Zion Tech Group

Tag: Grinding

  • Backfield Report: For those still grinding in Week 18

    Backfield Report: For those still grinding in Week 18


    Most fantasy leagues concluded their season in Week 17, but it’s not lost on me that some leagues/formats push on through Week 18. As a result, I’m back with one more Backfield Report to close out the 2024 season.

    As was the case with last week’s abbreviated holiday edition, I will once again be shortening things up a bit here with New Year’s Eve upon us.

    Data on all 32 backfields from Week 17 will be provided as always, but I’ll be limiting the write-ups only to backfields with ambiguous situations this week. Once again, I thank everyone who made the Backfield Report a part of their weekly reads. Best of luck in Week 18 and in 2025.

    Cheers.

    Arizona Cardinals

    • Michael Carter (Week 17: 52 snaps, 15 opportunities, 25 routes, 2 targets)
    • James Conner (Week 17: 12 snaps, 7 opportunities, 6 routes, 3 targets)
    • DeeJay Dallas (Week 17: 11 snaps, 1 opportunity, 4 routes, 1 target)

    Notes: It wasn’t exactly a rug pull, but the James Conner situation ruined a lot of fantasy teams in Week 17. After suffering a knee injury in Week 16, Conner was listed as questionable for Week 17. Despite being at less than 100 percent and playing in a meaningless game, Conner suited up against the Rams and made it all of 12 snaps before being pulled for the game. The end result? Michael Carter (again) took over as the team’s lead back and turned 13 carries into 70 yards while catching two passes for another 11 yards. It’s difficult to imagine the Cardinals playing Conner in Week 18 against the 49ers. The veteran running back signed a two-year contract extension this offseason, creating an added incentive to ensure he’s at full health heading into 2025. If Conner sits, Carter could make for an interesting Week 18 streamer in redraft leagues and a cheap DFS option. Over the last two weeks, he’s rushed 18 times for 88 yards (4.9 YPC), while adding another seven catches for 41 yards on a 55.8 percent snap share.

    Atlanta Falcons

    • Bijan Robinson (Week 17: 55 snaps, 22 opportunities, 26 routes, 5 targets)
    • Tyler Allgeier (Week 17: 8 snaps, 3 opportunities, 1 route, 0 targets)

    Baltimore Ravens

    • Derrick Henry (Week 17: 40 snaps, 29 opportunities, 5 routes, 2 targets)
    • Keaton Mitchell (Week 17: 16 snaps, 12 opportunities, 4 routes, 1 target)
    • Rasheen Ali (Week 17: 5 snaps, 1 opportunity, 3 routes, 0 targets)

    Buffalo Bills

    • James Cook (Week 17: 29 snaps, 15 opportunities, 9 routes, 0 targets)
    • Ty Johnson (Week 17: 17 snaps, 5 opportunities, 12 routes, 1 target)
    • Ray Davis (Week 17: 14 snaps, 7 opportunities, 3 routes, 1 target)

    Notes: The Bills have already confirmed that Josh Allen will start in Week 18 to keep is starts streak alive, but said they don’t anticipate him playing long. The team plays to use a “blend” of starters and backups in Week 18 against the Patriots, according to an article published on the team site, making James Cook a risky option to bet on. If you’re looking for a streaming option, rookie Ray Davis, despite ranking third amongst Bills RBs in snap share (21 percent), has the second-most opportunities (114) on the team and broke out for 152 yards from scrimmage on 23 opportunities in Week 6 against the Jets with Cook sidelined.

    Carolina Panthers

    • Raheem Blackshear (Week 17: 35 snaps, 8 opportunities, 17 routes, 0 targets)

    • Mike Boone (Week 17: 11 snaps, 4 opportunities, 8 routes, 2 targets)

    Notes: Chuba Hubbard was placed on injured reserve last week and Raheem Blackshear/Mike Boone combined for 31 yards on 12 opportunities in Week 17 against the Buccaneers. This is a backfield to avoid in Week 18 against the Falcons, even with Miles Sanders expected back.

