Zion Tech Group

Tag: L298N

6pcs L298N Motor Driver Controller Board Module DC Stepper Motor Dual H-Bridge for Arduino

Price: $12.99
(as of Jan 03,2025 16:02:25 UTC – Details)

Specification:
Chip: ST L298N dual H-bridge driver chip
Logic Voltage: 5V
Logic current 0mA-36mA
Storage Temperature: -20 ¡æ to +135 ¡æ
Operating Mode: H-bridge driver (dual)
Drive Voltage: 5V-35V
Drive Current: 2A (MAX single bridge)
Maximum Power: 25W
Driver Board Size：55mm*60mm*30mm
Driver Board Weight:33g
Dimensions: 43x43x27mm

Note:
When your driver is 7V-12V, you can enable the on-board 5V logic supply. When using the on-board 5V power supply, the + 5V power supply in the interface does not input voltage, but it can draw 5V voltage for external use.

When the driving voltage is higher than 12V, less than or equal to 24V, for example, to drive a motor with rated voltage of 18V, the jumper cap with 5V output enabled on-board voltage must be pulled out and then outside the 5V output port Connect 5V voltage to L298N internal logic voltage supply.
★High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
★L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value.
★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
★Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.

Introducing the 6pcs L298N Motor Driver Controller Board Module DC Stepper Motor Dual H-Bridge for Arduino!

Are you looking for a reliable and efficient motor driver controller board for your Arduino projects? Look no further than the 6pcs L298N Motor Driver Controller Board Module. This set includes 6 pieces of high-quality L298N motor driver boards, perfect for driving DC motors and stepper motors with ease.

The L298N features dual H-bridge technology, allowing you to control the speed and direction of two motors independently. With a maximum current rating of 2A per channel and a voltage range of 5V-35V, this motor driver board is versatile and powerful enough to handle a wide range of motor types.

Whether you’re building a robot, a CNC machine, or any other motor-controlled project, the 6pcs L298N Motor Driver Controller Board Module is the perfect choice. Easy to use and compatible with Arduino, this motor driver board will help you take your projects to the next level.

Don’t miss out on this great deal – order your 6pcs L298N Motor Driver Controller Board Module today and start creating amazing motor-controlled projects!
#6pcs #L298N #Motor #Driver #Controller #Board #Module #Stepper #Motor #Dual #HBridge #Arduino,ai298

January 3, 2025
L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino Smart Car Robot R3 2560 ESP32 ESP826

Price: $6.49
(as of Jan 03,2025 15:55:56 UTC – Details)

Description:
L298N as main chip,low heat,outstanding anti-interference performance
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w
Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors
Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply
Large capacity filter capacitance,afterflow protection diode, more stable and reliable

Customers say

Customers find the product functional and of good quality for its price. They mention it works well for Raspberry Pi projects and small tracked robot projects.

AI-generated from the text of customer reviews

Are you looking to control motors for your Arduino smart car or robot project? Look no further than the L298N Motor Drive Controller Board Module! This dual H bridge DC stepper motor driver is perfect for driving two motors independently, making it ideal for projects that require precise control and movement.

With compatibility with Arduino R3, 2560, ESP32, and ESP8266, this controller board is versatile and easy to use. It also features onboard voltage regulation, allowing you to power your motors and control circuits with ease.

Whether you’re a beginner looking to add motion to your project or an experienced maker wanting more control over your motors, the L298N Motor Drive Controller Board Module is a must-have component. Get yours today and start building your next robotic creation!
#L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Arduino #Smart #Car #Robot #ESP32 #ESP826,ai298

January 3, 2025
2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Price: $8.99
(as of Jan 03,2025 15:49:26 UTC – Details)

Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.

Customers say

Customers find the single board computer functional and easy to use. They find it simple to set up and control with arduino. Many consider it a good product that lasts well. However, some have issues with heat levels and voltage drops. There are mixed opinions on value for money and size.

AI-generated from the text of customer reviews

Introducing the 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino!

Are you looking for a reliable and versatile motor drive controller board for your Arduino projects? Look no further than the 2Packs L298N Motor Drive Controller Board Module. This dual H bridge DC stepper motor drive controller board is perfect for controlling motors with ease and precision.

Whether you’re building a robot, a CNC machine, or any other project that requires motor control, this board is sure to meet your needs. It can drive up to 2 DC motors or one stepper motor, making it perfect for a wide range of applications.

