Your cart is currently empty!
Tag: L298N
L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module Arduino by Envistia Mall
Price: $6.49
(as of Jan 03,2025 18:02:38 UTC – Details)
This L298N-based driver module is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V.
It can easily control the DC motor speed and direction, and can also control 2-phase stepper motors. It can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays using Pulse Width Modulation (PWM) control.
Two enable inputs are provided to enable or disable the device independently of the input signals.
The motor direction is controlled by sending a HIGH or LOW signal to the drive for each motor (or channel). For example for motor A, a HIGH to IN1 and a LOW to IN2 will cause it to turn in one direction, and a LOW and HIGH will cause it to turn in the other direction.
The module includes an onboard 5V regulator. When enabled by the jumper, the 5V is provided as an output on the power connector, and can be used as a 5V DC supply for your other circuit components. (When enabled, the module input voltage must be at least 6V). When disabled, a separate 5V input provides in order to control the logic level circuitry of this module.
Controller Parameters:- Driver chip: L298N dual H-bridge driver
- Drive Voltage: +5V to +35V (Input voltage must be at least 6V when internal 5V regulator is enabled)
- Drive peak current Io: 2A / Bridge
- Logic power supply range Vss : +4V to +5.5V DC (Not required when internal regulator is enabled. When enabled, the 5V is available as an output on the power connector
- Control signal input voltage range: 4.5-5.5V high 0V low
- Maximum power consumption: 20W
- Storage temperature: -25 ~ +130 C
- Dimensions (approx): 43mm x 43mm x 27mm LxWxH (1.7″ x 1.7″ x 1.1″)
- Weight: 26g
Dual-channel L298N H-bridge driver can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors
Accepts standard TTL logic level inputs to drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V
Uses large-capacity filter capacitors and diodes with freewheeling protection function to increase reliability
Introducing the L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module Arduino, now available at Envistia Mall!This versatile motor drive controller board is perfect for controlling stepper motors with your Arduino projects. With dual H-bridge design, it allows you to control the speed and direction of two motors independently.
The board also features built-in protection diodes, overcurrent protection, and a heat sink for efficient operation. It supports PWM speed control and can drive motors with a voltage range of 5-35V and a current of up to 2A per channel.
Whether you’re building a robot, CNC machine, or any other project that requires precise motor control, the L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module Arduino is the perfect solution. Get yours today at Envistia Mall!
#L298N #Dual #Bridge #PWM #Stepper #Motor #Drive #Controller #Board #Module #Arduino #Envistia #Mall,ai298
L298N Dual H-Bridge Motor Drive Controller for Arduino Smart Car Robot Power Stepper Motor Driver Module
Price: $10.99
(as of Jan 03,2025 17:57:12 UTC – Details)
Product features:
This moduel integrated with one internal 5V power supply, meaning when your driving voltage is 7V-35V,it makes 5V of energy board power supply logically; when 5V of energy board power on, please not input voltage to +5V power supply in interface but you can lead 5V voltage for external usage
Eg: ENA enable IN1 IN2 to control OUT1 OUT2
ENB enable IN3 IN4 to control OUT3 OUT4
Specifications:
Double H bridge Drive Chip: L298N
Logical voltage: 5V
Logical current: 0-36mA
Storage Temperature: -20 to +135
Operating mode: H-bridge driver (dual)
Drive voltage: 5V-35V
Drive current: 2A (MAX single bridge)
Maximum power: 25W
Built-in 5v power supply, when the driving voltage is 7v-35
Usage:
H-Bridge’s are typically used in controlling motors speed and direction, but can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays.
How it works:
An H-Bridge is a circuit that can drive a current in either polarity and be controlled by Pulse Width Modulation (PWM).
*Pulse Width Modulation is a means in controlling the duration of an electronic pulse. In motors try to imagine the brush as a water wheel and electrons as a the flowing droplets of water. The voltage would be the water flowing over the wheel at a constant rate, the more water flowing the higher the voltage. Motors are rated at certain voltages and can be damaged if the voltage is applied to heavily or if it is dropped quickly to slow the motor down. Thus PWM. Take the water wheel analogy and think of the water hitting it in pulses but at a constant flow. The longer the pulses the faster the wheel will turn, the shorter the pulses, the slower the water wheel will turn. Motors will last much longer and be more reliable if controlled through PWM.