    Chicago Bears

    • D’Andre Swift (Week 17: 38 snaps, 17 opportunities, 18 routes, 5 targets)
    • Roschon Johnson (Week 17: 20 snaps, 4 opportunities, 6 routes, 0 targets)

    Cincinnati Bengals

    • Chase Brown (Week 17: 67 snaps, 24 opportunities, 33 routes, 4 targets)
    • Khalil Herbert (Week 17: 18 snaps, 4 opportunities, 6 routes, 0 targets)
    • Trayveon Williams (Week 17: 1 snaps, 0 opportunities, 0 routes, 0 targets)

    Notes: Chase Brown suffered a sprained ankle in Week 17’s win over the Broncos and is looking iffy for Week 18’s game against the Steelers. Khalil Herbert finished last week with the second-most snaps (18) and opportunities among Bengals running backs last week and would be the likely favorite to lead the backfield if Brown cannot go. Herbert has proven to be a solid back when given the chance, but opportunities have been hard to come by in 2024 for the fourth year back. He has just 16 carries for 61 yards and one touchdown this season and has just nine opportunities in seven games with the Bengals since they acquired him at this year’s trade deadline. Brown will be hard to trust even if active, but I wouldn’t put it past the Bengals to give him ample opportunities as they battle for their playoff lives this week. That said, trusting anyone in this backfield will come down to how much risk you’re willing to leave yourself open to.

    Cleveland Browns

    • D’Onta Foreman (Week 17: 36 snaps, 15 opportunities, 13 routes, 2 targets)
    • Pierre Strong (Week 17: 28 snaps, 10 opportunities, 16 routes, 3 targets)
    • Jerome Ford (Week 17: 13 snaps, 6 opportunities, 4 routes, 0 targets)

    Notes: The Browns continue to limp toward the finish line of another disappointing season. Jerome Ford suffered an ankle injury in Week 17’s loss to the Dolphins and is looking like a shaky option in Week 18 against the Ravens whether he suits up or not. D’Onta Foreman ran for 49 scoreless yards on 13 carries last week, while Pierre Strong ran for 33 scoreless yards on five carries and added another three receptions for 11 yards. Strong could make for an interesting option in PPR formats, but this offense is broken beyond repair. It’s probably best to avoid all Browns against a Ravens team that needs a win to lock up the AFC North title.

    Dallas Cowboys

    • Rico Dowdle (Week 17: 40 snaps, 24 opportunities, 15 routes, 1 target)
    • Ezekiel Elliott (Week 17: 10 snaps, 3 opportunities, 5 routes, 0 targets)

    Denver Broncos

    • Javonte Williams (Week 17: 22 snaps, 2 opportunities, 19 routes, 2 targets)
    • Audric Estime (Week 17: 18 snaps, 10 opportunities, 3 routes, 1 target)
    • Jaleel McLaughlin (Week 17: 14 snaps, 12 opportunities 2 routes, 2 targets)

    Notes: It’s not every day you see a running back lead his backfield in snaps while ranking dead last in opportunities, but that’s exactly what Javonte Williams accomplished in Week 17 against the Bengals. Williams shouldn’t have been on anybody’s fantasy radar after a bad 2024, but last week’s performance should serve as the ultimate sign to fade him in Week 18. Jaleel McLaughlin, who had the fewest snaps of any Broncos running back, led the team with 12 opportunities and turned 76 scoreless yards on 12 touches (6.3 YPT) for an efficient day of work. The Broncos are still fighting for their playoff lives and are expected to face a flurry of Chiefs backups, with the Chiefs already securing the No. 1 seed in the AFC playoffs. McLaughlin makes for an interesting RB3/FLEX play in a game that should feature a positive game script for the Broncos.

    Detroit Lions

    • Jahmyr Gibbs (Week 17: 36 snaps, 22 opportunities, 14 routes, 4 targets)
    • Craig Reynolds (Week 17: 23 snaps, 9 opportunities, 6 routes, 2 targets)
    • Jermar Jefferson (Week 17: 6 snaps, 3 opportunities, 2 routes, 0 targets)
    • Sione Vaki (Week 17: 2 snaps, 0 opportunities, 2 routes, 0 targets)

    Green Bay Packers

    • Josh Jacobs (Week 17: 36 snaps, 17 opportunities, 9 routes, 0 targets)
    • Emanuel Wilson (Week 17: 18 snaps, 6 opportunities, 6 routes, 0 targets)
    • Chris Brooks (Week 17: 7 snaps, 0 opportunities, 2 routes, 0 targets)

    Houston Texans

    • Joe Mixon (Week 17: 26 snaps, 11 opportunities, 11 routes, 2 targets)
    • Dameon Pierce (Week 17: 14 snaps, 5 opportunities, 5 routes, 0 targets)
    • Dare Ogunbowale (Week 17: 14 snaps, 3 opportunities, 8 routes, 1 target)

