Zion Tech Group

Tag: Replaces

  • Utah Hockey Club replaces Wasatch for Outlaws in fan name vote


    One day after announcing three finalists for their permanent nickname, the Utah Hockey Club has replaced one of them.

    Wasatch, named for the Wasatch mountain range in Utah, has been swapped out with Outlaws, the team announced on Thursday. It will join Hockey Club and Mammoth, which made the final four after an initial fan vote last year, as the three options fans will be able to vote on during the team’s current four-game homestand.

    “We listened to your feedback and dug into all the Qualtrics data from last night’s survey,” the team said in a statement Thursday. “For the team name, it’s clear that Outlaws should be in the mix instead of Wasatch, so we’re swapping it out.”

    Yeti had been a favorite option and was part of the voting process since the beginning, but a trademark issue caused the team to drop it from consideration.

    Mike Maughan, an executive of the team’s parent company Smith Entertainment Group, confirmed to reporters this week that the team would pivot to a different selection of possible names after the U.S. Patent and Trademark Office rejected the Yeti name and logo it submitted for approval.

    The USPTO specifically cited a “likelihood of confusion” for consumers due to other companies and brands with a similar name, most notably the Yeti Cooler Company. Different companies can feature a similar name if they’re in clearly different fields (e.g. the Beatles’ Apple Corps and Apple Computers), but it seems likely an NHL team with the same name would clash with certain products, such as the cooler company’s apparel line.

    Maughan said the team is confident that the winner of the fan vote will clear the patent and trademark process.

    The team is planning to have a permanent name and home and away jerseys in place in time for the start of the 2025-26 NHL season.





    The Utah Hockey Club, formerly known as the Wasatch Outlaws, recently held a fan vote to determine a new name for the team. After receiving numerous suggestions and conducting a thorough review, the team announced that they will now be known as the Utah Outlaws.

    The decision to change the team name was made in an effort to better represent the state of Utah and its passionate hockey fanbase. The Utah Outlaws will continue to bring high-energy, competitive hockey to the ice, and fans can expect the same level of excitement and dedication from the team as they have come to know and love.

    We are thrilled to introduce the Utah Outlaws as the new name for our beloved hockey team and look forward to the continued support from our amazing fans. Thank you to everyone who participated in the fan vote and helped us choose a new name that truly represents the spirit of Utah hockey. Go Outlaws! #UtahOutlaws #HockeyClub #FanVote

    Tags:

    1. Utah hockey club
    2. Outlaws fan name
    3. Utah hockey team
    4. Wasatch Outlaws
    5. Utah sports news
    6. Hockey fan vote
    7. Utah sports team
    8. Utah hockey fans
    9. Outlaws fan vote
    10. Utah hockey club news

    #Utah #Hockey #Club #replaces #Wasatch #Outlaws #fan #vote

  • HumanCentric VESA Mount Adapter Compatible with iMac 24 Inch (Aluminum), iMac 27 Inch (2009, 2010, 2011), LED Cinema Display, Thunderbolt Displays, Replaces Apple iMac VESA Adapter MD179ZM/A


    Price: $29.98
    (as of Jan 31,2025 19:56:21 UTC – Details)



    To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.Learn more how customers reviews work on Amazon





Review this product

Share your thoughts with other customers
Write a customer review

Customers say

Customers find the product easy to install with clear instructions. They say it works well and is a solid product. The design looks nice and fits snugly yet protectively. Customers also appreciate the tool kit. However, opinions differ on the mount and screw length.

AI-generated from the text of customer reviews

Select to learn more
Ease of installationFunctionalityBuild qualityDesignFitTool kitMountScrew length
94 customers mention "Ease of installation"84 positive10 negative

Customers find the installation process straightforward. They follow the included instructions and find it works as advertised. The cable is easy to add or remove to the display, with clear instructions and all the necessary screws and tools.

"…of machined aluminum and came with all the right screws and tools to get the job done…." Read more
"…expecting it to be well designed, well made, well packaged, clear instructions, and people of integrity standing behind it. Thank you HumanCentric…." Read more
"…I have seen a lot of posts about it. Fortunately it's easy enough to bootleg things back. Hopefully this review helps someone. Two approaches…." Read more
"…TL;DR – Great product. Easy instructions and preparation. Once installed everything works perfectly and looks awesome mounted on the wall swing arm." Read more
90 customers mention "Functionality"84 positive6 negative

Customers are satisfied with the product's functionality. They mention it works well, is sturdy, and solidly built. The mount works as advertised and gets the job done.

"…This VESA adapter worked perfectly, is made of machined aluminum and came with all the right screws and tools to get the job done…." Read more
"So this product is great. Used was just fine. Straight forward if the monitor stand releases right…." Read more
"…Easy instructions and preparation. Once installed everything works perfectly and looks awesome mounted on the wall swing arm." Read more
"The mount works as advertised, and seems very sturdy and solidly built…." Read more
84 customers mention "Build quality"78 positive6 negative

Customers appreciate the solid build quality of the product. They find it easy to install and a better-engineered solution than the Apple original. The product holds the display securely, providing a proper posture and neck break. Overall, customers consider it a great product for the price and worth the purchase.