The L298N chip on this board provides high efficiency and low heat generation, ensuring smooth and reliable operation. With built-in protection diodes, you can rest assured that your motors are safe from reverse polarity and voltage spikes.

Don’t let motor control be a headache in your projects. Grab a 2Packs L298N Motor Drive Controller Board Module today and take your Arduino projects to the next level!
#2Packs #L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Arduino,ai298

January 3, 2025
DEVMO 10 Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Compatible with Ar-duino Electric Projects, Smart Car Robot

Price: $24.99
(as of Jan 03,2025 15:43:03 UTC – Details)

Specification:

Chip: L298N
Logic voltage: 5V
Logic current 0mA-36mA
Maximum power: 25W
Drive voltage: 5V-35V
Drive current: 2A(For each DC motor)
Operating mode: Dual H-bridge driver (can drive 2 DC motors)

Reason 1: Use L298N for Main Chip

L298N is a kind of high voltage, high current motor driver chip. Features as high working voltage (maximum voltage up to 46V), large output current (instantaneous peak current up to 3A), continuous working current 2A and 25W of rated power. Having 15 pins as package.
Two built-in H Birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on.
The chip can connects to external detecting resistor to give the variations to the control circuit.
Using L298N Chip to drive the motor, the chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal, which enables the internal logic circuit part works at low voltage.

Reason 2: Wide Application

PChero L298N Motor Drive Controller Board Module is ideal for Ar-duino, Smart Car, Power UNO, MEGA R3, Mega 2560, etc.

Package Included :

10 x L298N Motor Drive Controller Board Module.
Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.

Are you looking for a reliable motor drive controller board for your electric projects or smart car robot? Look no further than the DEVMO 10 Packs L298N Motor Drive Controller Board Module!

This dual H bridge DC stepper controller is compatible with Ar-duino and is perfect for controlling motors in a variety of projects. Whether you’re building a robot, a RC car, or any other motorized device, this controller board is perfect for the job.

With 10 packs included, you’ll have plenty of controllers on hand for all your projects. Plus, the L298N chip on board ensures reliable and efficient motor control.

Don’t let your projects stall due to inadequate motor control. Get your hands on the DEVMO 10 Packs L298N Motor Drive Controller Board Module today and take your electric projects to the next level!
#DEVMO #Packs #L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Compatible #Arduino #Electric #Projects #Smart #Car #Robot,ai298

January 3, 2025
2Pack L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Compatible with Ar-duino Electric Projects, Smart Car Robot ESP32 ESP826 LIONX

Price: $8.99
(as of Jan 03,2025 15:35:18 UTC – Details)

Enhance the performance of your electric projects, smart cars, and robots with the 2Pack L298N Motor Drive Controller Board Module. Designed with technology and features, this module is the ideal solution for driving motors efficiently. Whether you’re a hobbyist, a DIY enthusiast, or an experienced engineer, this module offers versatility in one package.
Featuring a dual-channel H-bridge driver working mode, the L298N chip, which serves as the main component, ensures higher efficiency and smoother motor operation. With the capability to drive one 2-phase stepper motor, one 4-phase stepper motor, or two DC motors, this module offers flexibility.
To guarantee optimal performance and protect the voltage stabilizing chip, it is recommended to utilize an external 5V logic supply when using a driving voltage higher than 12V. This precautionary measure safeguards your module and ensures its longevity.
Thanks to its large-capacity filter capacitors and diode with freewheeling protection function, the 2Pack L298N Motor Drive Controller Board Module boasts increased. Say goodbye to unexpected voltage spikes and protect your valuable equipment effectively.
With a high working power of up to 46V and a large current capacity of 3A MAX (2A continuous current), this module delivers performance. Its power rating of 25W enables it to handle demanding applications with ease, making it a choice for various projects.
The module’s design incorporates a large capacity filter capacitance and an afterflow protection diode, contributing to its stability and dependability. Experience seamless motor control and enjoy peace of mind knowing that your projects are in safe hands.
EFFICIENCY: Dual-channel H-bridge driver working mode ensures higher efficiency and smoother motor operation.
COMPATIBILITY: Compatible with Arduino, smart cars, Power UNO, MEGA R3, Mega 2560, and more.
ENHANCED PROTECTION: Utilize an external 5V logic supply for driving voltages higher than 12V to protect the voltage stabilizing chip.
PERFORMANCE: Equipped with large-capacity filter capacitors and diode with freewheeling protection function for increased reliability.
OPERATION: Handles up to 46V working power, 3A MAX current, and 25W power rating for demanding applications.