    Indianapolis Colts

    • Jonathan Taylor (Week 17: 65 snaps, 36 opportunities, 25 routes, 4 targets)
    • Trey Sermon (Week 17: 6 snaps, 1 opportunity, 4 routes, 1 target)
    • Tyler Goodson (Week 17: 2 snaps, 0 opportunities, 1 route, 0 targets)

    Jacksonville Jaguars

    • Travis Etienne (Week 17: 27 snaps, 17 opportunities, 7 routes, 2 targets)
    • Tank Bigsby (Week 17: 23 snaps, 12 opportunities, 6 routes, 1 target)
    • D’Ernest Johnson (Week 17: 7 snaps, 2 opportunities, 7 routes, 2 targets)

    Notes: Travis Etienne and Tank Bigsby continue to split backfield opportunities. Since Week 14, Etienne has earned a 55.3 percent snap share to Bigsby’s 36.8 percent but has 56 total opportunities to Bigsby’s 57. The passing work continues to favor Etienne, although you wouldn’t know it by Week 17’s splits. He’s run 65.8 percent of the team’s running back routes over the last four weeks and leads the backfield with 14 targets. Etienne is still looking for his first top-12 week of the season, which he’ll hope comes in Week 18 against the lowly Colts defense.

    Kansas City Chiefs

    • Kareem Hunt (Week 17: 28 snaps, 9 opportunities, 9 routes, 0 targets)
    • Isiah Pacheco (Week 17: 19 snaps, 6 opportunities, 7 routes, 0 targets)
    • Samaje Perine (Week 17: 10 snaps, 4 opportunities, 6 routes, 2 targets)

    Notes: Isiah Pacheco suffered a rib injury in Week 17’s win over the Steelers and is already expected to miss Week 18’s game against the Broncos. However, the Chiefs were already expected to rest several starters in the season finale with the No. 1 seed in the AFC playoffs already secured. Fantasy managers targeting this backfield should expect Samaje Perine and rookie Carson Steele to handle most of the backfield looks. Although, it’s hard to know how Andy Reid could divvy up those opportunities.

    Don’t miss episodes of Fantasy Football Happy Hour with Matthew Berry and Rotoworld Football Show all season long for the latest player news, waiver wire help, start/sit advice, and much more.

    Las Vegas Raiders

    • Ameer Abdullah (Week 17: 46 snaps, 24 opportunities, 18 routes, 4 targets)
    • Alexander Mattison (Week 17: 23 snaps, 13 opportunities, 11 routes, 3 targets)
    • Notes: Fantasy managers who played Ameer Abdullah in Week 17 against the Saints wound up having a league winner on their hands. Abdullah emerged to lead the Raiders’ backfield in snaps and opportunities and ended the week with 17.7 PPR points — good for an RB7 finish on the week. Abdullah actually posted three straight top-15 PPR weeks to close out the fantasy season and should be viewed as the only viable option in the Raiders’ backfield in next week’s game against the Chargers.

    Los Angeles Chargers

    • J.K. Dobbins (Week 17: 42 snaps, 20 opportunities, 14 routes, 1 target)
    • Hassan Haskins (Week 17: 26 snaps, 9 opportunities, 14 routes, 1 target)
    • Kimani Vidal (Week 17: 9 snaps, 6 opportunities, 4 routes, 1 target)

    Notes: Playing in his first game since Week 12, J.K. Dobbins stepped in to immediately handle 20 opportunities for the Chargers, who were without Gus Edwards (ankle, IR) and will be without him again this week. That said, the Chargers secured their spot in the AFC playoff race with a win over the Patriots, and Jim Harbaugh hasn’t offered much clarity on whether or not he plans to rest starters in Week 18 against the Raiders. If Harbaugh does opt to sit Dobbins, the work would go to Hassan Haskins and Kimani Vidal. Vidal has seen 26 opportunities over the last four weeks to Haskins’ 11, but both could see an even split if active, with Haskins likely having a bit more upside as the bigger back who could be used around the goal line.

    Los Angeles Rams

    • Kyren Williams (Week 17: 51 snaps, 16 opportunities, 19 routes, 3 targets)
    • Blake Corum (Week 17: 3 snaps, 3 opportunities, 0 routes, 0 targets)

    Notes: Head coach Sean McVay said on Monday that he’s “Excited about watching Blake Corum get a heavy workload” in Week 18’s game against the Seahawks. The Seahawks have allowed the 15th most fantasy points per game to opposing running backs over the last five weeks, making Corum a potential smash in a week where he sounds like a lock for double-digit touches.