"…Their mount is well-built and comes with everything you need to arm-mount your old Apple Display, even the card tool to remove your factory stand!…" Read more
"So this product is great. Used was just fine. Straight forward if the monitor stand releases right…." Read more
"The mount works as advertised, and seems very sturdy and solidly built…." Read more
"…Held the display well. No concern about stability. Easy enough to add/remove to the display." Read more
26 customers mention "Design"19 positive7 negative

Customers like the design. They mention it fits well, has a nice appearance, and is well-suited to Thunderbolt displays. The instructions are clear and the build quality is good.

"…not hesitate to buy any product they offered expecting it to be well designed, well made, well packaged, clear instructions, and people of integrity…" Read more
"…Once installed everything works perfectly and looks awesome mounted on the wall swing arm." Read more
"…What stinks is Apple's garbage hinge design. It is very easy to release the monitor stand hinge and have it retract inside the monitor…." Read more
"…my case, I use it as a document monitor in portrait, and man does it look sharp!…" Read more
24 customers mention "Fit"20 positive4 negative

Customers like the fit of the product. They say it adapts their computer to fit the wall mount, and it fits snugly yet protectively. The screw holes align perfectly with some monitors, while others did not. Overall, customers are satisfied with the fit and alignment.

"I mean, it all fits and screws together, but the VESA bracket doesn’t touch the adapter piece screwed in the monitor…." Read more
"…This one fit perfectly, and even comes with soft plastic covers where the mount meets the back of the monitor for a snug yet protective fit…." Read more
"…picture I have iMac and apple cinema 24 and both were mounted using the same kit perfectly. I recommend this product definitely." Read more
"…Perfect fit for my 27" Apple Thunderbolt monitor…." Read more
20 customers mention "Tool kit"20 positive0 negative

Customers appreciate the tool kit. It includes all the tools needed to remove the old stand and install a Vesa mount. They mention it's easy to install, comes with all the necessary tools and screws, and a clear installation instruction sheet. The mount is well-built and comes with everything you need to arm-mount your old Apple Display, including the plastic card and tool to remove the base.

"…adapter worked perfectly, is made of machined aluminum and came with all the right screws and tools to get the job done…." Read more
"…Their mount is well-built and comes with everything you need to arm-mount your old Apple Display, even the card tool to remove your factory stand!…" Read more
"…It came with all the tools necessary, and was a simple installation process; only took me about 15 minutes total…." Read more
"Very easy to mount, everything you need included, even the 4 screws and shims for the VESA mount…." Read more
24 customers mention "Mount"15 positive9 negative

Customers have mixed opinions about the mount. Some say it works well and securely mounts their monitors. Others mention that the hardware mounts differently, and the mount is not flush with the flange.

"…The gap didn't seem to be an issue and the monitor is securely mounted now." Read more
"…After that, this mount is great. 10 minutes to install, 2.5 hours messing with Apples stupid stand hinge." Read more
"…if they included guidance on what to do if your mounting bracket doesn't stay exposed." Read more
"Perfect mounting solution…." Read more
20 customers mention "Screw length"7 positive13 negative

Customers have different views on the screw length. Some say the screws are the right ones to attach the mount, and they tighten properly. Others mention issues with the smaller screw holes not being threaded properly, short screws, or stripped screws.

"…And the bolts provided are too short to cover all this room between the monitor’s body and the mount…." Read more
"…The screws does tighten, and it’s not like I’m going to be swinging this thing around, but just seems odd, hence minus 1 star…." Read more
"…2. One of the vesa plate’s screw is very lose. I concern about the build quality. 3. Like others mentioned…." Read more
"…Plus, the screw does not penetrate in a lot so I'm not sure if there will be any issue with that in terms of sturdiness…." Read more





Exactly what you need to arm-mount your Apple Display

5 out of 5 stars

Exactly what you need to arm-mount your Apple Display
A few years ago I bought some USB-powered Video meeting LED lights from HumanCentric. The controller failed and HumanCentric quickly acknowledged the known issue and quickly mailed me an updated controller. I still use the lights to this day!For this reason I did not hesitate to buy another product from them. Their mount is well-built and comes with everything you need to arm-mount your old Apple Display, even the card tool to remove your factory stand! Took me less than 10 minutes! I am very happy and would not hesitate to buy any product they offered expecting it to be well designed, well made, well packaged, clear instructions, and people of integrity standing behind it. Thank you HumanCentric. Perfect!
Hide

Thank you for your feedback

Sorry, there was an error

Sorry we couldn't load the review






Top reviews from the United States



  • Joseph Preston

    5.0 out of 5 stars

    Worked great for A1407 Thunderbolt Display

    Reviewed in the United States on November 12, 2024

    Verified Purchase

    I have a mid-2011 Thunderbolt display and wanted to mount on a monitor arm. This VESA adapter worked perfectly, is made of machined aluminum and came with all the right screws and tools to get the job done. They even included a special bent piece of plastic to properly unlock the stand so you can reveal the attachment screws to remove the stand and attach the mount.

