Zion Tech Group

Tag: Arduino

  • L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module Arduino by Envistia Mall

    L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module Arduino by Envistia Mall


    Price: $6.49
    (as of Jan 03,2025 18:02:38 UTC – Details)



    This L298N-based driver module is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V.
    It can easily control the DC motor speed and direction, and can also control 2-phase stepper motors. It can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays using Pulse Width Modulation (PWM) control.
    Two enable inputs are provided to enable or disable the device independently of the input signals.
    The motor direction is controlled by sending a HIGH or LOW signal to the drive for each motor (or channel). For example for motor A, a HIGH to IN1 and a LOW to IN2 will cause it to turn in one direction, and a LOW and HIGH will cause it to turn in the other direction.
    The module includes an onboard 5V regulator. When enabled by the jumper, the 5V is provided as an output on the power connector, and can be used as a 5V DC supply for your other circuit components. (When enabled, the module input voltage must be at least 6V). When disabled, a separate 5V input provides in order to control the logic level circuitry of this module.
    Controller Parameters:

    • Driver chip: L298N dual H-bridge driver
    • Drive Voltage: +5V to +35V (Input voltage must be at least 6V when internal 5V regulator is enabled)
    • Drive peak current Io: 2A / Bridge
    • Logic power supply range Vss : +4V to +5.5V DC (Not required when internal regulator is enabled. When enabled, the 5V is available as an output on the power connector
    • Control signal input voltage range: 4.5-5.5V high 0V low
    • Maximum power consumption: 20W
    • Storage temperature: -25 ~ +130 C
    • Dimensions (approx): 43mm x 43mm x 27mm LxWxH (1.7″ x 1.7″ x 1.1″)
    • Weight: 26g

    Dual-channel L298N H-bridge driver can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors
    Accepts standard TTL logic level inputs to drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V
    Uses large-capacity filter capacitors and diodes with freewheeling protection function to increase reliability


    Introducing the L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module Arduino, now available at Envistia Mall!

    This versatile motor drive controller board is perfect for controlling stepper motors with your Arduino projects. With dual H-bridge design, it allows you to control the speed and direction of two motors independently.

    The board also features built-in protection diodes, overcurrent protection, and a heat sink for efficient operation. It supports PWM speed control and can drive motors with a voltage range of 5-35V and a current of up to 2A per channel.

    Whether you’re building a robot, CNC machine, or any other project that requires precise motor control, the L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module Arduino is the perfect solution. Get yours today at Envistia Mall!
    #L298N #Dual #Bridge #PWM #Stepper #Motor #Drive #Controller #Board #Module #Arduino #Envistia #Mall,ai298

  • L298N Dual H-Bridge Motor Drive Controller for Arduino Smart Car Robot Power Stepper Motor Driver Module

    L298N Dual H-Bridge Motor Drive Controller for Arduino Smart Car Robot Power Stepper Motor Driver Module


    Price: $10.99
    (as of Jan 03,2025 17:57:12 UTC – Details)



    Product features:
     This moduel integrated with one internal 5V power supply, meaning when your driving voltage is 7V-35V,it makes 5V of energy board power supply logically; when 5V of energy board power on, please not input voltage to +5V power supply in interface but you can lead 5V voltage for external usage
    Eg: ENA enable IN1 IN2 to control OUT1 OUT2
    ENB enable IN3 IN4 to control OUT3 OUT4
    Specifications:
    Double H bridge Drive Chip: L298N
    Logical voltage: 5V
    Logical current: 0-36mA
    Storage Temperature: -20 to +135
    Operating mode: H-bridge driver (dual)
    Drive voltage: 5V-35V
    Drive current: 2A (MAX single bridge)
    Maximum power: 25W
    Built-in 5v power supply, when the driving voltage is 7v-35
    Usage:
     H-Bridge’s are typically used in controlling motors speed and direction, but can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays.
    How it works:
     An H-Bridge is a circuit that can drive a current in either polarity and be controlled by Pulse Width Modulation (PWM).
    *Pulse Width Modulation is a means in controlling the duration of an electronic pulse. In motors try to imagine the brush as a water wheel and electrons as a the flowing droplets of water. The voltage would be the water flowing over the wheel at a constant rate, the more water flowing the higher the voltage. Motors are rated at certain voltages and can be damaged if the voltage is applied to heavily or if it is dropped quickly to slow the motor down. Thus PWM. Take the water wheel analogy and think of the water hitting it in pulses but at a constant flow. The longer the pulses the faster the wheel will turn, the shorter the pulses, the slower the water wheel will turn. Motors will last much longer and be more reliable if controlled through PWM.
    Package includes:
    1x L298N Module
    L298N Dual Motor Controller Module is a neat motor control module based on the L298N H-bridge IC that can allows you to control the speed and direction of two DC motors, or control one bipolar stepper motor with ease
    L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value
    Well Built Dual-channel H-bridge driver working mode creates higher working efficiency
    Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
    To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage


    If you’re looking to build a smart car robot or power a stepper motor with your Arduino, the L298N Dual H-Bridge Motor Drive Controller is the perfect module for the job. This versatile and reliable driver module allows you to control two DC motors or one stepper motor with ease.