Are you looking for a reliable motor drive controller board for your electric projects or smart car robot? Look no further than the 2Pack L298N Motor Drive Controller Board Module! This dual H bridge DC stepper controller is compatible with Ar-duino, ESP32, ESP826, and LIONX, making it the perfect choice for a variety of applications.

With this controller board, you can easily control the speed and direction of your motors, making it ideal for robotics, automation, and other DIY projects. Its compact size and easy-to-use design make it a great choice for beginners and experienced hobbyists alike.

Don’t let your projects get held back by inferior motor controllers. Upgrade to the 2Pack L298N Motor Drive Controller Board Module and take your creations to the next level!
#2Pack #L298N #Motor #Drive #Controller #Board #Module #Dual #Bridge #Stepper #Compatible #Arduino #Electric #Projects #Smart #Car #Robot #ESP32 #ESP826 #LIONX,ai298

January 3, 2025
L298N Motor Driver Controller Board – DC Dual H-Bridge Stepper Motor Controller Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 with 4pcs

Price: $12.49
(as of Jan 03,2025 15:25:40 UTC – Details)

High-quality Driver Chip: L298N is an acceptable high-voltage, high-current dual-channel full-bridge motor driver chip, the operating voltage up to 46V, the output current up to 4A. In addition, the chip also has a low heat generation, anti-interference ability, strong driving ability
Easy to Use: L298N can realize the forward, reverse and stop of the motor by controlling the I/O inputs on the main control chip and adjusting the output voltage directly through the power supply
Stable and Reliable: This module uses large-capacity filter capacitors and current-continuing protection diodes, which can improve reliability
Perfect Small Dual H-bridge Board: Dual-channel h-bridge driver operating mode, higher working efficiency
Note: When using a drive voltage greater than 12V, please use an external 5V logic power supply to avoid damaging the chip

The L298N Motor Driver Controller Board is a versatile and powerful tool for controlling DC motors and stepper motors with ease. This dual H-Bridge module is designed specifically for use with Arduino microcontrollers, making it perfect for smart car projects, robotics, and other DIY electronics projects.

With the L298N Motor Driver Controller Board, you can easily control the speed and direction of two DC motors or one stepper motor. The module features four high-power H-Bridge driver circuits that can handle up to 2A per channel, allowing you to drive a wide range of motors with ease.

This module is compatible with a variety of Arduino boards, including the UNO, MEGA, R3, and Mega2560. It can be easily connected to your Arduino board using jumper wires, making it simple to integrate into your projects.

With the L298N Motor Driver Controller Board, you can create custom motor control systems for your Arduino projects, whether you’re building a robot, a smart car, or any other motorized project. Its compact size and easy-to-use design make it a great choice for beginners and experienced makers alike.

Get your hands on the L298N Motor Driver Controller Board today and start building your next Arduino project with ease!
#L298N #Motor #Driver #Controller #Board #Dual #HBridge #Stepper #Motor #Controller #Module #Arduino #Smart #Car #Power #UNO #MEGA #Mega2560 #4pcs,ai298

January 3, 2025
5Pcs Dual H-Bridge DC Stepper Motor Replace L298N Mini 1.5A 2 Way DC Motor Driver Module Forward and Reverse PWM Speed

Price: $7.99
(as of Jan 03,2025 15:16:57 UTC – Details)

Product parameters
Module power supply voltage: 2V-10V
Signal input voltage: 1.8-7V
Single circuit working current: 1.5A
Peak current: up to 2.5A
Low standby current: less than 0.1uA
Product size: 24.7 * 21 * 5mm/0.97*0.83*0.20in (L*W*H)
Installation hole diameter: 2mm/0.08in

Features
Built-in anti-common state conduction circuit, the motor will not malfunction when the input end is suspended
Equipped with a built-in overheat protection circuit (TSD) with a hysteresis effect, there is no need to worry about motor stalling
Dual H-bridge motor drive, capable of simultaneously driving two DC motors or one 4-wire two-phase stepper motor
Adopting imported original professional motor driver chips, with built-in low conductivity and internal resistance MOS switch tubes
With minimal heat generation, no need for heat dissipation fins, small size, and low power consumption, it is an ideal choice for your battery power supply
Built-in overheat protection circuit, there is no need to worry about the motor being blocked or burnt out. It automatically recovers after the temperature drops
Small size, lightweight, and low standby current is the ideal choice for car module
Replace L298N very well
Suitable for battery-powered smart cars, toy cars, robots, etc