    Read their instructions because for my mounting setup, there was about a 3/8" gap between the mounting block and the plate, so it seemed like things didn't fit properly but this is by design. Just don't overtighten the two bigger mounting screws, otherwise you'll bend the aluminum bracket. The gap didn't seem to be an issue and the monitor is securely mounted now.

    Customer image


    Joseph Preston

    5.0 out of 5 stars

    Worked great for A1407 Thunderbolt Display

    Reviewed in the United States on November 12, 2024


    I have a mid-2011 Thunderbolt display and wanted to mount on a monitor arm. This VESA adapter worked perfectly, is made of machined aluminum and came with all the right screws and tools to get the job done. They even included a special bent piece of plastic to properly unlock the stand so you can reveal the attachment screws to remove the stand and attach the mount.

    Read their instructions because for my mounting setup, there was about a 3/8" gap between the mounting block and the plate, so it seemed like things didn't fit properly but this is by design. Just don't overtighten the two bigger mounting screws, otherwise you'll bend the aluminum bracket. The gap didn't seem to be an issue and the monitor is securely mounted now.

    Images in this review

    Customer imageCustomer image

    One person found this helpful

    Helpful


    Report


  • Chris Stratton

    5.0 out of 5 stars

    Exactly what you need to arm-mount your Apple Display

    Reviewed in the United States on December 12, 2024

    Verified Purchase

    A few years ago I bought some USB-powered Video meeting LED lights from HumanCentric. The controller failed and HumanCentric quickly acknowledged the known issue and quickly mailed me an updated controller. I still use the lights to this day!
    For this reason I did not hesitate to buy another product from them. Their mount is well-built and comes with everything you need to arm-mount your old Apple Display, even the card tool to remove your factory stand! Took me less than 10 minutes! I am very happy and would not hesitate to buy any product they offered expecting it to be well designed, well made, well packaged, clear instructions, and people of integrity standing behind it. Thank you HumanCentric. Perfect!

    Customer image


    Chris Stratton

    5.0 out of 5 stars

    Exactly what you need to arm-mount your Apple Display

    Reviewed in the United States on December 12, 2024


    A few years ago I bought some USB-powered Video meeting LED lights from HumanCentric. The controller failed and HumanCentric quickly acknowledged the known issue and quickly mailed me an updated controller. I still use the lights to this day!
    For this reason I did not hesitate to buy another product from them. Their mount is well-built and comes with everything you need to arm-mount your old Apple Display, even the card tool to remove your factory stand! Took me less than 10 minutes! I am very happy and would not hesitate to buy any product they offered expecting it to be well designed, well made, well packaged, clear instructions, and people of integrity standing behind it. Thank you HumanCentric. Perfect!

    Images in this review

    Customer image


    Helpful


    Report


  • Nublet

    5.0 out of 5 stars

    Good mount, bad Apple hinge design!

    Reviewed in the United States on June 19, 2017

    Verified Purchase

    So this product is great. Used was just fine. Straight forward if the monitor stand releases right.

    What stinks is Apple's garbage hinge design. It is very easy to release the monitor stand hinge and have it retract inside the monitor.

    The hinge release is a critical part of being able to utilize this without getting confused.

    I really wish it included a tool to pull the stupid hinge back up if something goes wrong. Or at least a troubleshooting section. I have seen a lot of posts about it. Fortunately it's easy enough to bootleg things back. Hopefully this review helps someone. Two approaches. Take it to Apple if you aren't skilled. The alternative is to use some form of wire or fishing string. Cat5 works great. Thread it through the holes, wrap around a screw driver or pliers, press the lock patch again, and then pull up. Don't forget to release the lock first when it's up. After that, this mount is great. 10 minutes to install, 2.5 hours messing with Apples stupid stand hinge.

    4 people found this helpful

    Helpful


    Report


  • CJ

    5.0 out of 5 stars

    Exactly what you're looking for

    Reviewed in the United States on September 16, 2018

    Verified Purchase

    HumanCentric did a great job in writing the description for the product as well as giving you a general sense that although this isn't crazy difficult, there may be some bumps in the road during installation. After ordering they sent out an email describing everything in a little more detail, along with offering to help walk through it once everything was received. All the necessary tools are included in the package so all you need is a little bit of time to get everything installed. The instructions were very clear and easy to follow. Actual installation wasn't all that difficult as I was prepared for a real mess. The absolute most difficult and most important part is to MAKE SURE THE STAND IS LOCKED INTO PLACE once you use the included card to access the screws. After I took out a few screws the stand started to slip back into the iMac but luckily I was able to get it to release and lock again.

    TL;DR – Great product. Easy instructions and preparation. Once installed everything works perfectly and looks awesome mounted on the wall swing arm.

    5 people found this helpful

    Helpful


    Report


  • Andy Rice

    4.0 out of 5 stars

    Quality mount, but instructions missing one important detail

    Reviewed in the United States on March 29, 2018

    Verified Purchase

    The mount works as advertised, and seems very sturdy and solidly built.