    With this module, you can easily control the speed and direction of your motors, making it ideal for robotics projects, RC cars, and more. The L298N module also features built-in protection mechanisms to prevent damage to your motors or Arduino board.

    Whether you’re a beginner or an experienced maker, the L298N Dual H-Bridge Motor Drive Controller is a must-have for your projects. Get yours today and start building your next robotics masterpiece!
    #L298N #Dual #HBridge #Motor #Drive #Controller #Arduino #Smart #Car #Robot #Power #Stepper #Motor #Driver #Module,ai298

  • L298N Motor Driver Controller Board DC Stepper Motor Dual H-Bridge Module for Arduino Electric Projects Smart Car Robot Power UNO MEGA R3 Mega2560

    L298N Motor Driver Controller Board DC Stepper Motor Dual H-Bridge Module for Arduino Electric Projects Smart Car Robot Power UNO MEGA R3 Mega2560


    Price: $10.19
    (as of Jan 03,2025 17:44:13 UTC – Details)


    1. Through this module can use the built-in 78M05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
    2. If driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits
    3. The chip manual proposes to support 35V, but according to the book When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven

    Logic voltage: 5V ， Logic current: 0mA~36mA ，Storage Temperature: -20 ℃ to +135 ℃ ，Operating mode: H-bridge driver ( Dual ,2 channel ) ，Drive voltage: 5V~35V ，Drive current: 2A ( MAX Single bridge ) ，Maximum power: 25W
    Through this module can use the built-in 78M05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
    For specific product details and parameter information, please refer to the product description at the bottom of the page. For more information on how to use the product, please refer to the product description.
    Please Note that , This is a precision product, Please use with care. You need professional knowledge to use this product. If the product is damaged due to an operating error, it cannot be returned. beg to be excused. All products are factory tested. Tools DIY products. Please understand. Thanks .
    If the product has any quality problem , pls contact us by email , How to contact us ? Please click “ AIHJCNELE ”(you can find “Sold by AIHJCNELE ” under Buy Now button), in the new page, click “Ask a question” to email us


    Are you looking for a reliable motor driver controller board for your Arduino electric projects? Look no further than the L298N Motor Driver Controller Board DC Stepper Motor Dual H-Bridge Module! This versatile board is perfect for controlling DC motors, stepper motors, and even servo motors with ease.

    With its dual H-bridge design, the L298N board can drive motors with a voltage range of 5V to 35V and a maximum current of 2A per channel. It is compatible with popular Arduino boards like the UNO, MEGA, and Mega2560, making it a great choice for a wide range of projects.

    Whether you are building a smart car, a robot, or any other motorized project, the L298N Motor Driver Controller Board is sure to meet your needs. So why wait? Get yours today and start creating amazing electric projects!
    #L298N #Motor #Driver #Controller #Board #Stepper #Motor #Dual #HBridge #Module #Arduino #Electric #Projects #Smart #Car #Robot #Power #UNO #MEGA #Mega2560,ai298

  • LIONX 2Pack L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Compatible with Ar-duino Electric Projects, Smart Car Robot

    LIONX 2Pack L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Compatible with Ar-duino Electric Projects, Smart Car Robot


    Price: $8.99
    (as of Jan 03,2025 17:37:48 UTC – Details)


    Specification:

    • Chip: L298N
    • Logic voltage: 5V
    • Logic current: 0mA-36mA
    • Maximum power: 25W
    • Drive voltage: 5V-35V
    • Drive current: 2A (For each DC motor)
    • Operating mode: Dual H-bridge driver (can drive 2 DC motors)

    Reasons to Choose:

    1. Use of L298N as Main Chip: L298N is a high voltage, high current motor driver chip with features such as a high working voltage (maximum voltage up to 46V), large output current (instantaneous peak current up to 3A), continuous working current of 2A, and rated power of 25W. It has 15 pins in its package and two built-in H-bridge high voltage and large current full bridge drivers, making it suitable for driving DC motors, stepper motors, relay coils, and more. The chip can also be connected to external detecting resistors to provide variations to the control circuit. It is compatible with stepping motors, four-phase stepping motors, and two DC motors using standard logic level signal control.
    2. Wide Application: PChero L298N Motor Drive Controller Board Module is ideal for Ar-duino, Smart Car, Power UNO, MEGA R3, Mega 2560, and more.

