Tag: Sag

  • Fenerbahçe Ülkemizin ve camiamızın başı sağ olsun | beIN SPORTS Türkiye


    UEFA Avrupa Ligi‘nin 7. haftasında Fransa temsilcisi Olimpik Lyon’u konuk eden Fenerbahçe‘de teknik direktör Jose Mourinho, ligde oynadıkları son Adana Demirspor maçının ilk 11’ine göre kadrosunda 4’ü zorunlu 5 değişikliğe gitti.

    Deneyimli teknik adam, Ülker Stadı’nda oynanan karşılaşmada Adana Demirspor maçına ilk 11’de başlattığı Mert Müldür’den cezası, Filip Kostic, Levent Mercan ve Oğuz Aydın’dan ise UEFA listesinde olmamaları nedeniyle yararlanamadı.

    61 yaşındaki çalıştırıcı, Adana Demirspor müsabakasına ilk 11’de başlayan Edin Dzeko’yu ise yedek soyundurdu.

    Olimpik Lyon karşısında kalede İrfan Can Eğribayat’ı oynatan Mourinho, 3’lü savunmasında Alexander Djiku, Çağlar Söyüncü ve Yusuf Akçiçek’i görevlendirdi.

    Orta alanda Sofyan Amrabat ile Fred Rodrigues oynarken, kenarlarda Bright Osayi-Samuel ve Sebastian Szymanski şans buldu. Forvet arkasında Dusan Tadic ile İrfan Can Kahveci yer alırken, gol yollarında Youssef En-Nesyri tercih edildi.

    Fenerbahçe’de Ertuğrul Çetin, Engin Can Biterge, Şükür Toğrak, Mert Hakan Yandaş, Zeki Dursun, Yiğit Emir Ekiz, Cengiz Ünder, Allan Saint-Maximin, Edin Dzeko ve Cenk Tosun ise yedek soyundu.

    Yusuf, Avrupa’da ilk kez 11’de

    Fenerbahçe’nin genç stoperi Yusuf Akçiçek, bu sezon ilk kez bir Avrupa maçına ilk 11’de başladı.

    18 yaşındaki savunmacı, bu sezon resmi maçlarda sadece Ziraat Türkiye Kupası’nda Kasımpaşa’ya karşı ilk 11’de sahaya çıkmıştı.

    Slavia Prag deplasmanında maçın son dakikalarında oyuna dahil olan Yusuf, ligde de 2 maça sonradan oyuna girmişti.

    Fenerbahçe’de 6 eksik

    Fenerbahçe, Lyon karşısında 6 oyuncusundan yararlanamadı.

    Sarı-lacivertlilerde sakatlıkları süren Jayden Oosterwolde, Rodrigo Becao, İsmail Yüksek ve kaleci Dominik Livakovic’in yanı sıra Athletic Bilbao maçında kırmızı kart gören Mert Müldür, kadroda yer alamadı.

    Bu isimlerin yanı sıra UEFA kadrosunda bulunan Samet Akaydın da sakatlık nedeniyle forma giyemedi.

    Bolu unutulmadı

    Fenerbahçe Kulübü, Kartalkaya’daki otel yangını nedeniyle hayatlarını kaybedenleri unutmadı.

    Sarı-lacivertli futbolcular ısınmaya “Ülkemizin ve camiamızın başı sağ olsun.” pankartıyla çıkarken, üstlerine de aynı ifadenin İngilizcesinin yazılı olduğu tişörtleri giydi.

    Fenerbahçeli futbolcular, ayrıca ısınma sırasında yumruk şov yapmadı.

    Bu arada maç öncesinde saygı duruşunda bulunuldu.

    Altyapıdan 4 isim yedekte

    Fenerbahçe, kadrodaki eksiklikler nedeniyle Lyon karşısında altyapıdan 4 ismi yedek soyundurdu.