    Miami Dolphins

    • De’Von Achane (Week 17: 31 snaps, 12 opportunities, 16 routes, 2 targets)
    • Raheem Mostert (Week 17: 21 snaps, 8 opportunities, 9 routes, 2 targets)
    • Jeff Wilson (Week 17: 8 snaps, 3 opportunities, 2 routes, 0 targets)
    • Jaylen Wright (Week 17: 1 snap, 0 opportunities, 1 routes, 0 targets)

    Minnesota Vikings

    • Aaron Jones (Week 17: 37 snaps, 16 opportunities, 16 routes, 4 targets)
    • Cam Akers (Week 17: 21 snaps, 9 opportunities, 8 routes, 3 targets)
    • Ty Chandler (Week 17: 7 snaps, 5 opportunities, 2 routes, 0 targets)

    Notes: Aaron Jones suffered a quad contusion in the Vikings Week 17 win over the Packers and didn’t return to the game. Head coach Kevin O’Connell said on Monday that Jones is “doing well.” We don’t have much to go on at the moment, but the early belief is that Jones will get a chance to play in a pivotal Week 18 clash against the Lions that will decide the winner of the NFC North and the No. 1 seed in the NFC playoffs. If Jones can’t go or is limited, Cam Akers would serve as his replacement, but there’s little reason to be high on Akers at this time.

    New England Patriots

    • Antonio Gibson (Week 17: 28 snaps, 13 opportunities, 10 routes, 1 target)
    • Rhamondre Stevenson (Week 17: 20 snaps, 3 opportunities, 15 routes, 1 target)

    Notes: Antonio Gibson played over Rhamondre Stevenson in Week 17’s loss to the Chargers, as the Patriots hoped to send a message to Stevenson, who has struggled with ball security this season. Gibson didn’t turn the ball over in Saturday’s loss, but most of his production came on the final few drives with the game well out of reach. The Patriots season concludes in Week 18 against a Bills team that is expected to rest several starters. If head coach Jerod Mayo wants to send one more message to Stevenson, Gibson could be in line for a high-volume week. That said, he still feels like a touchdown-dependent play.

    New Orleans Saints

    • Clyde Edwards-Helaire (Week 17: 24 snaps, 9 opportunities, 17 routes, 4 targets)
    • Jamaal Williams (Week 17: 22 snaps, 3 opportunities, 15 routes, 1 target)
    • Kendre Miller (Week 17: 7 snaps, 4 opportunities, 2 routes, 1 target)

    Notes: No, your eyes are not playing tricks on you. Former first-rounder Clyde Edwards-Helaire made his debut with the Saints in Week 17 and wound up leading the team in snaps and opportunities after Kendre Miller left the game with a concussion. Miller is now in concussion protocol and could be a long shot to play in Week 18’s finale against the Buccaneers. Should Miller miss next week, his absence could open the door for CEH to once again step into a lead role. Last week, Edwards-Helaire totaled 30 yards from scrimmage on seven touches, with 20 of his yards coming on the ground. Even if the volume is there, he feels like a relatively thin play against a Buccaneers team that will be battling to win the NFC South this weekend.

    New York Giants

    • Tyrone Tracy (Week 17: 35 snaps, 23 opportunities, 8 routes, 3 targets)
    • Devin Singletary (Week 17: 14 snaps, 6 opportunities, 7 routes, 1 target)
    • Eric Gray (Week 17: 5 snaps, 0 opportunities, 0 routes, 0 targets)

    New York Jets

    • Breece Hall (Week 17: 27 snaps, 11 opportunities, 12 routes, 1 target)
    • Braelon Allen (Week 17: 18 snaps, 6 opportunities, 8 routes, 0 targets)
    • Isaiah Davis (Week 17: 13 snaps, 4 opportunities, 7 routes, 1 target)

    Philadelphia Eagles

    • Saquon Barkley (Week 17: 45 snaps, 33 opportunities, 9 routes, 2 targets)
    • Kenneth Gainwell (Week 17: 15 snaps, 4 opportunities, 5 routes, 1 target)
    • Tyrion Davis-Price (Week 17: 5 snaps, 3 opportunities, 0 routes, 0 targets)

    Pittsburgh Steelers

    • Jaylen Warren (Week 17: 39 snaps, 17 opportunities, 17 routes, 6 targets)
    • Najee Harris (Week 17: 33 snaps, 17 opportunities, 18 routes, 4 targets)
    • Cordarrelle Patterson (Week 17: 1 snap, 1 opportunity, 0 routes, 0 targets)