    Package Included:

    • 2 x L298N Motor Drive Controller Board Module

    Package Dimensions ‏ : ‎ 6 x 4 x 2 inches; 1.6 ounces
    Date First Available ‏ : ‎ October 5, 2022
    Manufacturer ‏ : ‎ LIONX
    ASIN ‏ : ‎ B0BHFCD5HQ
    Country of Origin ‏ : ‎ China

    Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
    To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
    Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
    High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
    Large capacity filter capacitance,afterflow protection diode, more stable and reliable.


    Are you looking for a reliable motor drive controller board for your next electric project or smart car robot? Look no further than the LIONX 2Pack L298N Motor Drive Controller Board Module!

    This dual H bridge DC stepper controller is compatible with Ar-duino and is perfect for controlling the speed and direction of your motors with ease. Whether you’re building a robot, RC car, or any other electronic project, this controller board is sure to meet your needs.

    With a compact design and easy-to-use interface, the LIONX 2Pack L298N Motor Drive Controller Board Module is a must-have for any electronics enthusiast. Don’t let your project be held back by inferior motor control – invest in the best with LIONX!
    #LIONX #2Pack #L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Compatible #Arduino #Electric #Projects #Smart #Car #Robot,ai298

  • L298N L298P 4A Dual Channel Motor Driver Module Motor Shield R3 for Arduino 5V ~ 12V Free Running Stop and Brake Function

    L298N L298P 4A Dual Channel Motor Driver Module Motor Shield R3 for Arduino 5V ~ 12V Free Running Stop and Brake Function


    Price: $29.62
    (as of Jan 03,2025 17:31:26 UTC – Details)



    Introducing the L298N L298P 4A Dual Channel Motor Driver Module Motor Shield R3 for Arduino!

    This motor driver module is perfect for controlling motors with ease. It can handle a wide range of voltages from 5V to 12V, making it versatile for various projects. The dual channel design allows you to control two motors independently, giving you more flexibility in your applications.

    One of the standout features of this motor driver module is the free running stop and brake function. This allows you to stop the motor quickly and effectively, ensuring precise control over your motors. Whether you need to stop your motor in an emergency or simply want to have more control over its movements, this feature is incredibly useful.

    With easy connectivity to Arduino boards, this motor driver module is perfect for robotics, automation, and other motor control applications. Don’t miss out on the opportunity to take your projects to the next level with the L298N L298P 4A Dual Channel Motor Driver Module Motor Shield R3 for Arduino!
    #L298N #L298P #Dual #Channel #Motor #Driver #Module #Motor #Shield #Arduino #12V #Free #Running #Stop #Brake #Function,ai298

  • 2 PCS L298N Motor DC Stepper Motor Driver Controller Board Module Dual H Bridge for Arduino

    2 PCS L298N Motor DC Stepper Motor Driver Controller Board Module Dual H Bridge for Arduino


    Price: $6.95
    (as of Jan 03,2025 16:10:02 UTC – Details)



    Specification:
    Chip: L298N dual H-bridge driver chip
    Logic voltage: 5V
    Logic current： 0mA-36mA
    Working mode: H-bridge driver (dual)
    Storage Temperature: -20 ℃ to +135 ℃
    Operating mode: H-bridge driver (dual)
    Drive voltage: 5V-35V
    Drive current: 2A (MAX single bridge)
    Maximum power: 25W
    Driver Board Size：55mm*60mm*30mm
    Driver Board Weight: 33g/pcs
    Dimensions: 43x43x27mm

    -Low heat generation and excellent anti-interference performance.

    -With power up to 25w, i.e. 2A, it can run one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.

    -The larger capacity makes the capacitor impregnation behind the over current protection diode more stable and reliable.

    -This module can complete the electrical work of 78M05 by driving the power supply part. To prevent damage to the voltage regulator chip, please use an external 5V logic power supply when using a driving voltage higher than 12V.

    Warm Tips:
    -When driver voltage: 7V-12V:
    The on-board 5V logic power supply can be enabled, when using the on-board 5V power supply, the +5V power supply in the interface does not input voltage, but can draw 5V voltage for external use.

    -When the drive voltage is greater than 12V, less than or equal to 24V:
    For example, to drive a motor rated at 18V, the jumper cap enabling the on-board voltage 5V output must be removed, and then 5V must be connected outside the 5V output port to the L298N internal logic voltage supply.