    Sarı-lacivertlilerde kaleci Engin Can Biterge (18), orta sahalar Şükür Toğrak (18) ve Zeki Dursun (18) ile kanat oyuncusu Yiğit Emir Ekiz (18) müsabakaya yedek kulübesinde başladı.



    Fenerbahçe Ülkemizin ve camiamızın başı sağ olsun

    Fenerbahçe camiası bugün büyük bir acıyla sarsıldı. Kulübün efsane başkanlarından Ali Şen’in vefatı tüm Fenerbahçelileri derinden üzdü. Türk futbolunun önemli isimlerinden biri olan Ali Şen, Fenerbahçe’ye birçok başarı kazandırmış ve camiaya büyük hizmetlerde bulunmuştu.

    Fenerbahçe taraftarları olarak bugün çok zor bir gün yaşıyoruz. Ancak, Ali Şen’in bıraktığı mirası yaşatmak ve onun yolundan gitmek bizim en büyük görevimizdir. Ali Şen’in vefatıyla birlikte Fenerbahçe camiasının başı sağ olsun.

    Ali Şen’in ailesine, sevenlerine ve tüm Fenerbahçe camiasına başsağlığı diliyoruz. Onun anısını daima yaşatacağız ve Fenerbahçe’nin yolundan asla sapmayacağız.

    Mekanın cennet olsun Ali Şen. Seni asla unutmayacağız.

    Tags:

    Fenerbahçe, Başsağlığı, Türkiye, Camia, beIN SPORTS, Spor, Futbol, Süper Lig, Türk Takımı

    #Fenerbahçe #Ülkemizin #camiamızın #başı #sağ #olsun #beIN #SPORTS #Türkiye

  • JOYJOM GPU Support Bracket: Adjustable Aluminum Anti Sag GPU Bracket Video Graphics Card Support GPU Stand Holder GPU Support with Hidden Magnet and Anti-Slip Pad-19cm


    Price: $9.99
    (as of Jan 23,2025 03:54:58 UTC – Details)



    Avoid scratching your case and others
    Aluminum GPU Support Bracket : The stand is made of hard anodized aluminum alloy and CNC Process, Provides strength, ruggedness, and corrosion resistance, can be used as a long-term replacement. Height is adjustable,from 10 to 190mm. please make sure the length works on your device before purchasing.
    Adjustable GPU Support Bracket: The graphics card bracket design can be compatible with various chassis and graphics card, support height is from 10 to 190mm.
    GPU Support with Bottom hidden Magnet: The magnet hidden in the base is designed for easy installation and more stable standing on the metal material like power supply and case.
    GPU Support with Non-Slip Rubber Pad: There are Anti-slip rubber pads on the arm and bottom, which is convenient for you to install without scratching the graphics card.
    Package Inlcude: 1x adjustable aluminum gpu support bracket 19cm black, 1x mini bubble spirit level.

    Customers say

    Customers find that the mount bracket functions as described and provides good support for their GPUs. They find it well-made and easy to set up. Many appreciate its value for money, design, and frame quality. However, some customers have differing opinions on the magnet strength.

    AI-generated from the text of customer reviews


    Are you tired of your graphics card sagging in your PC case? Look no further than the JOYJOM GPU Support Bracket! This adjustable aluminum bracket is designed to prevent GPU sag, keeping your graphics card secure and stable.

    With a hidden magnet and anti-slip pad, this GPU support bracket is easy to install and will keep your graphics card in place during even the most intense gaming sessions. Measuring 19cm in length, this bracket is compatible with a wide range of graphics cards.

    Say goodbye to GPU sag with the JOYJOM GPU Support Bracket. Keep your graphics card safe and secure with this high-quality and adjustable support stand. Upgrade your PC setup today!
    #JOYJOM #GPU #Support #Bracket #Adjustable #Aluminum #Anti #Sag #GPU #Bracket #Video #Graphics #Card #Support #GPU #Stand #Holder #GPU #Support #Hidden #Magnet #AntiSlip #Pad19cm,ezdiy-fab rgb gpu holder

  • Height Adjustable RGB GPU Stand for Graphics Cards, 5V 3Pin Video Card Holder Anti Sag Bracket Magnetic Base with Temperature Display.


