Price: $70.96 – $61.96
(as of Dec 04,2024 12:45:19 UTC – Details)
Product Description
Perfect Your Build with True 4.0 Performance
Loque Ghost S1
*Cases sold separately
Sliger
*Cases sold separately
Sliger
*Cases sold separately
Easy troubleshooting steps to resolve issues:
Step 1: Update BIOS on both Motherboard and GPU
Update to the newest firmware / BIOS / software for the motherboard and GPU. The newest update can be obtained from the manufacturer’s website.
Step 2: Set BIOS to optimal default
Overclocking is the main reason for the system to become unstable in Gen 4 setting. Reset BIOS to optimal default may resolve the issue and allow the system to run under Gen 4 without issue.
Step 3: Try to boot without the riser cable
Make sure the system can boot properly without the riser cable.
Step 4: Clean the connector contacts on the riser cable and GPU
Cleaning the connector contact (Gold Fingers) on both GPU and riser cable with rubbing alcohol to remove possible particle build-up.
Step 5: Ensure the cable is fully and securely inserted into the socket
Please make sure the male connector (Gold Fingers) is fully inserted into the motherboard’s PCIe socket. Our riser has a very short pin designed to provide better insertion loss. The pins may not be in full contact with the PCIe socket pins resulting in signal lanes drop from x16 to x8, or worse at x4 speed. Make sure you choose the right length cables. Too long or too short may both result in performance loss.
Step 6: Try a different PCI-e slot (Always choose the PCIe slot closest to the CPU)
If the motherboard has multiple Gen 4 PCIe slots, try to install the cable on a different slot.
Step 7: I have done all of the above and I’m still having trouble with the riser cable
PCI-E specifications do not regulate the use of a riser cable. As a result, Gen 4 motherboards are designed to connect the GPU directly. Hence leave a limited headroom for the use of a riser cable, and the use of a riser cable may fail when the insertion loss is over the limits due to poor components used in motherboards. Not all motherboards and GPUs are manufactured to the same quality, some have higher headroom than the other.
In these rare cases, the easiest ways to resolve the problem are:
Exchange another riser cable to try. (If shorter length works, always choose a shorter length)
Exchange another motherboard of the same brand.
Exchange motherboard for a different brand. (99% of the customers have completely resolved the issue at this point)
If none of these works, please get in touch with us directly and provide us with your system information (model/make of MB, CPU, GPU, PC case). We are happy to provide a solution.
*Please do not allow cable to directly touch the backplate of GPU which may generate temperatures higher than the riser cables’ maximum operating temperature of 75 degrees celsius. If direct contact is unavoidable, applying thermal tape is strongly recommended
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.4 out of 5 stars
959
4.5 out of 5 stars
2,994
4.4 out of 5 stars
959
4.3 out of 5 stars
496
4.4 out of 5 stars
2,027
Price
$27.96$27.96
$46.96$46.96
$30.98$30.98
$20.96$20.96
$24.96$24.96
PCIE 4.0 Verified
x
PCIE 4.0 Verified
x
x
PSU Cable Extension
Cable Angle
Straight
Straight, Right, Left or Reverse Angles
Right Angle 90 Degrees
x
x
Maximum Cable Length
Up to 200cm
Up to 50cm
Up to 400cm in PCIe 3.0 Configuration
Up to 60cm
30cm and 50cm
Is Discontinued By Manufacturer : No
Package Dimensions : 8.54 x 5.59 x 0.94 inches; 3.79 ounces
Item model number : PCIE4EXT11VV-019
Date First Available : April 14, 2021
Manufacturer : LINKUP Technology Inc.
ASIN : B092JS4WGJ
Country of Origin : Taiwan
Upgrade to our new future-proof PCIE 5.0 riser cable, perfect for upcoming RTX5090 GPUs arriving in Q4 2024. Secure yours now to stay ahead of the curve! Search: B0D3QTTGCJ
Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. Compatible with GPU – RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset – x570, B550, Z590, Z690 / NZXT H1, and future new GPUs & Chipsets. ***Special Note: Tested to be compatible with mini-ITX MB + RTX3090, RTX3080, RX6800, & RX7900 GPUs. Recommended with mini-ITX MB + RTX30 RTX40 GPUs and RX6000, RX7000 series GPUs.
Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. *Please do not use the screws to mount the TT P8 case (the GPU can still be secured by the two screws on the PCIE slots in the case)
Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. *** Compatible with most GPU/motherboard components and fits most cases. *Overclock is not recommended and may cause system instability. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support.
Customers say
Customers like the functionality of the electronic cable. They mention it works perfectly and is easy to install. However, some customers disagree on the quality, fit, and functionality.
AI-generated from the text of customer reviews
Are you in need of a high-speed riser cable for your gaming setup? Look no further than the LINKUP Ultra PCIe 4.0 X16 Riser Cable!
This shielded cable has been tested with the latest graphics cards such as the RTX4090 and RX6950XT, as well as motherboards like x570, B550, and Z690. Its dual reverse connectors allow for easy vertical mounting, perfect for ITX builds.
With a length of 19cm (7.4 inches), this riser cable is designed for maximum flexibility and compatibility without sacrificing performance. Upgrade your gaming experience with the LINKUP Ultra PCIe 4.0 X16 Riser Cable today!
#LINKUP #RiserCable #GamingSetup #PCIeGen4 #ITXBuilds
#LINKUP #Ultra #PCIe #X16 #Riser #Cable #RTX4090 #RX6950XT #x570 #B550 #Z690 #Tested #Shielded #HighSpeed #Vertical #Mount #Gaming #PCI #Express #Gen4Dual #Reverse #Connectors #19cm #Designed #ITX
![LINKUP – Ultra PCIe 4.0 X16 Riser Cable [RTX4090 RX6950XT x570 B550 Z690 Tested] Shielded High-Speed Vertical Mount Gaming PCI Express Gen4┃Dual Reverse Connectors (19cm / 7.4″) Designed for ITX](https://ziontechgroup.com/wp-content/uploads/2024/12/718A0EKUS2L._SL1500_.jpg)