    Package Included:
    2 X DC L298N Motor Driver controller Board Module
    Package Dimensions ‏ : ‎ 4.65 x 3.07 x 1.3 inches; 2.08 ounces
    Date First Available ‏ : ‎ October 27, 2023
    Manufacturer ‏ : ‎ VKLSVAN
    ASIN ‏ : ‎ B0CLYBPGP9

    【High Quality Chip】L298N as main driver chip, strong driving ability/small heating/strong anti-interference/low calorific value,can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
    【High Efficiency】Dual-channel H-bridge driver working mode creates higher working efficiency.
    【High Reliability】Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
    【Main Parameters】Drive voltage: 5V-35V, Drive current: 2A (MAX single bridge),Maximum power: 25W, Logic current 0mA-36mA,Operating mode: H-bridge driver (dual).
    【Warm Tips】To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.


    Are you looking for a reliable motor driver controller board for your Arduino projects? Look no further than the 2 PCS L298N Motor DC Stepper Motor Driver Controller Board Module Dual H Bridge!

    This versatile board is perfect for controlling DC motors, stepper motors, and even servo motors with ease. With dual H-bridge circuits, you can drive two motors simultaneously with up to 2A per channel. The built-in heat sink ensures stable performance even under heavy loads.

    Whether you’re building a robot, a CNC machine, or a custom motorized project, the L298N Motor Driver Board is a must-have tool in your arsenal. Get yours today and take your Arduino projects to the next level!
    #PCS #L298N #Motor #Stepper #Motor #Driver #Controller #Board #Module #Dual #Bridge #Arduino,ai298

  • 6pcs L298N Motor Driver Controller Board Module DC Stepper Motor Dual H-Bridge for Arduino

    6pcs L298N Motor Driver Controller Board Module DC Stepper Motor Dual H-Bridge for Arduino


    Price: $12.99
    (as of Jan 03,2025 16:02:25 UTC – Details)



    Specification:
    Chip: ST L298N dual H-bridge driver chip
    Logic Voltage: 5V
    Logic current 0mA-36mA
    Storage Temperature: -20 ¡æ to +135 ¡æ
    Operating Mode: H-bridge driver (dual)
    Drive Voltage: 5V-35V
    Drive Current: 2A (MAX single bridge)
    Maximum Power: 25W
    Driver Board Size：55mm*60mm*30mm
    Driver Board Weight:33g
    Dimensions: 43x43x27mm

    Note:
    When your driver is 7V-12V, you can enable the on-board 5V logic supply. When using the on-board 5V power supply, the + 5V power supply in the interface does not input voltage, but it can draw 5V voltage for external use.

    When the driving voltage is higher than 12V, less than or equal to 24V, for example, to drive a motor with rated voltage of 18V, the jumper cap with 5V output enabled on-board voltage must be pulled out and then outside the 5V output port Connect 5V voltage to L298N internal logic voltage supply.
    ★High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
    ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
    ★L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value.
    ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
    ★Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.


    Introducing the 6pcs L298N Motor Driver Controller Board Module DC Stepper Motor Dual H-Bridge for Arduino!

    Are you looking for a reliable and efficient motor driver controller board for your Arduino projects? Look no further than the 6pcs L298N Motor Driver Controller Board Module. This set includes 6 pieces of high-quality L298N motor driver boards, perfect for driving DC motors and stepper motors with ease.

    The L298N features dual H-bridge technology, allowing you to control the speed and direction of two motors independently. With a maximum current rating of 2A per channel and a voltage range of 5V-35V, this motor driver board is versatile and powerful enough to handle a wide range of motor types.

    Whether you’re building a robot, a CNC machine, or any other motor-controlled project, the 6pcs L298N Motor Driver Controller Board Module is the perfect choice. Easy to use and compatible with Arduino, this motor driver board will help you take your projects to the next level.

    Don’t miss out on this great deal – order your 6pcs L298N Motor Driver Controller Board Module today and start creating amazing motor-controlled projects!
    #6pcs #L298N #Motor #Driver #Controller #Board #Module #Stepper #Motor #Dual #HBridge #Arduino,ai298

  • L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino Smart Car Robot R3 2560 ESP32 ESP826

    L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino Smart Car Robot R3 2560 ESP32 ESP826


    Price: $6.49
    (as of Jan 03,2025 15:55:56 UTC – Details)



    Description:
    L298N as main chip,low heat,outstanding anti-interference performance
    High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w
    Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors
    Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply
    Large capacity filter capacitance,afterflow protection diode, more stable and reliable

    Customers say

    Customers find the product functional and of good quality for its price. They mention it works well for Raspberry Pi projects and small tracked robot projects.