    However, the instructions failed me on one obvious (perhaps), but very important step. After you remove the stand from your monitor/computer, the mounting bracket should be exposed. It isn't clear from the instructions that this should be the case, and for me the mounting bracket retreated back into the monitor after I removed the stand. So after rereading the instructions, looking around inside the monitor with a flashlight, and otherwise thinking I had missed something very obvious, I came back to Amazon to check what I bought, thinking that I bought the wrong thing. I then read more reviews for the mount and discovered that what happened in my case is pretty common.

    If this happens to you, you're going to have to get creative to expose the mount. What I ended up doing was taking a length of guitar string and threading it through the screw holes on the mounting bracket, then pulling (while simultaneously pushing in the tab with the provided plastic card). I eventually got it to lock in place so I could install the flange, but it was a HUGE pain.

    Had the instructions made more explicit the need to make sure the mounting bracket remains locked and exposed before you remove the stand, it would've saved me a lot of time and frustration. And given that this is pretty common, it would also be helpful if they included guidance on what to do if your mounting bracket doesn't stay exposed.

    33 people found this helpful

    Helpful


    Report


  • austeros

    5.0 out of 5 stars

    Great for attaching Apple Thunderbolt Display to HEMUDU Single Tall Desk Monitor Arm Mount Stand

    Reviewed in the United States on October 24, 2024

    Verified Purchase

    Purchased this to mount my Apple Thunderbolt Display to a HEMUDU Single Tall Desk Monitor Arm Mount Stand on my standing desk. Held the display well. No concern about stability. Easy enough to add/remove to the display.


    Helpful


    Report


  • Al D.

    1.0 out of 5 stars

    This just doesn’t fit 27” LED 2011 Apple Cinema

    Reviewed in the United States on July 3, 2022

    Verified Purchase

    The description is misleading. This mount doesn’t fit the 2011 27” Apple Cinema. Just look at the picture. I didn’t look at the reviews carefully enough to see this problem. And the bolts provided are too short to cover all this room between the monitor’s body and the mount. I see somebody in the reviews solved this by buying longer bolts, but I guess I’m not supposed to do any additional finicky business with the product that I paid for. Also this just doesn’t look right to me, because bolting this mount as is doesn’t look sturdy enough for a heavy monitor like this. Disappointed, returning.

    Customer image


    Al D.

    1.0 out of 5 stars

    This just doesn’t fit 27” LED 2011 Apple Cinema

    Reviewed in the United States on July 3, 2022


    The description is misleading. This mount doesn’t fit the 2011 27” Apple Cinema. Just look at the picture. I didn’t look at the reviews carefully enough to see this problem. And the bolts provided are too short to cover all this room between the monitor’s body and the mount. I see somebody in the reviews solved this by buying longer bolts, but I guess I’m not supposed to do any additional finicky business with the product that I paid for. Also this just doesn’t look right to me, because bolting this mount as is doesn’t look sturdy enough for a heavy monitor like this. Disappointed, returning.

    Images in this review

    Customer image


    Helpful


    Report


Top reviews from other countries

Translate all reviews to English






  • Arturo Cerecedo
    5.0 out of 5 stars

    Cumple con su trabajo

    Reviewed in Mexico on October 21, 2024

    Verified Purchase

    Esencialmente es lo mismo que el de marca Apple, es de buena construcción y muy fácil de instalar, no tiene mayores complicaciones, los comentarios que he visto negativos se basan en el problema con el propio soporte del Led Cinema o de la iMac, pero no con el producto adquirido en si, es buen producto



    Report


  • oliver
    1.0 out of 5 stars

    Had to cut mount and re-tap screwholes it to make it fit.

    Reviewed in the Netherlands on January 16, 2025

    Verified Purchase

    As seen in other reviews the brace is too tall. As this was the only imac 2011 27” brace that amazon showed me i thought i had no other choice. Or buy the apple one.
    Had to grind of a good 0.6 mm on each side and cut the plastic feet to make it fit.
    Then i had to re-tap the 2 big mounting holes because apparently they were not properly tapped/deburred at the factory thus stripping both supplied screws. Got new ones from the hardware store.
    Only after doing all this Amazon starts showing me other imac vesa mounts which look lik exact copys of the apple version.
    Better buy anything else if you have an imac 2011 27”.

    Customer image


    oliver

    1.0 out of 5 stars

    Had to cut mount and re-tap screwholes it to make it fit.

    Reviewed in the Netherlands on January 16, 2025


    As seen in other reviews the brace is too tall. As this was the only imac 2011 27” brace that amazon showed me i thought i had no other choice. Or buy the apple one.
    Had to grind of a good 0.6 mm on each side and cut the plastic feet to make it fit.
    Then i had to re-tap the 2 big mounting holes because apparently they were not properly tapped/deburred at the factory thus stripping both supplied screws. Got new ones from the hardware store.
    Only after doing all this Amazon starts showing me other imac vesa mounts which look lik exact copys of the apple version.
    Better buy anything else if you have an imac 2011 27”.