Precautions
The reverse connection between the positive and negative poles of the power supply will definitely cause circuit damage
In the case of a short circuit to the ground or output terminal, as well as motor blockage, the chip will be thermally protected. However, it can also cause chip burnout when the voltage is close to or exceeds 10V and the peak current greatly exceeds 2.5A
Module power supply voltage 2V-10V; Signal input voltage 1.8-7V; Single circuit working current 1.5A, peak current up to 2.5A
Dual H-bridge motor driver, can drive two DC motors or one 4-wire two-phase stepper motor
Adopting original motor driver chips, with built-in low conductivity and internal resistance MOS switch tubes, the heating is minimal
Built-in overheat protection circuit, there is no need to worry about the motor being blocked or burnt out. It automatically recovers after the temperature drops
Small size, light weight, low standby current (less than 0.1uA), ideal for your car model

Are you looking for a reliable and efficient motor driver module for your stepper motor projects? Look no further than the 5Pcs Dual H-Bridge DC Stepper Motor Replace L298N Mini 1.5A 2 Way DC Motor Driver Module! This module is designed to provide seamless control for your stepper motors, allowing you to easily control the direction and speed of your motors with PWM signals.

With dual H-bridge functionality, this module can handle up to 1.5A of current, making it perfect for a wide range of stepper motor applications. Whether you need to control the forward and reverse movement of your motors or adjust the speed with precision, this module has got you covered.

Say goodbye to the bulky and outdated L298N motor drivers – the 5Pcs Dual H-Bridge DC Stepper Motor Replace module is compact, efficient, and easy to use. Upgrade your stepper motor projects today and experience smoother and more precise motor control like never before.

Get your hands on the 5Pcs Dual H-Bridge DC Stepper Motor Replace L298N Mini 1.5A 2 Way DC Motor Driver Module and take your projects to the next level!
#5Pcs #Dual #HBridge #Stepper #Motor #Replace #L298N #Mini #1.5A #Motor #Driver #Module #Reverse #PWM #Speed,ai298

January 3, 2025
L298N H Bridge Stepper Motor Driver Module DC Motors Drivers Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560 (Pack of 2pcs)

Price: $7.99
(as of Jan 03,2025 15:06:06 UTC – Details)

JTAREA L298N Dual-channel H-bridge Motor Driver – Create Higher Working Efficiency.
POWER SUPPLY: 5 V~35 V; PEAK CURRENT: 2 Amp.
CIRCUIT CHARACTERISTICS: Dual h-bridge motor driver integrated circuit – relaxed and independent – control two motors.
EXCELLENT FEATURES: H-bridge drive working mode lays the foundation for higher work efficiency. No assembly required, ready to use.
PACKAGE: Use a static bag – for protection and packaged in a box – for easy storage.

Looking for a reliable H-bridge stepper motor driver module for your Arduino smart car project? Look no further than the L298N H Bridge Stepper Motor Driver Module! This pack includes 2pcs of the dual H-bridge drivers, perfect for controlling DC motors with ease.

Whether you’re working on a small-scale project or a larger build, the L298N H Bridge Stepper Motor Driver Module is compatible with popular Arduino boards like the UNO, MEGA, and Mega2560. With its high efficiency and low heat generation, this driver module is ideal for powering your smart car or robotics project.

Don’t let your motors go uncontrolled – grab a pack of the L298N H Bridge Stepper Motor Driver Module today and take your projects to the next level!
#L298N #Bridge #Stepper #Motor #Driver #Module #Motors #Drivers #Dual #HBridge #Arduino #Smart #Car #Power #UNO #MEGA #Mega2560 #Pack #2pcs,ai298

January 3, 2025
12pcs L298N Motor Drive Controller Board Module Stepper Motor DC Dual H Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560 with Jumper Wires

Price: $22.99
(as of Jan 03,2025 14:55:14 UTC – Details)

Specification:
Chip: L298N
Logic Voltage: 5V
Logic Current: 0mA-36mA
Storage Temperature: -20℃ to+135℃
Operating Mode: H-bridge driver (dual)
Drive Voltage: 5V-35V
Drive Current: 2A (MAX single bridge)
Maximum Power: 25W
Dimensions: 43x43x27mm