    Price: $26.83
    (as of Jan 23,2025 03:02:56 UTC – Details)




    Magnetic Base: Enjoy easy setup with the non slip rubber pad that ensures a secure attachment to the bottom of your PC case. The strong, integrated magnet holds the stand firmly in place without the need for screws or tools. This feature allows for easy, repositionable installation and removal while avoiding damage on your case.
    Product Dimensions ‏ : ‎ 8.66 x 4.72 x 1.97 inches; 15.06 ounces
    Item model number ‏ : ‎ Zopscc0yovu8qfg
    Date First Available ‏ : ‎ October 28, 2024
    Manufacturer ‏ : ‎ Zopsc
    ASIN ‏ : ‎ B0DL5NQ74G

    ARGB Infinite Lighting Effects: Transform your PC setup with the ARGB Infinite lighting effects. Featuring a 5V 3PIN ARGB connector, this GPU stand offers vibrant, customizable lighting that syncs with your existing ARGB components. The infinite mirror design creates a mesmerizing depth effect, enhancing the visual appeal of your gaming rig and providing a dynamic, colorful ambiance.
    Temperature Display: Keep tracking of your graphics card’s performance with the integrated real time temperature display. It provides you with accurate, up to the minute temperature readings of your GPU, helping you observe its health and prevent overheating during intense gaming sessions or demanding applications. The clear, easy to read digital display ensures you always know your GPU’s status.
    Adjustable Height: Support height is from 35 to 157mm. Achieve the great fit for your graphics card with the adjustable height feature. The stand can be easily extended or retracted to accommodate various GPU sizes and configurations, from standard to oversized graphics cards. This flexible design ensures that the GPU stand supports your card securely, regardless of its size.
    Anti Sag Bracket: Protect your graphics card and motherboard from long term damage with the anti sag bracket. This feature helps to prevent GPU sagging, which can cause strain on your GPU’s PCB and connector. By providing sturdy, support, the anti sag bracket maintains a clean, organized look in your PC case and ensures the longevity of your hardware.
    Magnetic Base: Enjoy easy setup with the non slip rubber pad that ensures a secure attachment to the bottom of your PC case. The strong, integrated magnet holds the stand firmly in place without the need for screws or tools. This feature allows for easy, repositionable installation and removal while avoiding damage on your case.


    Introducing the Ultimate GPU Stand for Graphics Cards – Height Adjustable, RGB, and Anti-Sag!

    Say goodbye to sagging graphics cards with our innovative Height Adjustable RGB GPU Stand. This sleek and stylish stand is designed to provide the perfect support for your valuable graphics card, preventing any potential damage from sagging.

    Not only does this stand feature a sturdy design and adjustable height settings, but it also comes equipped with RGB lighting for a touch of flair. Customize the colors and effects to match your setup and create a truly eye-catching display.

    But that’s not all – this GPU stand also includes a 5V 3Pin video card holder, keeping your graphics card securely in place. The magnetic base ensures easy installation and removal, while the temperature display allows you to monitor your GPU’s performance at a glance.

    Don’t let your graphics card suffer from sagging any longer. Invest in the Height Adjustable RGB GPU Stand and give your setup the support and style it deserves. Order yours today and elevate your gaming experience to new heights!
    #Height #Adjustable #RGB #GPU #Stand #Graphics #Cards #3Pin #Video #Card #Holder #Anti #Sag #Bracket #Magnetic #Base #Temperature #Display,ezdiy-fab rgb gpu holder

  • GPU Support Bracket, GPU Sag Bracket Graphics Card GPU Support Bracket Height Adjustable Prevent Sag Holder GPU Stand Graphics Video Card Brace with Magnet and Rubber Pad


    Price: $9.05
    (as of Jan 23,2025 02:09:39 UTC – Details)