Package includes:
1x L298N Module
L298N Dual Motor Controller Module is a neat motor control module based on the L298N H-bridge IC that can allows you to control the speed and direction of two DC motors, or control one bipolar stepper motor with ease
L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value
Well Built Dual-channel H-bridge driver working mode creates higher working efficiency
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
If you’re looking to build a smart car robot or power a stepper motor with your Arduino, the L298N Dual H-Bridge Motor Drive Controller is the perfect module for the job. This versatile and reliable driver module allows you to control two DC motors or one stepper motor with ease.With this module, you can easily control the speed and direction of your motors, making it ideal for robotics projects, RC cars, and more. The L298N module also features built-in protection mechanisms to prevent damage to your motors or Arduino board.
Whether you’re a beginner or an experienced maker, the L298N Dual H-Bridge Motor Drive Controller is a must-have for your projects. Get yours today and start building your next robotics masterpiece!
#L298N #Dual #HBridge #Motor #Drive #Controller #Arduino #Smart #Car #Robot #Power #Stepper #Motor #Driver #Module,ai298
L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module (5 Pack)
Price: $13.89
(as of Jan 03,2025 17:50:45 UTC – Details)
This L298N-based driver module is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V.
It can easily control the DC motor speed and direction, and can also control 2-phase stepper motors. It can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays using Pulse Width Modulation (PWM) control.
Two enable inputs are provided to enable or disable the device independently of the input signals.
The motor direction is controlled by sending a HIGH or LOW signal to the drive for each motor (or channel). For example for motor A, a HIGH to IN1 and a LOW to IN2 will cause it to turn in one direction, and a LOW and HIGH will cause it to turn in the other direction.
The module includes an onboard 5V regulator. When enabled by the jumper, the 5V is provided as an output on the power connector, and can be used as a 5V DC supply for your other circuit components. (When enabled, the module input voltage must be at least 6V). When disabled, a separate 5V input provides in order to control the logic level circuitry of this module.
Controller Parameters:- Driver chip: L298N dual H-bridge driver
- Drive Voltage: +5V to +35V (Input voltage must be at least 6V when internal 5V regulator is enabled)
- Drive peak current Io: 2A / Bridge
- Logic power supply range Vss : +4V to +5.5V DC (Not required when internal regulator is enabled. When enabled, the 5V is available as an output on the power connector
- Control signal input voltage range: 4.5-5.5V high 0V low
- Maximum power consumption: 20W
- Storage temperature: -25 ~ +130 C
- Dimensions (approx): 43mm x 43mm x 27mm LxWxH (1.7″ x 1.7″ x 1.1″)
- Weight: 26g
Dual-channel L298N H-bridge driver can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors
Accepts standard TTL logic level inputs to drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V
Uses large-capacity filter capacitors and diodes with freewheeling protection function to increase reliability
Package of 5 drivers
Introducing the L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module (5 Pack)!Are you looking for a reliable and efficient way to control your stepper motors? Look no further than the L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module. This pack includes 5 modules, perfect for multiple projects or backups.
With its dual H bridge design, this controller board allows you to easily control the speed and direction of your stepper motors with precision. The PWM capability also allows for smooth and accurate motor control, making it ideal for a wide range of applications.
Whether you’re a hobbyist or a professional, the L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module is a must-have tool for your projects. Don’t miss out on this versatile and reliable motor driver – get your pack today!
#L298N #Dual #Bridge #PWM #Stepper #Motor #Drive #Controller #Board #Module #Pack,ai298
L298N Motor Driver Controller Board DC Stepper Motor Dual H-Bridge Module for Arduino Electric Projects Smart Car Robot Power UNO MEGA R3 Mega2560
Price: $10.19
(as of Jan 03,2025 17:44:13 UTC – Details)
- Through this module can use the built-in 78M05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
- If driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits
- The chip manual proposes to support 35V, but according to the book When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven
Logic voltage: 5V ， Logic current: 0mA~36mA ，Storage Temperature: -20 ℃ to +135 ℃ ，Operating mode: H-bridge driver ( Dual ,2 channel ) ，Drive voltage: 5V~35V ，Drive current: 2A ( MAX Single bridge ) ，Maximum power: 25W
Through this module can use the built-in 78M05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
For specific product details and parameter information, please refer to the product description at the bottom of the page. For more information on how to use the product, please refer to the product description.
Please Note that , This is a precision product, Please use with care. You need professional knowledge to use this product. If the product is damaged due to an operating error, it cannot be returned. beg to be excused. All products are factory tested. Tools DIY products. Please understand. Thanks .