    Images in this review

    Customer imageCustomer image



    Report


  • Boryana
    5.0 out of 5 stars

    Well done, yet again!

    Reviewed in the United Kingdom on September 13, 2024

    Verified Purchase

    Such a relief! I thought I'd have to replace my Thunderbolt Display but now I can easily wall mount it in my new office. Finding the thing you need and getting is delivered is something we all take for granted, this one was a delivery of an item in scarce supply to a country a lot of vendors exclude from their delivery scope. Fast, neat, reliable – excellent UX, outstanding service! Thank you!



    Report


  • plh
    5.0 out of 5 stars

    Quality machining and all the extra bits

    Reviewed in Canada on February 20, 2018

    Verified Purchase

    Easy to understand instructions and all the tools we needed were included in the package. Had the CinemaDisplay on the arm mount in under 10 minutes.



    Report






  • Fünftes Element
    5.0 out of 5 stars

    Solide und Wertig

    Reviewed in Germany on August 21, 2017

    Verified Purchase

    Weil es mir passiert ist, erwähne ich es hier mal: Beim Abschrauben des Standfusses, unbedingt darauf achten, daß das kleine schmale Befestigungs-Stück, aus dem die Schrauben gelöst werden, voll ausgezogen und eingerastet ist! Sonst kann es passieren, daß nach dem Abschrauben des Standfusses vom Monitor, die Befestigung in dem schmalen Displayslot "verschwindet". Und dann braucht man etwas Geschick und kreatives Denken, um das Teil, an dem dann der Vesa-Adapter angeschraubt wird, wieder da raus zu ziehen. Die Erfahrung braucht es nicht wirklich. Ich empfehle, vor dem Wechsel in Ruhe zwei, drei Tutorials auf Youtube zu kucken und wirklich achtsam beim Wechsel vorzugehen. Belohnt wird man mit einer günstigen und wertigen Halterung, die eine echte Alternative zum Original-Teil von Apple ist. Allerdings sollte man auch darauf achten, einen Monitor-Halter zu kaufen, der mit den ungefähr 10KG eines Apple 27" Displays nicht überfordert ist.



    Report


Important information

Visible screen diagonal

24" / 61 cm
This VESA mount adapter fits select Apple iMacs and displays: This bracket is only tested and guaranteed to work with: Apple Thunderbolt Displays, LED Cinema Displays, 24-inch iMac (aluminum), and only late 2009, mid 2010, mid 2011 for 27-inch iMac. It will not work with other models, check yours carefully. Note: The adapter only works with specific iMacs with removable stands. It will not work with 2021 iMac computers as they do not have removable stands.
Important note: Please check the compatibility chart on the second image to ensure your iMac or Apple Display model is listed. This VESA adapter Does not fit all iMacs and Apple Displays. Double check the year of your model before purchasing. The most recent compatible iMac is over 10 years old. If you aren’t sure if this adapter works for your model, please ask. This bracket replaces the Apple iMac VESA Adapter kit MD179ZM/A.
Mount your Apple iMac or display on a standard VESA mount: Even though these monitors weren’t made with mounting holes, our convenient bracket enables you to connect your Apple iMac or display anyway. Whether you’re looking to mount it on the wall or just get it off your desk, this bracket will let you connect your monitor in seconds. Works with dual and triple (and more) mounts too.
Easy installation: You’ll be able to install this bracket quickly and easily, all specialized tools included. We’ve completely redesigned this adapter to eliminate the alignment issues found in the Apple version, and tested it extensively to make sure it fits your monitor just right.
This unique adapter is different from anything else on the market. The alignment issues that plagued the original Apple adapter (and all its clones) have been eliminated for a greatly improved fit that you can’t find anywhere else.

Customers say

Customers find the product easy to install with clear instructions. They say it works well and is a solid product. The design looks nice and fits snugly yet protectively. Customers also appreciate the tool kit. However, opinions differ on the mount and screw length.

AI-generated from the text of customer reviews


Are you looking for a VESA mount adapter that is compatible with a variety of Apple products, including iMac 24 Inch, iMac 27 Inch (2009, 2010, 2011), LED Cinema Display, and Thunderbolt Displays? Look no further than the HumanCentric VESA Mount Adapter!

This VESA mount adapter is designed to replace the Apple iMac VESA Adapter MD179ZM/A, providing a secure and reliable mounting solution for your Apple devices. With this adapter, you can easily attach your iMac or display to a VESA-compatible mount, stand, or arm for a more ergonomic and versatile setup.

The HumanCentric VESA Mount Adapter is made of high-quality materials and is built to last. It is easy to install and does not require any special tools or expertise. Simply attach the adapter to your iMac or display, and you’re ready to mount it on any VESA-compatible stand or arm.