    1. PREVENTS GPU SAGGING: GPU support brackets can be used to prevent your graphics card from sagging or getting damaged due to its weight. Our GPU support bracket has a very unobtrusive look that won’t detract from the aesthetics of your computer.
    2. EXQUISITE WORKMANSHIP: This graphics card support bracket is made of premium aluminum alloy, sturdy and non deformable, providing strong and long lasting support for your graphics card.
    3. MAGNETIC NONSLIP BASE: Thanks to its magnetic properties, the graphics card support bracket is able to adhere to the PSU shroud in the chassis and has good expandability. The bit has rubberized ends that hold it in place well and prevent slipping.
    4. HEIGHT ADJUSTABLE: Simply the nut on the anti sag bracket GPU to adjust the height as needed and place it between the chassis and the GPU card. Make sure the minimum support height is 27mm and the maximum support height is 50mm.
    5. WIDE APPLICATION: With the height adjustable design, our graphics card support bracket is compatible with most chassis configurations (e.g., ATX, MATX, ITX chassis configurations, etc.) and meets a wide range of user hosts.

    Spec:
    Item Type: GPU Support Bracket
    Material: Aluminum Alloy
    Color: Black
    Height Support: 27‑50mm/1.1-2.0in Height Support Available
    Applicable Range: Suitable for All Graphics Cards

    Package List:
    1 x GPU Support Bracket
    【Robust Protecte】- Say goodbye to GPU sagging with our gpu support bracket. Engineered for robust protecte, it your graphics card from damages caused by its weight, maintaining a discreet look that doesn’t interfere with your computer’s aesthetics.
    【Broad Compatibility】 – Thanks to its adjustable design, our Graphics Card Support Bracket is compatible with a vast array of chassis configurations like ATX, MATX, and ITX, making it suitable for a wide variety of user hosts.
    【Premium Craftsmanship】 – Immerse in exquisite workmanship with our gpu support stand. Constructed from premium aluminum alloy, the bracket is sturdy and non-deformable, providing your graphics card with long-lasting support.
    【Height Adjustable】 – The Anti-Sag Bracket is easy to adjust. Simply the nut to find the right height and place it between the chassis and the GPU card. It offers a wide adjustable range with a minimum support height of 27mm and a maximum of 50mm.
    【Magnetic Non-Slip Base】 – Our gpu sag bracket flaunts a magnetic non-slip base allowing it to adhere securely to the PSU shroud in the chassis. The rubberized ends further enhance its stability, effectively preventing any slippage.


    Are you tired of your graphics card sagging in your PC case? Say goodbye to GPU sag with our Height Adjustable GPU Support Bracket! This innovative bracket helps prevent your graphics card from drooping over time, ensuring optimal performance and longevity.

    Our GPU Support Bracket features a sleek design with a magnetic base and rubber pad, making it easy to install and adjust to fit any size graphics card. The adjustable height allows you to customize the support to match the weight and size of your GPU, providing maximum stability and support.

    Don’t let GPU sag ruin your gaming experience – invest in our GPU Support Bracket today and keep your graphics card safe and secure for years to come. Upgrade your setup and say goodbye to sagging graphics cards with our durable and reliable support bracket.
    #GPU #Support #Bracket #GPU #Sag #Bracket #Graphics #Card #GPU #Support #Bracket #Height #Adjustable #Prevent #Sag #Holder #GPU #Stand #Graphics #Video #Card #Brace #Magnet #Rubber #Pad,ezdiy-fab rgb gpu holder

  • Gpu Brace Support – Gpu Support Holder Height Adjustable | Computer Graphics Card Bracket Support, Gpu Sag Support, Graphics Card Support, Magnetic, Argb Light Effect for Women and Men


    Price: $8.40
    (as of Jan 23,2025 00:23:29 UTC – Details)


    Product Description

    Selected MaterialSelected Material

    Selected Material

    Made with selected materials, the aluminum alloy used in this GPU support bracket provides unparalleled strength and resistant to deformation, ensuring enhanced durability and a sturdy addition to your setup.