If the product has any quality problem , pls contact us by email , How to contact us ? Please click “ AIHJCNELE ”(you can find “Sold by AIHJCNELE ” under Buy Now button), in the new page, click “Ask a question” to email us
Are you looking for a reliable motor driver controller board for your Arduino electric projects? Look no further than the L298N Motor Driver Controller Board DC Stepper Motor Dual H-Bridge Module! This versatile board is perfect for controlling DC motors, stepper motors, and even servo motors with ease.With its dual H-bridge design, the L298N board can drive motors with a voltage range of 5V to 35V and a maximum current of 2A per channel. It is compatible with popular Arduino boards like the UNO, MEGA, and Mega2560, making it a great choice for a wide range of projects.
Whether you are building a smart car, a robot, or any other motorized project, the L298N Motor Driver Controller Board is sure to meet your needs. So why wait? Get yours today and start creating amazing electric projects!
#L298N #Motor #Driver #Controller #Board #Stepper #Motor #Dual #HBridge #Module #Arduino #Electric #Projects #Smart #Car #Robot #Power #UNO #MEGA #Mega2560,ai298
LIONX 2Pack L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Compatible with Ar-duino Electric Projects, Smart Car Robot
Price: $8.99
(as of Jan 03,2025 17:37:48 UTC – Details)
Specification:
- Chip: L298N
- Logic voltage: 5V
- Logic current: 0mA-36mA
- Maximum power: 25W
- Drive voltage: 5V-35V
- Drive current: 2A (For each DC motor)
- Operating mode: Dual H-bridge driver (can drive 2 DC motors)
Reasons to Choose:
- Use of L298N as Main Chip: L298N is a high voltage, high current motor driver chip with features such as a high working voltage (maximum voltage up to 46V), large output current (instantaneous peak current up to 3A), continuous working current of 2A, and rated power of 25W. It has 15 pins in its package and two built-in H-bridge high voltage and large current full bridge drivers, making it suitable for driving DC motors, stepper motors, relay coils, and more. The chip can also be connected to external detecting resistors to provide variations to the control circuit. It is compatible with stepping motors, four-phase stepping motors, and two DC motors using standard logic level signal control.
- Wide Application: PChero L298N Motor Drive Controller Board Module is ideal for Ar-duino, Smart Car, Power UNO, MEGA R3, Mega 2560, and more.
Package Included:
- 2 x L298N Motor Drive Controller Board Module
Package Dimensions : 6 x 4 x 2 inches; 1.6 ounces
Date First Available : October 5, 2022
Manufacturer : LIONX
ASIN : B0BHFCD5HQ
Country of Origin : ChinaDual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
Are you looking for a reliable motor drive controller board for your next electric project or smart car robot? Look no further than the LIONX 2Pack L298N Motor Drive Controller Board Module!This dual H bridge DC stepper controller is compatible with Ar-duino and is perfect for controlling the speed and direction of your motors with ease. Whether you’re building a robot, RC car, or any other electronic project, this controller board is sure to meet your needs.
With a compact design and easy-to-use interface, the LIONX 2Pack L298N Motor Drive Controller Board Module is a must-have for any electronics enthusiast. Don’t let your project be held back by inferior motor control – invest in the best with LIONX!
#LIONX #2Pack #L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Compatible #Arduino #Electric #Projects #Smart #Car #Robot,ai298
L298N L298P 4A Dual Channel Motor Driver Module Motor Shield R3 for Arduino 5V ~ 12V Free Running Stop and Brake Function
Price: $29.62
(as of Jan 03,2025 17:31:26 UTC – Details)
Introducing the L298N L298P 4A Dual Channel Motor Driver Module Motor Shield R3 for Arduino!This motor driver module is perfect for controlling motors with ease. It can handle a wide range of voltages from 5V to 12V, making it versatile for various projects. The dual channel design allows you to control two motors independently, giving you more flexibility in your applications.
One of the standout features of this motor driver module is the free running stop and brake function. This allows you to stop the motor quickly and effectively, ensuring precise control over your motors. Whether you need to stop your motor in an emergency or simply want to have more control over its movements, this feature is incredibly useful.
With easy connectivity to Arduino boards, this motor driver module is perfect for robotics, automation, and other motor control applications. Don’t miss out on the opportunity to take your projects to the next level with the L298N L298P 4A Dual Channel Motor Driver Module Motor Shield R3 for Arduino!