Upgrade your workspace and improve your viewing experience with the HumanCentric VESA Mount Adapter. Say goodbye to cluttered desks and awkward viewing angles, and say hello to a more comfortable and productive work environment. Get yours today and take your setup to the next level!
#HumanCentric #VESA #Mount #Adapter #Compatible #iMac #Inch #Aluminum #iMac #Inch #LED #Cinema #Display #Thunderbolt #Displays #Replaces #Apple #iMac #VESA #Adapter #MD179ZMA,vesa compatible

  • Banshee Replaces 3500mAh Ni-MH NTN8293 NTN8294 Battery XTS3000 XTS3500 XTS5000



    Banshee Replaces 3500mAh Ni-MH NTN8293 NTN8294 Battery XTS3000 XTS3500 XTS5000

    Price : 35.55

    Ends on : N/A

    View on eBay
    Are you tired of constantly having to recharge your radio battery throughout the day? Say goodbye to that inconvenience with the Banshee 3500mAh Ni-MH NTN8293 NTN8294 Battery replacement for XTS3000, XTS3500, and XTS5000 radios. This high-capacity battery will keep your radio powered up for longer periods, allowing you to stay connected when you need it most. Upgrade to the Banshee battery today and experience the difference in performance and convenience!
    #Banshee #Replaces #3500mAh #NiMH #NTN8293 #NTN8294 #Battery #XTS3000 #XTS3500 #XTS5000,rnn

  • Harshit Rana becomes first Indian cricketer to make T20I debut as a concussion sub, replaces Shivam Dube vs England


    Harshit Rana made his T20I debut in rather unusual circumstances, becoming the first Indian cricketer to play his first international match in this format as a concussion substitute. Rana, who was not originally a part of India’s playing XI for the fourth T20I against England at the Maharashtra Cricket Association Stadium in Pune, came into the side as a concussion substitute for all-rounder Shivam Dube.

    India’s Harshit Rana in action(REUTERS)

    Dube, who himself was playing his first match of the series, replacing Washington Sundar in the XI, smashed 53 off 34 balls to help India reach 181/9 in their allotted 20 overs. The lanky left-hander, who coped with a few body blows early into his innings courtesy of some hostile bowling from England fast bowler Jofra Archer, was hit on the helmet by a Jamie Overton bouncer on the penultimate ball of the Indian innings.

    Dube was run out while coming back for a second run on the last ball of the over and did not come out to the field. The medical team was looking after him. Ramandeep Singh was in the field for the first six over.

    Rana, meanwhile, came in as the substitute after the powerplay. The official confirmation for the same came a couple of overs later. “Harshit Rana is the concussion substitute for Shivam Dube,” the BCCI said.

    By then Rana had already left a mark on the match by taking a sharp catch off Ravi Bishnoi’s bowling that saw the back of England captain Jos Buttler.

    Rana was introduced to the attack in the 12th over, and he was successful as early as the second ball of his spell. Liam Livingstone got an outside edge to keeper Sanju Samson.

    Rana made his Test debut in the Border-Gavaskar Trophy and played the first two Tests.

    Hardik Pandya, Shivam Dube power India to 181/9

    Earlier, Coming in at No. 7, Pandya was stylish and destructive in equal measure hitting four boundaries and an equal number of maximums in his 30-ball-53.

    Dube (53 off 34 balls) also didn’t do too badly in a stand of 87 off 48 balls for the sixth wicket after pacer Saqib Mahmood (3/35 in 4 overs) reduced India to 12 for 3 by the end of second over.

    Dube was coming back into national colours after bagging a pair in a Ranji Trophy match against Jammu and Kashmir last week.

    But Pandya, who many feel can take MS Dhoni’s role as a finisher, began with an aggressive approach, then rotated the strike for a few overs before launching a brutal final assault on the English bowlers. However his innings was cut short by one shot too many.

    He got an able ally in Dube, who hit seven fours and two sixes as India got as many as 109 runs in the back-10.

    Mahmood, playing his first game of the series, struck thrice in his first over and all three were well-planned dismissals.



    Harshit Rana creates history as first Indian cricketer to debut as a concussion sub in T20I match against England

    In a groundbreaking moment for Indian cricket, Harshit Rana has become the first Indian cricketer to make his T20I debut as a concussion substitute. Rana replaced Shivam Dube in the ongoing T20I series against England after Dube suffered a concussion during the match.

    The 24-year-old all-rounder was called up to the Indian squad as a replacement player for the injured Hardik Pandya, and he grabbed the opportunity with both hands. Rana impressed with his performance in domestic cricket and was rewarded with a chance to represent his country in the shortest format of the game.

    Rana’s debut as a concussion substitute highlights the importance of player safety in cricket and the protocols in place to protect the well-being of athletes. His inclusion in the playing XI is a testament to his talent and hard work, and it marks a significant milestone in his cricketing career.

    As Rana takes to the field in his first T20I match against England, Indian cricket fans are eagerly awaiting to see what he can bring to the team. His selection as a concussion sub showcases the depth and talent in Indian cricket, and it is a proud moment for both Rana and Indian cricket as a whole.

