier is designed to provide exceptional performance and reliability, ensuring that your HVAC system operates at peak efficiency.

    The R7249A-1003 UV Amplifier features a compact design, making it easy to install in a variety of HVAC systems. With its advanced UV technology, this amplifier is able to effectively kill bacteria, mold, and other harmful pollutants, ensuring that your indoor air quality remains pristine.

    In addition, the R7249A-1003 UV Amplifier is built to last, with a durable construction that is designed to withstand the rigors of daily use. With Honeywell’s reputation for quality and innovation, you can trust that this amplifier will deliver exceptional performance for years to come.

    Upgrade your HVAC system today with the Honeywell R7249A-1003 UV Amplifier R7249A1003 and experience the difference it can make in your indoor air quality. Contact us to learn more about this exciting new product!
    #HONEYWELL #R7249A1003 #AMPLIFIER #R7249A1003, Honeywell

  • Nobsound Mini Bluetooth 5.0 Power Amplifier, Stereo Hi-Fi Digital Amp 2.0 Channel 50W×2 with AUX/USB/Bluetooth Input, Wireless Audio Receiver, PC Sound Card with Power Supply (Black)

    Nobsound Mini Bluetooth 5.0 Power Amplifier, Stereo Hi-Fi Digital Amp 2.0 Channel 50W×2 with AUX/USB/Bluetooth Input, Wireless Audio Receiver, PC Sound Card with Power Supply (Black)


    Price: $42.99 – $32.99
    (as of Dec 29,2024 15:41:04 UTC – Details)



    To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.Learn more how customers reviews work on Amazon




Review this product

Share your thoughts with other customers
Write a customer review


Customers say

Customers appreciate the electronic component amplifier for its basic functionality and value for money. They find it works well with their speakers and has an onboard sound card. Many customers appreciate its convenience, size, and power. However, some have mixed opinions on the sound quality and Bluetooth connectivity.
This is Nobsound’s new power amplifier in 2022. Based on our previous product, we enhance its output power and improve its functionality, while still keep its mini size and elegant design.
Despite its mini size(can be hold with one hand), the output power is improved to 100W(50W*2) with the upgraded chip. You will be amazed by its output power compared to its size when you see it.
Supporting AUX/USB/Bluetooth input. You can enjoy your music in different ways. The Bluetooth function is also upgraded to 5.0. Now it is more stable and faster.
We need to mention that with the USB input, music can be played losslessly(Like connecting with a computer. By the way, you don’t need to install a driver). You will be surprised by the sound quality.
Prompt and courteous customer service. If you met any troubles or had any questions, please feel free to contact us. [ISED Certification Registration Number: 30459-M1PRO; ISED Hardware Version ldentification Number (HVIN): M1 PRO]

Customers say

Customers appreciate the electronic component amplifier for its basic functionality and value for money. They find it works well with their speakers and has an onboard sound card. Many customers appreciate its convenience, size, and power. However, some have mixed opinions on the sound quality and Bluetooth connectivity.

AI-generated from the text of customer reviews


Introducing the Nobsound Mini Bluetooth 5.0 Power Amplifier: Your Ultimate Audio Companion!

Are you looking to enhance your audio experience with a compact yet powerful amplifier? Look no further than the Nobsound Mini Bluetooth 5.0 Power Amplifier! This stereo Hi-Fi digital amp features 2.0 channels and delivers a whopping 50W×2 of crystal-clear sound.

With multiple input options including AUX, USB, and Bluetooth, you can easily connect all your favorite devices for seamless wireless streaming. Whether you want to listen to music from your phone, tablet, laptop, or even your PC, this amplifier has you covered.

Not only does this amplifier function as a wireless audio receiver, but it can also double as a PC sound card, making it a versatile addition to your audio setup. Plus, with its sleek black design, it will complement any decor.

Don’t settle for subpar audio quality any longer. Upgrade to the Nobsound Mini Bluetooth 5.0 Power Amplifier and elevate your listening experience to the next level. Order yours today and start enjoying music like never before!
#Nobsound #Mini #Bluetooth #Power #Amplifier #Stereo #HiFi #Digital #Amp #Channel #50W2 #AUXUSBBluetooth #Input #Wireless #Audio #Receiver #Sound #Card #Power #Supply #Black,stereo sound

Chat Icon