#L298N #L298P #Dual #Channel #Motor #Driver #Module #Motor #Shield #Arduino #12V #Free #Running #Stop #Brake #Function,ai298
8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Electric Projects, Smart Car Robot
Price: $15.99
(as of Jan 03,2025 17:24:40 UTC – Details)
Chip: L298N
Logic voltage: 5V
Logic current 0mA-36mA
Maximum power: 25W
Drive voltage: 5V-35V
Drive current: 2A (for each DC motor)
Operating mode: Dual H-bridge driver (can drive 2 DC motors)
Wide Application:
L298N motor drive controller board module, smart car
Package Included :
8 x L298N motor drive controller board module
10 X Female-Male dupont cables
10 X Female-Female dupont cables
Note:
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4
Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.
Terminal driver part of the supply area VMS: +5V ~ +35V;Drive part of the peak current Io: 2A / Bridge; Logical part of the terminal power supply range Vss :4.5-5 .5V;Logical part of the operating current range: 0 ~ 36mA; The control signal input voltage range: 4.5-5.5V low 0V high;Maximum power consumption: 20W
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage; High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w.
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable.
Are you looking for a motor drive controller board for your electric projects or smart car robot? Look no further! Introducing the 8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor, a versatile and reliable solution for controlling your motors.This controller board features dual H-bridges, allowing you to control the direction and speed of two DC motors or one stepper motor. With its compact size and easy-to-use design, this board is perfect for DIY robotics projects, smart car robots, and more.
Whether you’re a hobbyist, student, or professional, the 8PCS L298N Motor Drive Controller Board is a must-have tool for your electrical and robotics projects. Order yours today and take your creations to the next level!
#8PCS #L298N #Motor #Drive #Controller #Board #Dual #Bridge #Robot #Stepper #Motor #Compatible #Electric #Projects #Smart #Car #Robot,ai298
6PCS L298N Motor Driver Board Module DC Stepper Motor Controller Dual H-Bridge for Smart Car Robot Power
Price: $13.29
(as of Jan 03,2025 16:24:05 UTC – Details)
This module USES L298N as the main drive chip, with strong driving ability, low calorific value and strong anti-interference ability.
Easy to use, No assembly required, Just wire up motors and power. Double H bridge driver working mode make it more high efficient.
Voltage: 5V-35V, drive current: 2A (Max single bridge). This module USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.
Note: Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12V, please use the external power supply 5V logic.
Application: It is used for DIY projects, smart car robot Power and so on. Package Included:6* L298N Motor Driver controller Board Module
If you’re looking to upgrade your smart car or robot’s power and control capabilities, look no further than the 6PCS L298N Motor Driver Board Module DC Stepper Motor Controller Dual H-Bridge. This versatile motor driver board is designed to provide smooth and reliable control over your motors, allowing you to easily navigate your device through various terrains and obstacles.With dual H-bridge design, this motor driver board is capable of controlling two motors independently, giving you the flexibility to create complex movement patterns and maneuvers. Whether you’re building a remote-controlled car, a robotic arm, or a mobile robot, the L298N Motor Driver Board Module is the perfect solution for powering your creations.
Don’t settle for subpar motor control – upgrade to the 6PCS L298N Motor Driver Board Module DC Stepper Motor Controller Dual H-Bridge and take your smart car or robot to the next level!
#6PCS #L298N #Motor #Driver #Board #Module #Stepper #Motor #Controller #Dual #HBridge #Smart #Car #Robot #Power,ai298
L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module (Pack of 2)
Price: $8.79
(as of Jan 03,2025 16:17:32 UTC – Details)
This L298N-based driver module is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V.
It can easily control the DC motor speed and direction, and can also control 2-phase stepper motors. It can be used for other projects such as driving the brightness of certain lighting projects such as high powered LED arrays using Pulse Width Modulation (PWM) control.
Two enable inputs are provided to enable or disable the device independently of the input signals.
The motor direction is controlled by sending a HIGH or LOW signal to the drive for each motor (or channel). For example for motor A, a HIGH to IN1 and a LOW to IN2 will cause it to turn in one direction, and a LOW and HIGH will cause it to turn in the other direction.
The module includes an onboard 5V regulator. When enabled by the jumper, the 5V is provided as an output on the power connector, and can be used as a 5V DC supply for your other circuit components. (When enabled, the module input voltage must be at least 6V). When disabled, a separate 5V input provides in order to control the logic level circuitry of this module.