    Notes: The Steelers continue to split snaps/opportunities between Najee Harris and Jaylen Warren, although some of this can likely be due to game script. We saw Warren out-snap Harris 40-17 in Week 16’s loss to the Ravens while also seeing 17 opportunities to Harris’ 10, and Warren again saw a heavy dosage this week. The Steelers play the second of two games set to take place on Saturday, with the Ravens and Browns squaring off in the first game. Head coach Mike Tomlin said earlier in the week that he had no plan to rest his starters in Week 18, but if the Ravens beat the Browns on Saturday, the Steelers would have nothing left to play for when they kick off against the Bengals. If they do play their starters, Warren could have plenty of PPR upside if the Bengals offense remains as hot as it’s been in recent weeks, while Harris will continue to look like a touchdown-dependent play.

    Seattle Seahawks

    • Zach Charbonnet (Week 17: 39 snaps, 18 opportunities, 13 routes, 3 targets)
    • Kenny McIntosh (Week 17: 12 snaps, 7 opportunities, 2 routes, 0 targets)

    San Francisco 49ers

    • Isaac Guerendo (Week 17: 36 snaps, 13 opportunities, 18 routes, 4 targets)
    • Patric Taylor (Week 17: 13 snaps, 0 opportunities, 7 routes, 0 targets)

    Tampa Bay Buccaneers

    • Bucky Irving (Week 17: 40 snaps, 24 opportunities, 14 routes, 4 targets)
    • Rachaad White (Week 17: 27 snaps, 7 opportunities, 12 routes, 1 target)
    • Sean Tucker (Week 17: 15 snaps, 9 opportunities, 2 routes, 1 target)

    Notes: In what was a must-win game for the Buccaneers in Week 17 against the Panthers, Rachaad White saw a season-low seven opportunities, which were two less than the nine Sean Tucker saw. Fantasy managers hoping for something better in Week 18 against the Saints should temper expectations, as the Buccaneers once again need a win to secure the NFC South. Bucky Irving looks like the only reliable option in Tampa’s backfield, while White gives boom-or-bust RB3 vibes. There’s a chance he’s in the dog house after his fumble in Week 16 that ended any hopes of a comeback against the Cowboys.

    Tennessee Titans

    • Tyjae Spears (Week 17: 45 snaps, 25 opportunities, 15 routes, 4 targets)
    • Julius Chestnut (Week 17: 25 snaps, 4 opportunities, 19 routes, 1 target)

    Note: Tony Pollard (ankle) missed Week 17’s game against the Jaguars, which paved the way for Tyjae Spears to have a busy day. Spears saw 25 opportunities in the 20-13 defeat and totaled 103 scoreless yards from scrimmage. Unfortunately, he also left with a concussion and may miss Week 18’s game against the Texans as a result. The Titans have ruled out Pollard playing in Week 18, making this backfield a mess just hours before the team takes the field for its first practice of the week. There’s no fantasy upside here if both Pollard and Spears are sidelined in the finale. Should both play, they would have top-24 PPR upside, with a chance at more if only one can go.

    Washington Commanders

    • Brian Robinson (Week 17: 45 snaps, 15 opportunities,14 routes, 2 targets)
    • Jeremy McNichols (Week 17: 22 snaps, 4 opportunities, 18 routes, 3 targets)
    • Chris Rodriguez (Week 17: 18 snaps, 6 opportunities, 6 routes, 1 target)

    NOTE: Stats and information courtesy of PFF.com, RotoViz.com, ProFootballReference.com, NextGenStats.NFL.com, 4For4.com, FantasyPoints.com and RBSDM.com. All scoring is based on full-PPR leagues.





    Week 18 of the NFL season is here and for those still grinding in fantasy football or trying to secure a playoff spot, the backfield situation can be crucial. Let’s take a look at some key backfield reports for Week 18:

    1. Los Angeles Rams: With Darrell Henderson Jr. dealing with a knee injury, Sony Michel could see an increased workload against the San Francisco 49ers. Keep an eye on Henderson’s status leading up to game time.

    2. Green Bay Packers: Aaron Jones is expected to return from injury this week, but AJ Dillon has been playing well in his absence. It could be a split backfield for the Packers, so monitor the situation closely.

    3. Indianapolis Colts: Jonathan Taylor continues to dominate the backfield for the Colts, but Marlon Mack has been seeing some increased touches. Taylor remains a must-start, but Mack could be a sneaky flex play in deeper leagues.