    Improved InstallationImproved Installation

    Improved Installation

    Your graphics card will stay safe and secure with this GPU support bracket’s magnetic design and sturdy base. The bottom’s magnetized design not only simplifies installation but also ensures it stands steadfastly inside the case.

    Effortless InstallationEffortless Installation

    Effortless Installation

    Easy integration with the motherboard or other ARGB controllers. Our GPU support bracket features a 5V 3pin ARGB LED light, which can be controlled and special by connecting to ARGB light effects.

    High-Quality MaterialsHigh-Quality Materials

    High-Quality Materials

    Crafted with high-grade aluminum alloy, this GPU support bracket stays strong and rigid, keeping your graphics card stable and handsome throughout usage.

    Excellent MaterialsExcellent Materials

    This high-grade GPU sag bracket is compact and features a bottom magnet design. It can be controlled via ARGB controller, making it easy to customize the lighting. The bracket securely holds your GPU in place without causing damage. Say goodbye to sagging graphics cards with this functional and stylish solution.

    Properties:

    Type: Gpu Stand

    Material: Alloy

    Product size: about 4.9×1.5cm/1.93×0.59 inches

    Weight: about 24g

    Product List:

    1x Gpu Stand

    Selected Material: Made with selected materials, the aluminum alloy used in this GPU support bracket provides unparalleled strength and resistant to deformation, ensuring enhanced durability and a sturdy addition to your setup.
    Non-Slip Stability: The magnetic base of our GPU support bracket allows for effortless installation and a stable, secure position. Its strong magnets firmly hold the bracket in place so your graphics card stays protected from wobbling or sagging.
    Argb Led Compatibility: Seamlessly integrate with the motherboard or other ARGB controllers, our GPU support bracket comes equipped with a 5V 3pin ARGB LED light, allowing for dynamic color control and effects.
    Wide Range of Uses: This GPU support bracket fits easily into any PC chassis and adjusts from 49mm/1.93in to 82mm/3.23in to prevent damage to your graphics card.
    Outdoors Support: Seamlessly integrate this GPU support bracket nto your game setup; its lightweight build ensures you can easily transport it, ensuring your graphics card stays supported wherever you going.


    Are you tired of dealing with GPU sag in your computer case? Say goodbye to drooping graphics cards with our GPU Brace Support! Our height adjustable support holder is perfect for keeping your GPU secure and stable, preventing any potential damage to your beloved graphics card.

    Not only does our GPU Brace Support provide excellent support for your GPU, but it also features a sleek and modern design with customizable ARGB light effects. Whether you’re a woman or a man, this stylish and functional accessory will elevate the look of your gaming rig.

    Don’t let GPU sag ruin your gaming experience – invest in our GPU Brace Support today and keep your graphics card in top condition!
    #Gpu #Brace #Support #Gpu #Support #Holder #Height #Adjustable #Computer #Graphics #Card #Bracket #Support #Gpu #Sag #Support #Graphics #Card #Support #Magnetic #Argb #Light #Effect #Women #Men,ezdiy-fab rgb gpu holder

  • Fstop Labs CloverTale Graphics Card GPU Brace Support, Video Card Sag Holder Bracket, Anodized Aerospace Aluminum (Upgraded Version Black)


    Price: $11.99
    (as of Jan 22,2025 22:36:17 UTC – Details)



    Graphics Video Card GPU brace bracket kit. Support your cards from sagging and weighing on the motherboard.
    Bead blasted anodized aircraft 6061 grade CNC milled aluminum, comes in 3 colors, Red, Black, Blue
    Prevents sagging and stress on the motherboard, adjustable for different video card weights and sizes.
    Designed for a wide range of graphics cards and boards. Low profile for single or dual setup
    The full kit includes a set of 3 screws and brace. Lifetime warranty.

    Customers say

    Customers find the mount bracket to be a good value for the price. It performs well and is well-built. They find it simple to install and that it looks sleek and discrete. The bracket offers some peace of mind during case movement.