Note:
1. General Application: When your driver is 7V-12V, you can enable the on-board 5V logic supply.
2. When using the on-board 5V power supply, the + 5V power supply in the interface does not input voltage, but it can draw 5V voltage for external use.
3. Unconventional application of high-voltage drive: When the driving voltage is higher than 12V, less than or equal to 24V, for example, to drive a motor with rated voltage of 18V, the jumper cap with 5V output enabled on-board voltage must be pulled out and then outside the 5V output port Connect 5V voltage to L298N internal logic voltage supply.

Package Included:
12* L298N Motor Driver Controller Board Module
1* Jumper Wire Set
L298N Motor Driver: L298N as the main driver chip, the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage.
High efficient: dual-channel H-bridge driver design, can directly drive two 3-30V DC motor, or one 2-phase stepper motor, one 4-phase stepper motor, working power up to 35v, high current can reach 3A MAX, continuous current is 2A, power up to 25w, which created higher efficiency.
Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability.
Package content: you will get 12pcs L298N motor drive controller board with dupont wire.

Looking for a reliable motor drive controller board module for your Arduino smart car project? Look no further than the 12pcs L298N Motor Drive Controller Board Module! This versatile board is perfect for controlling stepper motors and DC motors with its dual H-bridge design.

With compatibility with popular Arduino boards like UNO, MEGA, and Mega2560, this controller board is easy to integrate into your existing projects. It also comes with jumper wires for quick and easy connections, making installation a breeze.

Whether you’re a beginner looking to learn more about motor control or a seasoned maker looking for a reliable solution, the L298N Motor Drive Controller Board Module is a must-have for your workshop. Get your hands on a 12pcs pack today and take your Arduino projects to the next level!
#12pcs #L298N #Motor #Drive #Controller #Board #Module #Stepper #Motor #Dual #Bridge #Arduino #Smart #Car #Power #UNO #MEGA #Mega2560 #Jumper #Wires,ai298

January 3, 2025
Aideepen 5pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H Bridge for Arduin0 Smart Car Power UN0 MEGA R3 Mega256O

Price: ~~$12.99~~ – $11.99
(as of Jan 03,2025 14:44:28 UTC – Details)

From the brand

How did we get our start?

In 2009, an electronic lover began to produce/sell and share various products with two engineers in Shenzhen. Aideepen was established.

What keeps us going?

We have been committed to becoming an expert in this field, constantly developing until build own factory and R&D team,and expanding the team to more than 200 employees.

How do we do, if there’s some issue with product?

Each product you purchase from Aideepen have 24 months service. You can get a new replacement if there’s any quality issue with your items.

Floor Price !!!

ESP32

Aideepen Transistor Meter

Aideepen Servo Motor

ST L298N main driver chip makes strong driving ability, low heating, strong anti-interference and low calorific value
Large capacity filter capacitance, afterflow protection diode, more stable and reliable
Dual-channel H-bridge driver working mode will make your work more efficient
High working power to 46v, large current can reach 3A max and continue current is 2A, power to 25w
Built-in 78M05, get power from drive power

Customers say

Customers appreciate the product’s functionality, value for money, ease of use, and compact size. They find it works well for driving motors, is easy to set up, and offers good quality at a reasonable price. The board is described as a great little breakout board that is working well for them.

AI-generated from the text of customer reviews

Are you looking to upgrade your Arduino smart car project? Look no further than the Aideepen 5pcs L298N Motor Driver Controller Board Module! This board features a dual H-bridge design, making it perfect for controlling stepper motors and DC motors with ease.

Whether you’re working on a small-scale project with an Arduino UNO or a more complex build with a MEGA R3 or Mega2560, this motor driver controller board is sure to meet your needs. Its compact size and easy-to-use design make it ideal for hobbyists and professionals alike.

Don’t let motor control hold you back – upgrade to the Aideepen L298N Motor Driver Controller Board Module today and take your Arduino smart car project to the next level!
#Aideepen #5pcs #L298N #Motor #Driver #Controller #Board #Module #Stepper #Motor #Dual #Bridge #Arduin0 #Smart #Car #Power #UN0 #MEGA #Mega256O,ai298

January 3, 2025

Hello, how can I help you today?

Gathering thoughts.. ...