    4. Miami Dolphins: Duke Johnson has been the lead back for the Dolphins with Myles Gaskin on the COVID-19 list. Johnson has been productive in recent weeks and could be a solid RB2 option against the New England Patriots.

    5. Seattle Seahawks: Rashaad Penny has emerged as the lead back for the Seahawks, but Alex Collins could still see some touches. Penny is the safer play, but Collins could be a desperation flex option.

    As always, make sure to check for any last-minute updates leading up to kickoff and adjust your lineup accordingly. Good luck to all those still grinding in Week 18!

    Tags:

    1. Week 18 backfield report
    2. Fantasy football backfield analysis
    3. Running back updates for Week 18
    4. NFL backfield breakdown
    5. RB injury news for Week 18
    6. Best backfield matchups for fantasy playoffs
    7. Start or sit advice for Week 18 RBs
    8. Fantasy football playoff backfield rankings
    9. Running back sleepers for Week 18
    10. Expert advice on Week 18 backfield situations

    #Backfield #Report #grinding #Week

  • GRINDING SPINDLE 380V 2.2kW 2835rpm ø200×46 /#R M1TH 7984

    GRINDING SPINDLE 380V 2.2kW 2835rpm ø200×46 /#R M1TH 7984



    GRINDING SPINDLE 380V 2.2kW 2835rpm ø200×46 /#R M1TH 7984

    Price : 1997.39 – 1,997.39

    Ends on : N/A

    View on eBay
    Are you in need of a high-quality grinding spindle for your industrial machinery? Look no further than our Grinding Spindle 380V 2.2kW 2835rpm ø200×46 /#R M1TH 7984. This powerful spindle is designed to deliver exceptional performance and durability, making it the perfect choice for all your grinding needs.

    With a voltage of 380V and a power output of 2.2kW, this spindle is capable of delivering a maximum speed of 2835rpm. Its ø200×46 size makes it suitable for a wide range of applications, and its sturdy construction ensures long-lasting reliability. Whether you’re grinding metal, wood, or any other material, this spindle will provide the precision and power you need to get the job done.

    Don’t settle for subpar grinding spindles – invest in the best with our Grinding Spindle 380V 2.2kW 2835rpm ø200×46 /#R M1TH 7984. Contact us today to learn more about this exceptional product and how it can benefit your business.
    #GRINDING #SPINDLE #380V #2.2kW #2835rpm #ø200×46 #M1TH, Spindle motor

  • Mini 17mm 7-pole Rotor Coreless Motor DC3V~6V High Speed Grinding Tattoo Machine

    Mini 17mm 7-pole Rotor Coreless Motor DC3V~6V High Speed Grinding Tattoo Machine



    Mini 17mm 7-pole Rotor Coreless Motor DC3V~6V High Speed Grinding Tattoo Machine

    Price : 10.99

    Ends on : N/A

    View on eBay
    Looking for a high-speed, powerful motor for your tattoo machine? Look no further than the Mini 17mm 7-pole Rotor Coreless Motor DC3V~6V! This compact motor is designed to provide precise and efficient performance, making it perfect for grinding and tattooing.

    With a voltage range of 3V to 6V, this motor offers versatility and reliability, ensuring smooth operation every time. The 7-pole rotor design delivers high-speed performance, allowing you to work quickly and efficiently without compromising on quality.

    Whether you’re a professional tattoo artist or a DIY enthusiast, this motor is sure to meet your needs. Don’t settle for anything less than the best when it comes to your tattoo machine – invest in the Mini 17mm 7-pole Rotor Coreless Motor DC3V~6V today!
    #Mini #17mm #7pole #Rotor #Coreless #Motor #DC3V6V #High #Speed #Grinding #Tattoo #Machine, Spindle motor

  • 3Pcs Portable Self Grinding Saw One Hitter Metal Bat Tobacco Smoking Dugout Pipe

    3Pcs Portable Self Grinding Saw One Hitter Metal Bat Tobacco Smoking Dugout Pipe



    3Pcs Portable Self Grinding Saw One Hitter Metal Bat Tobacco Smoking Dugout Pipe

    Price : 7.00

    Ends on : N/A

    View on eBay
    Introducing the 3Pcs Portable Self Grinding Saw One Hitter Metal Bat Tobacco Smoking Dugout Pipe!

    Looking for a convenient and discreet way to enjoy your favorite tobacco? Look no further than this innovative self-grinding saw one-hitter pipe. This sleek and compact pipe is perfect for on-the-go use and is designed for easy grinding and packing of your tobacco.