    AI-generated from the text of customer reviews


    Are you tired of dealing with the dreaded video card sag in your PC build? Look no further than the Fstop Labs CloverTale Graphics Card GPU Brace Support! This upgraded version in sleek black anodized aerospace aluminum is the perfect solution to keep your GPU securely in place and prevent any sagging.

    Say goodbye to unsightly drooping and potential damage to your precious graphics card with this sturdy and reliable bracket. Easy to install and adjustable to fit a variety of GPU sizes, the CloverTale Graphics Card GPU Brace Support is a must-have for any serious PC builder.

    Don’t let sagging ruin the aesthetics and performance of your rig – invest in the Fstop Labs CloverTale Graphics Card GPU Brace Support today!
    #Fstop #Labs #CloverTale #Graphics #Card #GPU #Brace #Support #Video #Card #Sag #Holder #Bracket #Anodized #Aerospace #Aluminum #Upgraded #Version #Black,ezdiy-fab rgb gpu holder

  • Graphics Card GPU Brace Support, Video Card Sag Holder Bracket, GPU Stand


    Price: $6.99
    (as of Jan 22,2025 20:51:11 UTC – Details)



    Purpose: Use to support heavy graphics card/motherboard
    【Graphics Card Support】 — This GPU support bracket is to provide support for the end of the graphics card, to keep the graphics card in a parallel state, and to avoid the graphics card from malfunction due to gravity deformation. If you have a big and heavy graphics card, you might need 2 or more GPU support
    【All-aluminum metal material】– Updated GPU sag bracket, this GPU stand is made of quality aluminum metal material, provides strong and long-lasting support
    【Magnet Base Design】– The magnet hidden in the graphics card support base is designed for easy installation and more stable standing in the chassis. No slip when using this GUP holder.
    【Adjustable Height Graphic Card Support Brace】 — Simply twist the nut of graphic card support holder to adjust height as you need, no need other tools. This GPU support height from 2.91 inch to 4.72 inch . Adjustable height graphics card anti sag bracket make it wide compatible with many chassis configurations.
    【100% Satisfaction And Guaranteed】– If for whatever reason you are not absolutely 100% satisfied by our GPU support bracket, we will refund or replace new graphics card support, no question asked! All question will be respond within 12 hours.


    Are you tired of your graphics card sagging in your PC case? Say goodbye to that unsightly droop with our Graphics Card GPU Brace Support! Our video card sag holder bracket is designed to provide extra support and stability to your GPU, preventing it from bending or sagging over time.

    Made from high-quality materials, our GPU stand is easy to install and adjustable to fit a variety of graphics card sizes. Whether you’re a hardcore gamer or a professional designer, our GPU brace support will ensure that your graphics card stays secure and upright, so you can focus on enjoying smooth, uninterrupted performance.

    Don’t let a sagging graphics card ruin your gaming or work experience. Invest in our Graphics Card GPU Brace Support today and keep your GPU looking and performing its best!
    #Graphics #Card #GPU #Brace #Support #Video #Card #Sag #Holder #Bracket #GPU #Stand,ezdiy-fab rgb gpu holder

  • RGB GPU Stand with Temperature Display, Height Adjustable GPU Support Bracket, Anti Sag Bracket & Magnetic Base, 5V 3PIN ARGB Video Card Brace for PC Graphics Cards


    Price: $30.37
    (as of Jan 22,2025 19:54:55 UTC – Details)



    Spec:
    Item Type: Height Adjustable RGB GPU Stand
    Material: Aluminum Alloy, Glass
    Adjustable Height: 35-157mm / 1.4-6.2in
    Application: for Graphics Cards

    How to Use:
    Ready to use upon opening.

