Price: $369.80
(as of Dec 16,2024 06:43:44 UTC – Details)
Product Description
Basic parameter
Size: 80*224mm
Cooling: Air cooling
Power: 2.2KW
Voltage: 110v
Current: 20A
Frequency: 400Hz
Speed: 0-24000rpm
Runout Off: Less than 0.01mm
Diameter: 80mm
4 PCS Fully sealed angular contact bearings
Collet: ER20
Grease Lubrication
We are the spindle manufacturer,we use better material to produce the spindle.
1.We use steel bearings seat,spindle will not morph during the using life.Increase the spindle using life.
2.We use 4 pcs 7 series fully sealed angular contact ball bearings, it quality much better, usually use it 1-2 years without any problems.
3. Full power spindle, stronger shaft and coil,more power in engraving and cutting working.
4. Precision 0.01mm.Coaxial degree less than 0.0025mm,suitable for high accuracy work.
5. Carefull assembly make the spindle more precisional. 3-4 hours testing after assemble, 99.9% pass rate. No worry after ordering.
6. We work with biggest CNC router manufacturer in USA, EU,RU. Strong work partners.
Basic parameter
Power: 2.2KW
Input Voltage: 110v
Input Phase: 1 or 3 phase
Input Frequency: 50-60Hz
Output Voltage: 110v
Output Current: 17.5A
Output Frequency: 0-1000Hz
Control Method: V/F control
Basic parameter
Diameter: 80mm
Material: Cast Aluminium
Feature:
Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth.
Cast aluminium fixture is much heavier than aluminiumprofile fixture.
If the spindle will not be used for a long time, please keep the spindle oil sealed to prevent rust from being unused for a long time. Before shipping , we did the oil seal to avoid the rust during the long shipment. When you get the spindle, please clearing the oil seal before using. Thank you.
Water cooled spindle MUST be used with water pump. Otherwise the spindle will soon broken.
AC spindle motor MUST use with inverter. The power of inverter need equal or bigger than the spindle power. Before using,please set up the inverter parameters suitable for spindle. Otherwise the spindle and inverter will broken at once.
When you use the spindle,the noise is not same as always,please STOP the spindle at once. You may need to replace the spindle bearings.
AC 110V Spindle motor (Must need connect to inverter/VFD)
4PCS 7Series angular contact bearing, exterd the spindle using life.
Spindle connect to GND, Pin-4 connect to inverter GND.
Spindle 1-2-3 connect to Inverter U. V. W.
Spindle motor used 4pcs ceramic ball bearings.
Introducing the Gpenny 2.2KW ER20 D80 110v Air cooled spindle motor kit with Ceramic ball bearings, QL Inverter, and 80mm Bracket!
If you’re looking for a high-quality, reliable spindle motor kit for your CNC machine, look no further than the Gpenny 2.2KW ER20 D80 110v Air cooled spindle motor kit. This kit includes a powerful 2.2KW spindle motor with ER20 collet chuck and ceramic ball bearings, ensuring smooth and precise operation for all your machining needs.
The included QL Inverter provides precise speed control and reliable performance, while the 80mm bracket makes installation a breeze. Whether you’re a hobbyist or a professional machinist, this spindle motor kit is sure to meet your needs and exceed your expectations.
Upgrade your CNC machine with the Gpenny 2.2KW ER20 D80 110v Air cooled spindle motor kit today and experience the difference in performance and reliability. Order yours now and take your machining projects to the next level!
#Gpenny #2.2KW #ER20 #D80 #110v #Air #cooled #spindle #motorCeramic #ball #bearings #kit #Inverter #80mm #Bracket
You must be logged in to post a comment.