    Made from high-quality metal, this durable pipe is built to last and is a stylish addition to any smoker’s collection. The self-grinding feature makes it easy to prepare your tobacco quickly and efficiently, while the one-hitter design ensures a smooth and satisfying smoking experience every time.

    Whether you’re at home or out and about, this portable dugout pipe is the perfect companion for any smoking enthusiast. Don’t miss out on this must-have accessory for all your smoking needs!

    Get your hands on the 3Pcs Portable Self Grinding Saw One Hitter Metal Bat Tobacco Smoking Dugout Pipe today and elevate your smoking experience to the next level. #smokeinstyle #selfgrindingpipe #tobaccopipe #dugoutpipe
    #3Pcs #Portable #Grinding #Hitter #Metal #Bat #Tobacco #Smoking #Dugout #Pipe,smoke

  • LOT OF 40 PENCIL A46-TB GRINDING WHEELS 3″ X 1/16″ X 3/8″ 25000 RPM MAX (248-1)

    LOT OF 40 PENCIL A46-TB GRINDING WHEELS 3″ X 1/16″ X 3/8″ 25000 RPM MAX (248-1)



    LOT OF 40 PENCIL A46-TB GRINDING WHEELS 3″ X 1/16″ X 3/8″ 25000 RPM MAX (248-1)

    Price : 25.00

    Ends on : N/A

    View on eBay
    Looking to stock up on grinding wheels? We’ve got a great deal for you! We have a lot of 40 PENCIL A46-TB grinding wheels available for purchase. These wheels measure 3″ x 1/16″ x 3/8″ and have a maximum RPM of 25000.

    These high-quality grinding wheels are perfect for a variety of applications and are sure to get the job done efficiently. Don’t miss out on this opportunity to snag 40 grinding wheels at a great price.

    Get your hands on this lot of 40 PENCIL A46-TB grinding wheels today!
    #LOT #PENCIL #A46TB #GRINDING #WHEELS #RPM #MAX,46tb

  • 1.5KW Water Cooled Spindle Motor 220V CE Grinding 24000rpm 65mm ER11 Collet

    1.5KW Water Cooled Spindle Motor 220V CE Grinding 24000rpm 65mm ER11 Collet



    1.5KW Water Cooled Spindle Motor 220V CE Grinding 24000rpm 65mm ER11 Collet

    Price : 127.35

    Ends on : N/A

    View on eBay
    Are you in need of a powerful and reliable spindle motor for your grinding applications? Look no further than our 1.5KW Water Cooled Spindle Motor! With a voltage of 220V and a maximum speed of 24000rpm, this motor is sure to meet all of your grinding needs.

    Equipped with a 65mm ER11 collet, this spindle motor is versatile and compatible with a wide range of grinding tools. Plus, with CE certification, you can trust that this motor meets all necessary safety standards.

    Whether you’re working on a small DIY project or a large industrial application, our 1.5KW Water Cooled Spindle Motor is the perfect choice. Don’t settle for anything less than the best – invest in quality and reliability with our spindle motor today!
    #1.5KW #Water #Cooled #Spindle #Motor #220V #Grinding #24000rpm #65mm #ER11 #Collet

  • IRX6  IC Chip Polish Tool Charging CPU NAND Flash Grinding Cutting Remo

    IRX6 IC Chip Polish Tool Charging CPU NAND Flash Grinding Cutting Remo



    IRX6 IC Chip Polish Tool Charging CPU NAND Flash Grinding Cutting Remo

    Price : 2.81

    Ends on : N/A

    View on eBay
    IRX6 IC Chip Polish Tool: The Ultimate Solution for Charging, CPU, NAND Flash Grinding, Cutting, and Removal

    Are you tired of dealing with outdated, ineffective tools when it comes to polishing, grinding, cutting, and removing IC chips? Look no further than the IRX6 IC Chip Polish Tool. This revolutionary tool is designed to meet all your needs when it comes to working with IC chips.

    Whether you need to charge a chip, polish its surface, grind it down to size, cut it for a specific application, or completely remove it from a circuit board, the IRX6 has got you covered. Its advanced technology and precision engineering make it the perfect tool for any professional or hobbyist working with IC chips.

    Say goodbye to the frustration of using multiple tools for different tasks – the IRX6 can do it all. Its versatile design and powerful capabilities make it a must-have for anyone working with IC chips.