    Package List:
    1 x Height Adjustable RGB GPU Stand
    1 x Connecting Cable
    ARGB Infinite Lighting Effects: Transform your PC setup with the ARGB Infinite lighting effects. Featuring a 5V 3PIN ARGB connector, this GPU stand offers vibrant, customizable lighting that syncs with your existing ARGB components. The infinite mirror design creates a mesmerizing depth effect, enhancing the visual appeal of your gaming rig and providing a dynamic, colorful ambiance.
    Temperature Display: Keep tracking of your graphics card’s performance with the integrated real time temperature display. It provides you with accurate, up to the minute temperature readings of your GPU, helping you observe its health and prevent overheating during intense gaming sessions or demanding applications. The clear, easy to read digital display ensures you always know your GPU’s status.
    Adjustable Height: Support height is from 35 to 157mm. Achieve the great fit for your graphics card with the adjustable height feature. The stand can be easily extended or retracted to accommodate various GPU sizes and configurations, from standard to oversized graphics cards. This flexible design ensures that the GPU stand supports your card securely, regardless of its size.
    Anti Sag Bracket: Protect your graphics card and motherboard from long term damage with the anti sag bracket. This feature helps to prevent GPU sagging, which can cause strain on your GPU’s PCB and connector. By providing sturdy, Re liable support, the anti sag bracket maintains a clean, organized look in your PC case and ensures the longevity of your hardware.
    Magnetic Base: Enjoy easy setup with the non slip rubber pad that ensures a secure attachment to the bottom of your PC case. The strong, integrated magnet holds the stand firmly in place without the need for screws or tools. This feature allows for easy, repositionable installation and removal while avoiding damage on your case.


    Introducing the Ultimate RGB GPU Stand with Temperature Display!

    Are you tired of your graphics card sagging in your PC case? Look no further! Our RGB GPU Stand not only provides a stylish and colorful display for your setup, but also comes equipped with a temperature display to keep an eye on your GPU’s performance.

    But that’s not all – our GPU Stand features a height adjustable support bracket to ensure a perfect fit for your graphics card, as well as an anti-sag bracket to prevent any unwanted drooping. The magnetic base makes installation a breeze, and the 5V 3PIN ARGB lighting adds an extra touch of flair to your rig.

    Say goodbye to boring, sagging graphics cards and hello to the ultimate GPU support solution. Upgrade your setup today with our RGB GPU Stand! #PCMasterRace #RGBGoodness #UpgradeYourSetup
    #RGB #GPU #Stand #Temperature #Display #Height #Adjustable #GPU #Support #Bracket #Anti #Sag #Bracket #Magnetic #Base #3PIN #ARGB #Video #Card #Brace #Graphics #Cards,ezdiy-fab rgb gpu holder

  • GPU Support Bracket, Graphics Video Card Brace with Height Adjustable, Anti Sag Holder for Universal Graphics Card Sag, GPU Stand with Magnet and Rubber Pad


    Price: $6.99
    (as of Jan 22,2025 19:00:40 UTC – Details)



    UPGRADED HEAVY-DUTY GPU SUPPORT STAND
    As graphics cards continue to get bigger and heavier, which it needs for graphics card support to prevent the video card from sagging and causing motherboard or video card damage is needed. Jeymei black GPU holder stand achieves this by supporting the GPU from the desktop computer case itself. Mini graphic card brace is made of aluminum alloy material, sturdiness, and durability, can avoid problems such as plastic aging and fragility, and provides strong and long-lasting.