    Congratulations to Harshit Rana on his historic T20I debut, and here’s hoping for a successful and memorable journey ahead for the talented cricketer. Let’s cheer him on as he represents India on the international stage! #HarshitRana #T20I #Cricket #IndiaVsEngland

    Tags:

    Harshit Rana, Indian cricketer, T20I debut, concussion sub, Shivam Dube, England, cricket news, Indian sports, T20I debut, Harshit Rana debut, Indian cricket player, concussion substitute, England vs India, Harshit Rana news, cricket update, Indian cricketer debut

    #Harshit #Rana #Indian #cricketer #T20I #debut #concussion #replaces #Shivam #Dube #England

  • VR9205R2413/U – OEM Upgraded Furnace Gas Valve Assembly Replaces Resideo


    Price: $218.99
    (as of Jan 31,2025 17:02:22 UTC – Details)



    This is a brand new OEM upgraded Furnace Gas Valve Assembly
    Product Dimensions ‏ : ‎ 6 x 7 x 6 inches; 2.31 Pounds
    Date First Available ‏ : ‎ February 16, 2024
    Manufacturer ‏ : ‎ Resideo
    ASIN ‏ : ‎ B0CVSFZJBH

    This is a brand new OEM upgraded Furnace Gas Valve Assembly
    This OEM Part Directly Replaces Part # VR9205R2413/U
    Top Quality OEM Replacement Part, Built to Last!
    Works with Resideo and more!


    Introducing the VR9205R2413/U – OEM Upgraded Furnace Gas Valve Assembly Replacement for Resideo!

    If you’re looking to upgrade your furnace’s gas valve assembly, look no further than the VR9205R2413/U. This OEM replacement is designed to be a direct fit for Resideo furnaces, ensuring a seamless installation process.

    With its high-quality construction and reliable performance, the VR9205R2413/U is built to last and will keep your furnace running smoothly for years to come. Say goodbye to worrying about gas leaks or malfunctions with this upgraded gas valve assembly.

    Don’t wait until your current gas valve assembly fails – upgrade to the VR9205R2413/U today and enjoy peace of mind knowing your furnace is in top working condition. Order yours now and experience the difference it can make in your home’s comfort and efficiency.
    #VR9205R2413U #OEM #Upgraded #Furnace #Gas #Valve #Assembly #Replaces #Resideo,vr8205s2296 gas valve

  • VS8178A1046 – ClimaTek Upgraded Millivolt Gas Valve Replaces Honeywell


    Price: $229.95
    (as of Jan 31,2025 16:02:42 UTC – Details)



    This is a brand new upgraded Millivolt Gas Valve
    Product Dimensions ‏ : ‎ 4 x 6 x 5 inches; 2.13 Pounds
    Date First Available ‏ : ‎ July 17, 2024
    Manufacturer ‏ : ‎ ClimaTek
    ASIN ‏ : ‎ B0D9MSZ4X1

    This is a brand new upgraded Millivolt Gas Valve
    This ClimaTek Part Directly Replaces Part # VS8178A1046
    Top Quality ClimaTek Replacement Part, Built to Last!


    Are you in need of a reliable millivolt gas valve replacement for your heating system? Look no further than the VS8178A1046 ClimaTek Upgraded Millivolt Gas Valve! This high-quality valve is designed to replace Honeywell gas valves with ease, providing you with a durable and efficient solution for your heating needs.

    The ClimaTek Upgraded Millivolt Gas Valve is built to last, with a sturdy construction that ensures long-lasting performance. It is also designed to be easy to install, making it a convenient choice for both professional HVAC technicians and DIY enthusiasts.

    Upgrade your heating system with the VS8178A1046 ClimaTek Upgraded Millivolt Gas Valve and enjoy reliable, efficient performance for years to come. Don’t let a faulty gas valve compromise the comfort of your home or business – invest in the best with ClimaTek!
    #VS8178A1046 #ClimaTek #Upgraded #Millivolt #Gas #Valve #Replaces #Honeywell,vr8205s2296 gas valve

  • VR8215S-1289 – OEM Upgraded Furnace Gas Valve Replaces Resideo


    Price: $169.95
    (as of Jan 31,2025 11:53:51 UTC – Details)



    This is a brand new OEM upgraded Furnace Gas Valve
    Product Dimensions ‏ : ‎ 7 x 5 x 5 inches; 1.5 Pounds
    Item model number ‏ : ‎ VR8215S-1289
    Date First Available ‏ : ‎ November 15, 2023
    Manufacturer ‏ : ‎ Resideo
    ASIN ‏ : ‎ B0CNDBJQCW

    This is a brand new OEM upgraded Furnace Gas Valve
    This OEM Part Directly Replaces Part # VR8215S-1289
    Top Quality OEM Replacement Part, Built to Last!
    Works with Resideo and more!


    Are you in need of a reliable and high-quality gas valve for your furnace? Look no further than the VR8215S-1289 OEM upgraded furnace gas valve, designed to replace Resideo valves with ease.

    This upgraded gas valve is made with durability and performance in mind, ensuring that your furnace operates efficiently and effectively. With easy installation and compatibility with a wide range of furnace models, this gas valve is a cost-effective solution for your heating needs.