Controller Parameters:- Driver chip: L298N dual H-bridge driver
- Drive Voltage: +5V to +35V (Input voltage must be at least 6V when internal 5V regulator is enabled)
- Drive peak current Io: 2A / Bridge
- Logic power supply range Vss : +4V to +5.5V DC (Not required when internal regulator is enabled. When enabled, the 5V is available as an output on the power connector
- Control signal input voltage range: 4.5-5.5V high 0V low
- Maximum power consumption: 20W
- Storage temperature: -25 ~ +130 C
- Dimensions (approx): 43mm x 43mm x 27mm LxWxH (1.7″ x 1.7″ x 1.1″)
- Weight: 26g
Dual-channel L298N H-bridge driver can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors
Accepts standard TTL logic level inputs to drive inductive loads such as relays, solenoids, DC and stepping motors from 5V to 35V
Uses large-capacity filter capacitors and diodes with freewheeling protection function to increase reliability
Package of 2 drivers
Introducing the L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Module – Pack of 2!Looking to control your stepper motors with ease and precision? Look no further than this pack of 2 L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Modules. With built-in dual H-bridge driver chip L298N, this module allows you to easily control the speed and direction of your stepper motors with PWM signal.
This controller board module is perfect for DIY projects, robotics, 3D printers, CNC machines, and more. Its compact size and easy wiring make it a convenient choice for any project requiring precise motor control.
Don’t miss out on this pack of 2 L298N Dual H Bridge PWM Stepper Motor Drive Controller Board Modules – order yours today and take your projects to the next level!
#L298N #Dual #Bridge #PWM #Stepper #Motor #Drive #Controller #Board #Module #Pack,ai298
2 PCS L298N Motor DC Stepper Motor Driver Controller Board Module Dual H Bridge for Arduino
Price: $6.95
(as of Jan 03,2025 16:10:02 UTC – Details)
Specification:
Chip: L298N dual H-bridge driver chip
Logic voltage: 5V
Logic current： 0mA-36mA
Working mode: H-bridge driver (dual)
Storage Temperature: -20 ℃ to +135 ℃
Operating mode: H-bridge driver (dual)
Drive voltage: 5V-35V
Drive current: 2A (MAX single bridge)
Maximum power: 25W
Driver Board Size：55mm*60mm*30mm
Driver Board Weight: 33g/pcs
Dimensions: 43x43x27mm-Low heat generation and excellent anti-interference performance.
-With power up to 25w, i.e. 2A, it can run one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
-The larger capacity makes the capacitor impregnation behind the over current protection diode more stable and reliable.
-This module can complete the electrical work of 78M05 by driving the power supply part. To prevent damage to the voltage regulator chip, please use an external 5V logic power supply when using a driving voltage higher than 12V.
Warm Tips:
-When driver voltage: 7V-12V:
The on-board 5V logic power supply can be enabled, when using the on-board 5V power supply, the +5V power supply in the interface does not input voltage, but can draw 5V voltage for external use.-When the drive voltage is greater than 12V, less than or equal to 24V:
For example, to drive a motor rated at 18V, the jumper cap enabling the on-board voltage 5V output must be removed, and then 5V must be connected outside the 5V output port to the L298N internal logic voltage supply.Package Included:
2 X DC L298N Motor Driver controller Board Module
Package Dimensions : 4.65 x 3.07 x 1.3 inches; 2.08 ounces
Date First Available : October 27, 2023
Manufacturer : VKLSVAN
ASIN : B0CLYBPGP9【High Quality Chip】L298N as main driver chip, strong driving ability/small heating/strong anti-interference/low calorific value,can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
【High Efficiency】Dual-channel H-bridge driver working mode creates higher working efficiency.
【High Reliability】Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
【Main Parameters】Drive voltage: 5V-35V, Drive current: 2A (MAX single bridge),Maximum power: 25W, Logic current 0mA-36mA,Operating mode: H-bridge driver (dual).
【Warm Tips】To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
Are you looking for a reliable motor driver controller board for your Arduino projects? Look no further than the 2 PCS L298N Motor DC Stepper Motor Driver Controller Board Module Dual H Bridge!This versatile board is perfect for controlling DC motors, stepper motors, and even servo motors with ease. With dual H-bridge circuits, you can drive two motors simultaneously with up to 2A per channel. The built-in heat sink ensures stable performance even under heavy loads.
Whether you’re building a robot, a CNC machine, or a custom motorized project, the L298N Motor Driver Board is a must-have tool in your arsenal. Get yours today and take your Arduino projects to the next level!
#PCS #L298N #Motor #Stepper #Motor #Driver #Controller #Board #Module #Dual #Bridge #Arduino,ai298