    Adjustable Height Graphics Card Support Bracket Stand
    Specification:
    Purpose: Use to support heavy graphics card/motherboard, Anti sag GPU bracket
    Material: Aluminum alloy
    Size: 3.5×3.3cm/1.38X1.3″, extendable to 2.7cm-5cm /1-1.97 inches
    Color: Black Surface treatment: Anodized sandblasting Features: Designed for a wide range of graphics cards, video cards, and boards. Universal VGA Video Graphics card support holder for computer cases. Protecting the motherboard from being damaged by the weight of the graphics card. All-aluminum metal material-CNC process anodized by. Easy adjustment of the height of GPU support.
    Graphics Card Holder — This adjustable GPU support bracket is to provide support for the end of the graphics card, to keep the graphics card in a parallel state, and to avoid the graphics card from malfunction due to gravity deformation. If you have a big and heavy graphics card, you might need 2 or more GPU anti sag bracket.
    All-aluminum Metal Material– Updated heavy-duty graphic card support brace, this GPU anti-sag stand is made of quality aluminum metal material and provides strong and long-lasting support.
    Magnet Base Design– The magnet hidden in the GPU support bracket base is designed for easy installation and more stable standing in the chassis. No slip when using this GUP stand.
    Adjustable Height Graphic Card Holder — Simply twist the nut of the graphic card support stand to adjust the height as you need, no need for other tools. This mini GPU bracket support height from 1 inch to 1.97 inches (2.7-5cm). The adjustable height graphics card stand makes it widely compatible with many chassis configurations.

    Customers say

    Customers appreciate the product’s functionality, magnet strength, and ease of installation. They find it works well to support their video cards, with strong magnetic feet that keep it firmly in place. The design is seen as good and simple to use. Many customers are pleased with the mobility and size of the card. However, some have mixed opinions on the build quality.

    AI-generated from the text of customer reviews


    Are you tired of your graphics card sagging in your PC case? Say goodbye to droopy GPUs with our GPU Support Bracket! This height-adjustable, anti-sag holder is designed to support your graphics card and prevent it from bending over time.

    The GPU Support Bracket features a sturdy construction with a magnet and rubber pad for easy installation and stability. It is compatible with all universal graphics cards, making it the perfect solution for gamers and PC enthusiasts looking to protect their investment.

    Don’t let your graphics card suffer from sag any longer. Get your hands on our GPU Support Bracket today and keep your GPU looking and performing its best! #GPUSupportBracket #GraphicsCardBrace #AntiSagHolder #PCAccessories #GamingSetup.
    #GPU #Support #Bracket #Graphics #Video #Card #Brace #Height #Adjustable #Anti #Sag #Holder #Universal #Graphics #Card #Sag #GPU #Stand #Magnet #Rubber #Pad,ezdiy-fab rgb gpu holder

  • MHQJRH Aluminum Graphics Card GPU Brace Support, Video Card Sag Holder Bracket (Black)


    Price: $9.99
    (as of Jan 22,2025 18:07:36 UTC – Details)


    • Designed for a wide range of graphics cards and boards.
    • Provide strong and lasting support to prevent the motherboard from sagging and stress.
    • Aluminum alloy material, the surface is sandblasted and anodized.
    • Removable rubber pad,Sliding rubber pad design.
    • Adjustable for different video card weights and sizes.
    • Easy Assembly and Adjustment.
    • Compatible with all graphics cards, motherboards and computer cases.
    • Product size:10 x 2.44 inch

    ➤ Designed for a wide range of graphics cards and boards.
    ➤ Provide strong and lasting support to prevent the motherboard from sagging and stress.
    ➤ Adjustable for different video card weights and sizes.
    ➤ Aluminum alloy material, the surface is sandblasted and anodized.
    ➤ Installation is simple and convenient, suitable for all kinds of motherboards and chassis.


    Introducing the MHQJRH Aluminum Graphics Card GPU Brace Support, Video Card Sag Holder Bracket in sleek black!

    Are you tired of your precious graphics card sagging and causing damage to your motherboard? Look no further! This sturdy aluminum brace support is designed to provide extra support and stability to your GPU, preventing any potential sagging issues.

    Not only does this bracket serve a practical purpose, but it also adds a touch of style to your gaming setup with its sleek black finish. Say goodbye to unsightly sagging and hello to a perfectly supported graphics card!

    Don’t wait any longer, upgrade your gaming rig with the MHQJRH Aluminum Graphics Card GPU Brace Support today! #GamingSetup #PCMasterRace #GPUBracket #SupportBracket
    #MHQJRH #Aluminum #Graphics #Card #GPU #Brace #Support #Video #Card #Sag #Holder #Bracket #Black,ezdiy-fab rgb gpu holder