    AI-generated from the text of customer reviews


    Are you looking to control motors for your Arduino smart car or robot project? Look no further than the L298N Motor Drive Controller Board Module! This dual H bridge DC stepper motor driver is perfect for driving two motors independently, making it ideal for projects that require precise control and movement.

    With compatibility with Arduino R3, 2560, ESP32, and ESP8266, this controller board is versatile and easy to use. It also features onboard voltage regulation, allowing you to power your motors and control circuits with ease.

    Whether you’re a beginner looking to add motion to your project or an experienced maker wanting more control over your motors, the L298N Motor Drive Controller Board Module is a must-have component. Get yours today and start building your next robotic creation!
    #L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Arduino #Smart #Car #Robot #ESP32 #ESP826,ai298

  • 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

    2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino


    Price: $8.99
    (as of Jan 03,2025 15:49:26 UTC – Details)


    Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
    To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
    Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
    High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
    Large capacity filter capacitance,afterflow protection diode, more stable and reliable.

    Customers say

    Customers find the single board computer functional and easy to use. They find it simple to set up and control with arduino. Many consider it a good product that lasts well. However, some have issues with heat levels and voltage drops. There are mixed opinions on value for money and size.

    AI-generated from the text of customer reviews


    Introducing the 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino!

    Are you looking for a reliable and versatile motor drive controller board for your Arduino projects? Look no further than the 2Packs L298N Motor Drive Controller Board Module. This dual H bridge DC stepper motor drive controller board is perfect for controlling motors with ease and precision.

    Whether you’re building a robot, a CNC machine, or any other project that requires motor control, this board is sure to meet your needs. It can drive up to 2 DC motors or one stepper motor, making it perfect for a wide range of applications.

    The L298N chip on this board provides high efficiency and low heat generation, ensuring smooth and reliable operation. With built-in protection diodes, you can rest assured that your motors are safe from reverse polarity and voltage spikes.

    Don’t let motor control be a headache in your projects. Grab a 2Packs L298N Motor Drive Controller Board Module today and take your Arduino projects to the next level!
    #2Packs #L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Arduino,ai298

  • DEVMO 10 Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Compatible with Ar-duino Electric Projects, Smart Car Robot

    DEVMO 10 Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Compatible with Ar-duino Electric Projects, Smart Car Robot


    Price: $24.99
    (as of Jan 03,2025 15:43:03 UTC – Details)



    Specification:

    Chip: L298N
    Logic voltage: 5V
    Logic current 0mA-36mA
    Maximum power: 25W
    Drive voltage: 5V-35V
    Drive current: 2A(For each DC motor)
    Operating mode: Dual H-bridge driver (can drive 2 DC motors)

    Reason 1: Use L298N for Main Chip

    L298N is a kind of high voltage, high current motor driver chip. Features as high working voltage (maximum voltage up to 46V), large output current (instantaneous peak current up to 3A), continuous working current 2A and 25W of rated power. Having 15 pins as package.
    Two built-in H Birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on.
    The chip can connects to external detecting resistor to give the variations to the control circuit.
    Using L298N Chip to drive the motor, the chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal, which enables the internal logic circuit part works at low voltage.

    Reason 2: Wide Application

    PChero L298N Motor Drive Controller Board Module is ideal for Ar-duino, Smart Car, Power UNO, MEGA R3, Mega 2560, etc.

    Package Included :

    10 x L298N Motor Drive Controller Board Module.
    Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
    To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
    Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
    High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
    Large capacity filter capacitance,afterflow protection diode, more stable and reliable.


    Are you looking for a reliable motor drive controller board for your electric projects or smart car robot? Look no further than the DEVMO 10 Packs L298N Motor Drive Controller Board Module!

    This dual H bridge DC stepper controller is compatible with Ar-duino and is perfect for controlling motors in a variety of projects. Whether you’re building a robot, a RC car, or any other motorized device, this controller board is perfect for the job.

    With 10 packs included, you’ll have plenty of controllers on hand for all your projects. Plus, the L298N chip on board ensures reliable and efficient motor control.

    Don’t let your projects stall due to inadequate motor control. Get your hands on the DEVMO 10 Packs L298N Motor Drive Controller Board Module today and take your electric projects to the next level!
    #DEVMO #Packs #L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Compatible #Arduino #Electric #Projects #Smart #Car #Robot,ai298

  • Hello, how can I help you today?
Gathering thoughts.. ...
Powered by AI
Chat Icon