    Don’t settle for subpar tools that make your job harder – invest in the IRX6 IC Chip Polish Tool and experience the difference for yourself. Upgrade your workspace today and take your IC chip work to the next level.
    #IRX6 #Chip #Polish #Tool #Charging #CPU #NAND #Flash #Grinding #Cutting #Remo

  • ER32 Grinding Spindle Motor 18000RPM for CNC Router Engraving Machine 220V 4.5KW

    ER32 Grinding Spindle Motor 18000RPM for CNC Router Engraving Machine 220V 4.5KW



    ER32 Grinding Spindle Motor 18000RPM for CNC Router Engraving Machine 220V 4.5KW

    Price : 474.00 – 445.56

    Ends on : N/A

    View on eBay
    Looking to upgrade your CNC router engraving machine? Check out our ER32 Grinding Spindle Motor, capable of reaching speeds up to 18000RPM! This powerful 4.5KW motor is designed to provide precision and efficiency for all your engraving needs.

    With a voltage of 220V, this spindle motor is perfect for professional and industrial use. Its ER32 collet allows for easy and secure tool changes, while its high speed capabilities ensure fast and accurate engraving.

    Don’t settle for anything less than the best when it comes to your CNC router. Upgrade to our ER32 Grinding Spindle Motor today and take your engraving projects to the next level!
    #ER32 #Grinding #Spindle #Motor #18000RPM #CNC #Router #Engraving #Machine #220V #4.5KW

  • Makita 1911K1-3 7″ Dust Extraction Surface Grinding Shroud

    Makita 1911K1-3 7″ Dust Extraction Surface Grinding Shroud


    Price: $86.93 – $87.73
    (as of Dec 21,2024 05:27:48 UTC – Details)



    The Makita 7″ Dust Extraction Surface Grinding Shroud (1911K1-3) is for use with Makita 7” and 9” grinders. The Grinding Shroud features a slidable front cap for flush-to-wall grinding and soft brushes prevent dust from escaping and help move the tool over the surface. It also features a 4-spring suspension system keeps shroud flush with surface during movement, and a removable edge piece allows surface work flush to other objects. It has a standard hose fitting will work with most vacuum systems (OD 1-7/16″), and is Ideal for concrete finishing, concrete material removal and paint or surface coating removal.
    Soft brushes prevent dust from escaping and help move the tool over the surface
    4-spring suspension system keeps shroud flush with surface during movement
    Slidable edge piece allows surface work flush to other objects
    Standard hose fitting will work with most vacuum systems (OD 1-7/16″)
    Ideal for concrete finishing, concrete material removal and paint or surface coating removal


    Introducing the Makita 1911K1-3 7″ Dust Extraction Surface Grinding Shroud – the ultimate tool for a clean and efficient grinding experience!

    This shroud is designed to fit Makita 7″ angle grinders, providing a dust-free grinding environment for both the user and the surrounding area. With a durable construction and easy installation, this shroud is perfect for professional contractors and DIY enthusiasts alike.

    Say goodbye to messy workspaces and harmful dust particles with the Makita 1911K1-3 7″ Dust Extraction Surface Grinding Shroud. Upgrade your grinding experience today! #Makita #GrindingShroud #DustExtraction
    #Makita #1911K13 #Dust #Extraction #Surface #Grinding #Shroud

  • 1.5KW Water Cooled Spindle Motor 24000rpm ER11 220V Grinding High Precision CE

    1.5KW Water Cooled Spindle Motor 24000rpm ER11 220V Grinding High Precision CE



    1.5KW Water Cooled Spindle Motor 24000rpm ER11 220V Grinding High Precision CE

    Price : 104.14

    Ends on : N/A

    View on eBay
    Introducing the 1.5KW Water Cooled Spindle Motor 24000rpm ER11 220V – The Ultimate Tool for High Precision Grinding with CE Certification!

    Are you in need of a powerful and reliable spindle motor for your grinding operations? Look no further than our 1.5KW Water Cooled Spindle Motor. With a maximum speed of 24000rpm and ER11 collet size, this motor is designed to deliver exceptional precision and performance.

    The water cooling system ensures efficient heat dissipation, allowing for continuous operation without the risk of overheating. This motor is also CE certified, guaranteeing its compliance with European safety standards.

    Whether you are working on metal, wood, or other materials, this spindle motor is the perfect tool for achieving high precision results. Don’t settle for anything less than the best – choose our 1.5KW Water Cooled Spindle Motor for all your grinding needs. Order yours today and experience the difference!
    #1.5KW #Water #Cooled #Spindle #Motor #24000rpm #ER11 #220V #Grinding #High #Precision

Chat Icon