    Don’t let a faulty gas valve leave you in the cold this winter. Upgrade to the VR8215S-1289 and enjoy peace of mind knowing your furnace is in good hands. Get yours today and keep your home warm and comfortable all year round.
    #VR8215S1289 #OEM #Upgraded #Furnace #Gas #Valve #Replaces #Resideo,vr8205s2296 gas valve

  • VR8200A2132 – ClimaTek Upgraded Gas Valve 24 Volt Replaces Honeywell


    Price: $185.95
    (as of Jan 31,2025 04:17:53 UTC – Details)



    This is a brand new upgraded Gas Valve 24 Volt
    Product Dimensions ‏ : ‎ 4 x 6 x 5 inches; 2.44 Pounds
    Item model number ‏ : ‎ VR8200A2132
    Date First Available ‏ : ‎ August 5, 2024
    Manufacturer ‏ : ‎ ClimaTek
    ASIN ‏ : ‎ B0DC6YJ8MR

    This is a brand new upgraded Gas Valve 24 Volt
    This ClimaTek Part Directly Replaces Part # VR8200A2132
    Top Quality ClimaTek Replacement Part, Built to Last!


    Looking to upgrade your gas valve for improved heating performance? Look no further than the VR8200A2132 – ClimaTek Upgraded Gas Valve 24 Volt. This high-quality gas valve is designed to replace Honeywell models, providing a reliable and efficient solution for your heating needs.

    With easy installation and compatibility with a range of heating systems, the ClimaTek gas valve is a cost-effective way to enhance the performance of your HVAC system. Say goodbye to outdated and inefficient gas valves and experience the benefits of upgraded technology with the VR8200A2132.

    Don’t settle for subpar heating performance – upgrade to the ClimaTek gas valve today and enjoy improved efficiency and reliability in your home.
    #VR8200A2132 #ClimaTek #Upgraded #Gas #Valve #Volt #Replaces #Honeywell,vr8205s2296 gas valve

  • VR8200A2082 – ClimaTek Upgraded Gas Valve Replaces Honeywell


    Price: $156.95
    (as of Jan 31,2025 01:03:50 UTC – Details)



    This is a brand new upgraded Gas Valve
    Product Dimensions ‏ : ‎ 4 x 6 x 5 inches; 2.44 Pounds
    Date First Available ‏ : ‎ August 5, 2024
    Manufacturer ‏ : ‎ ClimaTek
    ASIN ‏ : ‎ B0DC72FX43

    This is a brand new upgraded Gas Valve
    This ClimaTek Part Directly Replaces Part # VR8200A2082
    Top Quality ClimaTek Replacement Part, Built to Last!


    Are you in need of a reliable gas valve for your heating system? Look no further than the VR8200A2082 ClimaTek Upgraded Gas Valve, which is designed to replace the Honeywell gas valve in your furnace or boiler.

    This upgraded gas valve offers improved performance and durability, ensuring that your heating system runs smoothly and efficiently. It is compatible with a wide range of heating systems and is easy to install, making it a convenient and cost-effective solution for your heating needs.

    Don’t let a malfunctioning gas valve leave you in the cold. Upgrade to the VR8200A2082 ClimaTek Gas Valve today and enjoy reliable heating all winter long.
    #VR8200A2082 #ClimaTek #Upgraded #Gas #Valve #Replaces #Honeywell,vr8205s2296 gas valve

  • VR9205R2413 – OEM Upgraded Furnace Gas Valve Assembly Replaces Honeywell


    Price: $218.99
    (as of Jan 30,2025 19:15:52 UTC – Details)



    This is a brand new OEM upgraded Furnace Gas Valve Assembly
    Product Dimensions ‏ : ‎ 6 x 7 x 6 inches; 2.31 Pounds
    Item model number ‏ : ‎ VR9205R2413
    Date First Available ‏ : ‎ February 16, 2024
    Manufacturer ‏ : ‎ HYWL
    ASIN ‏ : ‎ B0CVSDK8XS

    This is a brand new OEM upgraded Furnace Gas Valve Assembly
    This OEM Part Directly Replaces Part # VR9205R2413
    Top Quality OEM Replacement Part, Built to Last!
    Works with Honeywell and more!


    Looking to upgrade your furnace gas valve assembly? Look no further than the VR9205R2413 OEM Upgraded Furnace Gas Valve Assembly. This high-quality replacement part is designed to replace the Honeywell gas valve assembly in your furnace, providing improved performance and reliability.

    With easy installation and a durable construction, this upgraded gas valve assembly is a cost-effective solution for keeping your furnace running smoothly. Say goodbye to unreliable heating and hello to consistent warmth with the VR9205R2413 OEM Upgraded Furnace Gas Valve Assembly.

    Don’t wait until your furnace breaks down – upgrade to the VR9205R2413 today and enjoy peace of mind knowing your heating system is in top condition. Trust the experts and choose quality with this OEM upgraded gas valve assembly.
    #VR9205R2413 #OEM #Upgraded #Furnace #Gas #Valve #Assembly #Replaces #Honeywell,vr8205s2296 gas valve

    • Hello, how can I help you today?
    Gathering thoughts.. ...
    Powered by AI
    Chat Icon